UE Transition Drive Test Methodology are using command sequence as below: 1. FTP DL 10MB 120s 2. Idle 15s
Possibilities might happend during this sequence are below:
1. While UE in Dedicated mode, it might be located in HSPA state or DCHR99 state 2. While UE in Idle mode, It might be located in RRC Idle or RRC Connected (Cell_FACH) 3. While UE in Transition mode, It might be located in DCHR99 or CELL_FACH
The information contained in this document is for reference purpose only, and is subject to change or withdrawal according to specific customer requirements and conditions.