Академический Документы
Профессиональный Документы
Культура Документы
(BX Ver.5)
Port assign:
Port #25 - #54 is assigned for each channels.
Reference CO setting.
ISDN-PRI card (1/2)
General Specification:
Interface 64Kbps/CH * 30B + D (2.048Mbps), 1 port
Connection DDK connector + twisted(Symmetric) pair cable (120 Ohm)
Layer-1 ETS 300 011
Layer-2 ETS 300 125 [ITU-T Q.920 / I.440 and Q.921 / I.441]
Layer-3 ETS 300 102-1 / ETS 300 102-2 and ETS 300 403-1
* Qsig protocol (ETS 300 172) is not supported.
Line Cording: HDB3 (High Density Bipolar order 3)
I/F Ref. Point T point
ISDN CO/EXT Trunk(TE) mode interface only
ISDN-PRI card (2/2)
Installation limitation:
KX-TD1232 only. (Not applicable to KX-TD816)
1 card for 1 system.
For the Master system only.
Port assign:
Port #25 - #54 is assigned for each channels.
Reference CO setting.
Details of major Features (1/7)
Lunch / Brake mode.
DIL1:1 Lunch / Break ringing group assignment added.
[150] Lunch Service Starting / Ending Time
[151] Break Service Starting / Ending Time
[457] DIL 1:1 Lunch Group
[458] DIL 1:1 Break Group
1:Normal (Default)
0:Protection mode of this problem.
1:Timing A (Default)
0:Timing B.
A Caller-ID
Bell Caller-ID
B Caller-ID
Details of other Features (3/7)
Cyclic CO line hunting mode.
You can program the cyclic hunting mode for CO-Line hunting.
[990] Area 09 X X X X X X X X X 1 X X X X X X
[990] Area 09 X X X X X X X X 1 X X X X X X X
1:Normal (Default)
0:Automatic release mode.
Details of other Features (5/7)
Priority on Caller-ID/Charge display.
You can program the manual operation mode to change the
display of your PT from the Caller-ID information to the
Duration/Charge information in the case of incoming call.
In the default situation, the Caller-ID display is automatically
changed by the system when the Duration timer/Charging is
started.
[990] Area 09 X X X X X X X 1 X X X X X X X X
[990] Area 08 X X X X X X X X X X X X X 1 X 1
[990] Area 08 X X X X X X X X X X X X 1 X X X