Вы находитесь на странице: 1из 19

RECENT TRENDS IN

CIVIL ENGINEERING PRACTICES

SUMITA DEY
General Manager (Engineering)
Mani Square Limited
Kolkata

25th September 2014


PREAMBLE

Civil Engineering is regarded to be the mother of all engineering.


Although building homes, roads, bridges, sewerage etc. is as old
as civilisation itself, we continually see new trends emerging.

New thoughts, innovations and


techniques are fast replacing age
old practices and traditional
methods of construction.

Like in every other field, the real


estate sector has also seen a
number of such innovations and
adoption of the state-of-the-art in
construction techniques.
SOME RECENT INNOVATIONS
TALL BUILDINGS

All over the world builders are starting to build higher and
higher. In India, mainly in the metropolises, the skyline has
risen.

In Kolkata, due to a set of new


building laws, builders have started to
add floors to buildings already under
construction.

New buildings are being planned for heights


hitherto unheard of in the city of Kolkata.
The structural engineer has to find ways and
means to make the structure capable to
withstand the additional loads, to reduce the
loads or simply to make more correct
assumptions and recalculate loads.
ADVENT OF SOFTWARE

The advent of latest and powerful software and hardware take


seconds to analyse the model of a huge multi-storeyed building.
This makes innumerable iterations possible in no time.
REDUCTION OF LOADS

AAC Blocks
Air entrained autoclaved blocks are
basically lightweight bricks. The
specific gravity of these bricks are
less than half compared to
conventional clay or fly-ash bricks.

Steel Floor Plates


Extending an RC building by using
steel columns/steel beams and a thin
layer of concrete slab for buildings
whose foundations and lower level
columns have already been
constructed.
REDUCTION OF LOADS (cont’d)

RC Load Bearing Walls


Walls may be designed
as RC load bearing
members. Use of
aluminium formwork
system like ‘Mivan’, in
which 160 mm thick RC
external and internal
walls carry the loads. As
a result… no columns, no
beams and reduced slab
thickness due to smaller
panels.
What has made tall buildings possible in Kolkata
where the sub-soil conditions are hardly
conducive to weighty structures?
Other than social and psychological barriers,
Kolkata was probably missing the ‘structural’
atmosphere to build structures that would kiss
the clouds.
SOME MORE RECENT INNOVATIONS
HIGH GRADE CONSTRUCTION MATERIAL

For reinforcing steel, Fe 250 gave way to


Fe 415, which made way for Fe 500. We now
use Fe 550 or Fe 600.

For concrete, M 15 gave way to M 20, which


made way for M 25. The number after ‘M’
kept on increasing and reached the
improbable figure of 70 i.e. M 70, which is
quite common these days.
TYPICAL DESIGN MIX FOR M40 GRADE CONCRETE

o Cement (OPC) – 360 Kg


o Flyash – 120 Kg
o 20 mm down aggregates – 592 Kg
o 10 mm down aggregates – 484 Kg
o Sand (Zone II) – 718 Kg
o Water – 158 Kg (w/c ratio = 0.33)
o Admixture – 2 Kg (@0.4%)

 Strength at 7 days – 32 to 36 MPa


 Strength at 28 days – 45 to 49 MPa
METHODS OF SHUTTERING/STAGING AND DETAILING

The ’Rail Climbing’ system have helped to increase the speed of


construction manifold.
METHODS OF SHUTTERING/STAGING AND DETAILING

In another system of staging, the props are left in place and


only the shutters are removed.
METHODS OF SHUTTERING/STAGING AND DETAILING

Use of couplers instead of lapping of bars has helped reduce


congestion and wastage. It is also possible to have 100% lap at
one place, as per code.
METHODS OF SHUTTERING/STAGING AND DETAILING

Creation of safety platform has helped in enhancement of


worker productivity by creating a psychological feeling that
they are working at ground level. This has contributed to a
large extent in increasing the speed of work.
CONCLUSION

This presentation dealt with only a particular sector of Civil


Engineering and some of the recent trends being adopted.

I have, however, scratched only the surface.

Scores of innovations and modern techniques have come in


vogue during the last decade, both in design and execution.

Every day, some new technique


is being introduced at some
part of the globe thereby
encouraging smarter designs,
slicker structures, robust and
safer construction practices.
THANK YOU

Вам также может понравиться