Академический Документы
Профессиональный Документы
Культура Документы
Submitted by –
310 Chirag Garg
313 Divya Kathuria
319 Nikhil Mangla
320 Prakriti Goyal
333 Dheeraj Saluja
PVC FALSE CEILING
SPECIFICATIONS FEATURES
- It has non porous and non absorbent qualities - Innovative
- Bright , durable and hygienic surface - Less space consumed
- Water and termite proof - Fine quality
- Fire retardant
- Easy to install
- Maintenance free
- Easily cleaned
- Widely use across the globe
- Ideal for beautification of homes , office and Public spaces
PANEL SECTIONS
PANEL SECTIONS :
- Normal Section
- Heavy section
- Super heavy sections
Tools required
1. Pneumatic nail gun
2. Galvanized finish nails or screws
3. Construction adhesive
4. Electronic Stud Finder
5. Caulking gun
6. White caulk
7. Any wood cutting saw: circular saw, hacksaw, jig saw, band saw, etc.
8. Sandpaper or sanding block
PANEL SECTIONS
End cap
Using screws
and staples
WEATHER BASED INSTALLATION –
Recommended Adhesive
Industrial Strength Adhesive or similar construction adhesive (rated for use on PVC).
Mechanical Fastening
Use either exterior or interior screws, or nails as appropriate for ceiling panel installation
Site images
PROS -
- long term durability.
- very easy to weight.
- doesn't crack easily under stress.
- doesn't crack when being drilled even if drilled close to the edge P.V.C Ceilings are inexpensive to
make and install
- Easy to manipulate
- They are mass produced, meaning that they are available through a wide variety Of distributors
and in practically every color imaginable
CONS -
- is like plastic and tends to deform due to low melting point.
- cannot be placed near halogen or incandescent lamp.
- cannot be polished to restore its clarity.
- Ensure that PVC Ceilings are not exposed to direct sunlight. There are no UV stabilizers in the
product and exposure to direct sunlight will alter the color over time.
COSTING
SPECIFICATIONS:
- Water proof
- Heat proof
- Damp proof
- Rust proof
- Rot proof
- Fire retardant
- Easy to maintain
- Sound Resistant
- Impact Resistant
- Light in weight
- Saves a lot of time
- Very economical
- Easy to cut, drill, nail and saw
APPLICATION:
Kitchen, Meeting room, Living room, Bedroom, Balcony, Hotel, Pass way, Office, background, KTV,
Toilet, Hospital, Supermarket, Restaurant, School.
INSTALLATION
Silicon installation
1.1. Install the basic materials (usually use a 3mm thick Plywood, wooden board or Magnesium board)
by nail.
2.Cut the UV panel to suitable size and repair the wound to be smooth by Sandpaper.
3.Chamfering of edge to be 45 degree angle. According to the practical requirements, you can choose
chamfering two sides, threes edges or even four round.
4.Clean the back side of UV panel by sandpaper or duster cloth; make sure that the back side is 100%
clean.
5.Apply the Silicone onto the back side of UV panel, sticking UV panel to the wall, hold on for a while
and knock the panel slightly by one hand. Make sure that the panel and wall are matted then you can
move on.
6.Filing the filler to the 45 degree angle connecting position of two panels to seal the connection.
7.Clean the wall and your room..
UV decorative panel can be directly paste on the wall by silicone if your base wall is smooth.
CONS
- Joints are visible while installation due to restricted sheet size availability
- Cannot be reinstalled or reused at different locations
- Less preferred over PVC ceilings
- Beading available in silver and golden color only. Preferable for aesthetic purpose on pillars (in
banquets)
COSTING
SIZE – 8 x 4 Feet
THICKNESS – 3 mm and 4 mm