Вы находитесь на странице: 1из 6

T301 – Rest request timeout

T301 start

1 second

T301 stop

Timer Start Stop Timer At expiry

Reception
Transmission of RRCConnectionReestablishment or
T301 of RRCConnectionReest RRCConnectionReestablishmentReject 1000 Go to RRC_IDLE
abilshmentRequest message as well as when the selected
cell becomes unsuitable
T300 – RRC CONNEC request timeout

T300 start

1 second

T300 stop
Timer Start Stop Timer At expiry

Reception
Transmission of RRCConnectionSetup or RRCConnection Perform the actions
T300 of RRCConnection Rejectmessage, cell re-selection and upon 1000 as specified in
Request abortion of connection establishment by 5.3.3.6
upper layers
T304 – HO time out

T304 start

1 second

T304 stop

Timer Start Stop Timer At expiry


Reception In case of cell change order from E-
Criterion for successful
of RRCConnectionReconfigura completion of handover to UTRA or intra E-UTRA handover,
tion message including initiate the RRC connection re-
EUTRA or cell change
T304 the MobilityControl Info or 1000 establishment procedure; In case of
order is met (the criterion
reception handover to E-UTRA, perform the
of MobilityFromEUTRACommand m is specified in the target actions defined in the specifications
essageincluding Cell Change Order RAT in case of inter-RAT) applicable for the source RAT.
T310 – RL failure
UE eNB

N310 times Out of sync is sent from 1st OOS


N310 occurrence SIB2:
lower layers. Eg. Not able to decode
times ue-TimersAndConstants {
20 consecutive subframes (PDCCH)
t300 ms1000,
t301 ms1000,
UE detects radio problems and starts T310 N310 times OOS
t310 ms2000,
n310 n20,
2 Seconds
t311 ms3000,
n311 n1 },
T310 expires and T311 starts RLF Occurs
RRC Connection Re-est
3000ms

T311 expires

Timer Start Stop Timer At expiry


Upon detecting physical Upon receiving N311 consecutive in- If security is not
layer problems i.e. upon sync indications from lower layers, activated: go to
receiving N310 upon triggering the handover RRC_IDLE else: initiate
T310 2000
consecutive out-of-sync procedure and upon initiating the the connection re-
indications from lower connection re-establishment establishment
layers procedure procedure
T311 – RL failure
UE eNB

N310 times Out of sync is sent from 1st OOS


N310 occurrence SIB2:
lower layers. Eg. Not able to decode
times ue-TimersAndConstants {
20 consecutive subframes (PDCCH)
t300 ms1000,
t301 ms1000,
UE detects radio problems and starts T310 N310 times OOS
t310 ms2000,
n310 n20,
2 Seconds
t311 ms3000,
n311 n1 },
T310 expires and T311 starts RLF Occurs
RRC Connection Re-est

3000ms

T311 expires

Timer Start Stop Timer At expiry

Upon initiating the Selection of a


RRC connection re- suitable E-UTRA
T311 3000 Enter RRC_IDLE
establishment cell or a cell using
procedure another RAT.

Вам также может понравиться