Академический Документы
Профессиональный Документы
Культура Документы
=-IDRS
2 2
V V / 3 .4
I D I DSS 1 GS I DSS 1 0.5I DSS
GS ( off )
V V
GS ( off ) GS ( off )
JFET Midpoint Biasing-self bias-formula
method
The value of RS needed to establish VGS can be determined
by the relationship below.
RS = | VGS/ID |
VS must be more +ve than VG in order to keep VGS reverse-biased (-ve value).
Drain current, ID = (VDD – VD)/RD or
Since ID=IS, then ID=VS/RS
JFET Biasing-voltage-divider bias-
graphical
• In using the transfer characteristic curve to determine the
approximate Q-point we must establish the 2 points for the
load line.
•1st step draw dc load line:
• The first point is ID = 0 and VGS =VG.
VS=IDRS=(0)RS=0V
VGS=VG-VS=VG-0=VG
The 2nd point is for VGS=0,
ID=(VG-VGS) / RS = VG / RS
ID=VG / RS and VGS=0.
• The point at which the load line intersect with transfer characteristic
curve is Q-point.