Traditional Staging Technology Modern Staging Technology
Traditional Marketing Modern Marketing
Traditional Ticketing Modern Ticketing Traditional System Modern System Traditional financing will generally provide the most affordable, if not the easiest, access to the funding your business needs. “Traditional” financing generally means a loan or line of credit secured through a financial institution under conventional terms, usually based on the “four Cs”: character, collateral, capital, and capacity.
Traditonal Financing Modern Financing
Traditional Security Modern Security System Old Lighting Equipment New Lighting EQUIPMENT TRADITIONAL CENTRE PIECES NEWER CENTRE PIECES Traditional Event Staffing New Staffing The Code 39 barcode is the easiest to use of alpha-numeric barcodes and is designed for character self-checking, thus eliminating the requirement for check character calculations. HIBC LIC LOGMARS MIL-STD-1189B MIL-STD-129 MIL-STD-2073-1C MIL-STD-129N A strong beam of light that illuminates only a small area, used especially to center attention on a stage performer Lightingon a stage is controlled by the stage engineer who monitors the lights through a light control console, maybe similar to one below Stage lighting is the craft of lighting as it applies to the production of theater, dance, opera and other performance arts. Several different types of stage lighting instruments are used in this discipline. In addition to basic lighting, modern stage lighting can also include effects such as lasers and fog machines. The direction for stage lighting devices will depend on the kind of lights such as spotlights, reflector spotlights, strip lights, house and work lights etc. A Public Address (PA) system is a collection of audio equipment that allows broadcasts over a designated area. Often found in schools and office buildings, PA systems can be used for general announcements or emergency information, providing a simple way to get information out quickly. PA systems can be basic or advanced, and people can customize them to fit a variety of needs. There are even personal models that can be less expensive, but allow for a much shorter range. 1. Place the speakers on the stands, probably about five to six inches high and they should be six inches apart or more. 2. Plug the speaker leads into the connectors. These can be found at the back portion of of the speaker or amplifier. 3. On the socket of the amplifier, plug the microphone lead. 4. Use the speaker lead to connect the amplifier into the input socket of the monitors. 5. Check all volume levels and power switches . All of them should be turned off to make sure that all the leads are connected correctly before switching the power on. 6. Lastly, the extension power leads. Plug in the amplifier. Switch on the power