Академический Документы
Профессиональный Документы
Культура Документы
• Recirculation of discharge
• Liquid ring pump
• Dry ring pump
• Ejector
• Eccentric vane pump
Rotary Air Extraction Pump
C/L
of
Main Pump
Filter Check Valve
Air Extraction
Pump
Vessel
Float Friction
Check Clutch
Valve
Water Lever
Main A B
Centrifugal
Pump
Operating Piston
Discharge
Electrical Supply
Pressure Controller
To Bilge
Centrifugal Pump
Electrical Leads
Water Ring
Exhausters
(Vacuum Pumps)
Central
Control
Starter
Vacuum
Priming
System
Switch
Pressure
Gauge
Vacuum Tank
Solenoid Valve
Centrifugal
Pump
Suction
To Vacuum Pump
Automatic
Vent Valve
Vacuum
Tank
(with Lever
Controller)
Pump
Suction
Submerged Pump
Deck
• Hydraulic Room
• Hydraulic Pump
• Accumulator
• Pipeline to Hydraulic Motor
• Hydraulic Motor
Hydraulic Motor
• Variable speed
• Power
– High efficiency
– Energy consumption according to actual need
– Soft start (no inrush peaks)
• Control
– Independent control for each pump
– Accurate, variable control
– Low mechanical wear (impeller/casing)
– Low cavitation
– Programmable
• Minimized discharge time
• Minimum cavitation
• Liquid level
• Specific gravity
– Connection to cargo-monitoring
Stripping Procedure
• When the cargo tank is empty, the cargo
stripping pump valve has to be opened and the
main cargo valve to be closed.
• The running cargo left is purged by means of
inert gas or air via the stripping line pipe into the
cargo line on deck.
• During purging/stripping procedure, the pump
should be kept running ( the impeller acts as a
dynamic foot valve) until the cargo pipe has
purged empty
• This procedure will generate an absolute
minimum of the remaining cargo in the pump
well
Pump Body
• It is welded or flanged to the pipestack.
• The hydraulic motor is very compact and
located inside the pumphead and
surrounded by return hydraulic oil.
• Short independent shaft supported by
bearings lubricated by hydraulic oil
• Connected to the impeller.
Features
• Pump material – stainless steel
• Stepless capacity control/remote operation
• Single stage, single suction, axially balanced
• Smooth surface unit – easy to clean
• Anti-rotation brake – loading thru’ pump
• Bearing lubricated by hydraulic oil
• Designed for dry running
• In tank replacement without interfering hydraulic
section