Академический Документы
Профессиональный Документы
Культура Документы
Suture Materials
Criteria
– Tensile strength
– Good knot security
– Workability in handling
– Low tissue reactivity
– Ability to resist bacterial infection
Suture Materials
ABSORBABLE: NON-
lose their tensile strength ABSORBABLE:
within 60 days.
Absorbable Sutures
PLAIN GUT: CHROMIC GUT:
Derived from the small Treated with chromic
intestine of healthy acid to delay tissue
sheep. absorption time.
Loses 50% of tensile 50% tensile strength by
strength by 5-7 days. 10-14 days.
Used on mucosal Used in episiotomy
surfaces. repairs.
•Polyglycolic acid (Dexon®)
Braided
Low-memory
50% tensile strength = 25 days
Sites = subcutaneous closure skin
Polydioxanone (PDS®)
Monofilament
50% tensile strength = 30+ days
Sites = need for prolonged strength,
Polyglycan 910 (Vicryl®)
Braided, synthetic polymer
50% tensile strength for 30 days
Used: subcutaneous
Non-absorbable Sutures
Nylon (Ethilon®): of all the non-
absorbable suture materials, monofilament
nylon is the most commonly used in surface
closures.
Non-absorbable Sutures
Polypropylene (Prolene®): appears to be
stronger then nylon and has better overall wound
security.
BRAIDED: includes cotton, silk, braided nylon
and multifilament dacron. Before the advent of
synthetic fibers, silk was the mainstay of wound
closure. It is the most workable and has excellent
knot security. Disadvantages: high reactivity and
infection due to the absorption of body fluids by
the braided fibers.
Suture Sizes
#15 blade
Dermabond®
A sterile, liquid topical skin
adhesive
Reacts with moisture on
skin surface to form a
strong, flexible bond
Only for easily
approximated skin edges of
wounds
– punctures from minimally
invasive surgery
– simple, thoroughly cleansed,
lacerations
Anesthetic Solutions
Lidocaine (Xylocaine®)
– Most commonly used
– Rapid onset
– Strength: 0.5%, 1.0%, & 2.0%
– Maximum dose:
5 mg / kg
300 mg
– 1.0% lidocaine = 1 g lidocaine / 100 cc = 1,000mg/100cc
– 300 mg = 0.03 liter = 30 ml
Anesthetic Solutions
Lidocaine (Xylocaine®) with epinephrine
– Vasoconstriction
– Decreased bleeding
– Prolongs duration
– Strength: 0.5% & 1.0%
– Maximum individual dose:
7mg/kg, OR
500mg
Anesthetic Solutions
CAUTIONS: due to its vasoconstriction
properties never use Lidocaine with epinephrine
on:
– Eyes
– Ears
– Nose
– Fingers
– Toes
– Penis
– Scrotum
Anesthetic Solutions
Mepivacaine (CARBOCAINE):
– Slower onset than Lidocaine
– Longer duration
– Strength: 1%
– DOSE: maximum individual dose 5mg/kg
Anesthetic Solutions
BUPIVACAINE (MARCAINE):
– Slow onset
– Long duration
– Strength: 0.25%
– DOSE: maximum individual dose 3mg/kg
Injection Techniques
25, 27, or 30-gauge Aspirate
needle Inject agent into tissue
6 or 10 cc syringe SLOWLY
Check for allergies Wait…
Insert the needle at the After anesthesia has
inner wound edge taken effect, suturing
may begin
Complicated Wounds
Puncture wounds
Animal bites
Tendon, verve, or vessel involvement
Wound more than 12 hours old
Closure Types
Primary closure (primary intention)
Personnel Precautions
Wound Preparation
Wound cleansing solution
Wound scrubbing
Irrigation
– Take only the soft, flexible part from an 18
gauge IV needle (angiocath)
– Put angiocath tip on 20 cc or 50 cc syringe
Debridement
Basic Laceration Repair
Suture Techniques
Suture Procedures
Suturing
Apply the needle to the needle driver
– Clasp needle 1/2 to 2/3 back from tip
Rule of halves:
– Matches wound edges better; avoids dog ears
– Vary from rule when too much tension across
wound
Suturing
Rule of halves
Suturing
Rule of halves
Suturing
The needle enters the skin with a 1/4-inch
bite from the wound edge at 90 degrees
– Visualize Erlenmeyer flask
– Evert wound edges
Because scars contract over time
Suturing
Release the needle from the needle driver, reach
into the wound and grasp the needle with the
needle driver. Pull it free to give enough suture
material to enter the opposite side of the wound.