Академический Документы
Профессиональный Документы
Культура Документы
ODR-2008-11-0052
Build Control Functionalities
Introduction:
The Build Control tool provides the user the following functionalities,
It saves programs, data libraries, local reference table definitions,
standard selection descriptors and releases them in another T24
environment.
Automatic restoration of data libraries using DL.DEFINE.
Automatic authorization of restored records using OFS.
Releasing the descriptors.
Updating the LOCAL.REF.TABLE with the saved definitions.
Compile/Catalog the programs released.
The resultant package will be saved in the path given in SAVE.PATH
field, along with an index that will be used for release operations. The
contents of the package will be similar to DL.DEFINE.
Slide 2 13/11/2007
Pre-Requisites
System Requirements:
The following are the pre-requisites for installing this package.
jBASE Release 4.1.4.xx or Higher
T24 Release R4 or higher
T24 Desktop Client Version 1.4 or higher
Slide 3 13/11/2007
Pre-Requisites
Slide 4 13/11/2007
Parameter Set-up
Slide 5 13/11/2007
Parameter Set-up
Slide 6 13/11/2007
Pre-Installation Tasks
Slide 7 13/11/2007
Installation
Slide 8 13/11/2007
Installation
Slide 9 13/11/2007
Installation
Slide 10 13/11/2007
Defining DL.PARAMETER & DL.DEFINE
Step 1:
Defining the DL.PARAMETER with the id ‘SYSTEM’ in Input Mode (I).
Slide 11 13/11/2007
Defining DL.PARAMETER & DL.DEFINE
Committing the
DL.PARAMETER
record in Input mode
Slide 12 13/11/2007
Defining DL.PARAMETER & DL.DEFINE
Slide 13 13/11/2007
Defining DL.PARAMETER & DL.DEFINE
Slide 14 13/11/2007
Defining DL.PARAMETER & DL.DEFINE
Slide 15 13/11/2007
Authorizing DL.DEFINE records
DL.DEFINE will release all the records of BUILD CONTROL into the
T24 application in IHLD status (Input Held status).
The records in the below application can be found in the Exception list
of the respective application.
These records are to be authorized in Input mode initially and then
authorized with ‘A’ mode.
S. No. File Name
1 PGM.FILE
2 STANDARD.SELECTION
3 EB.API
4 OFS.SOURCE
5 ENQUIRY
6 VERSION
Slide 16 13/11/2007
Authorizing DL.DEFINE records
Slide 17 13/11/2007
Sign-off
Now the Build Control tool has been successfully installed in your local
machine / environment !
Slide 18 13/11/2007
Configuring the System
Slide 19 13/11/2007
Configuring the System
BUILD.CONTROL.PARAMETER:
Setup the BUILD.CONTROL.PARAMETER table for all the applicable
companies as below.
The ID to this table is the COMPANY ID.
Use the version “BUILD.CONTROL.PARAMETER,MAIN” to setup this
record.
Most of the fields are automatically defaulted once the ID for this record
is entered. The user can however amend these fields based on the
local requirements.
If this record is not setup then every time a BUILD.CONTROL record is
Input / Copied / Verified then an override will be displayed with the
message “BUILD.CONTROL.PARAMETER not set! Default
Parameterisation will be used”.
Slide 20 13/11/2007
Configuring the System
Slide 21 13/11/2007
Configuring the System
Defining BP, LIB and Bin / Paths for SAVE and RELEASE:
Slide 22 13/11/2007
Configuring the System
Slide 23 13/11/2007
Configuring the System
Slide 24 13/11/2007
Thank You