Submittals: •50m MLS Tower Design Report. •Collapse Failures modes Pictures. •As built history records. •Some usefull information. Requirements: Structural Design Review Requirements continue 2. Causes of failures. 3. Structural design integrity of the tower. 4. Design data verification regarding: 1. Wind loads/Location/Direction . 2. Ancillaries, antenna, cable trays, feeders and n site and Design Report Data: Differences: reduced sections & Bolts: 1.On site, tower mark 50m MLT not 50m MLS. 2.On site, some executed sections are different than that mentioned in the design report as: • Legs st. (17). • Horizontals at, H27-21, H20-12 and H9. • Bolts on legs: LL 17-15, LL10-9, issing Data in Design Report :
Zain Specifications for self
supporting Tower Treatment and specifications for minimum normal operation. 1. Missing Leg Connector details. 2. Side Bent Connector. 3. Central Connector. 4. Tower Stub Leg inclination Codes used in Analysis and Design:
1.SABS 0160 for loading:
Valid but Limited. 2.SABS 0162 for design: Not Valid for Tower design. 3.SABS 0106 for foundation: Valid. 4.PROKON for analysis and Valid Design Codes:
1.BS 8100 Parts (1-2-3)
-1986. Loading and Sections Design
2. TIA / EIA G-222
Loading and Sections Design Data and Parameters used in Review: 1.Hourly wind speed is 31m/s. equivalent to 49.2m/s. 2.Performance requirements: • Safety and service life. • Classification required reliability. • Environmental conditions. • Economical consequences. • Classification of quality. • Wind resistance. Data and Parameters used in Review: Continue •Drag Coefficient. (Manufacturer/Wind Tunnel) •Tower Triangulation (affects moments in tower). •Method of analysis (static / dynamic-spectral). •Allowable deflection of towers. •Fatigue and periodic inspection. •Cross wind response due to Review Methodology: 1. Analysis and design is done by MS- Tower V6.0. 2. Tower sections are taken from what has been executed on site. 3. Material strength and other properties are taken from the design report. (Zain QA & QC). 4. Wind Velocity is taken from Sudan Wind Map. 5. Ancillaries loads are taken from Zain. 6. Drag coefficient are calculated by Continue – Methodology: 8.Lowering tower height is first option when it is possible without affection Antenna or Microwaves or any other important ancillaries. 9.Lowering Antenna or Microwaves whenever it is possible without affecting normal operation. 10.Removal of any unused height whenever it is possible together with item (9). 11.Leg strengthening is completely avoided as it requires the dismantle Recommendations:
Refer back to the
Previous drawings with all the fixation methods. Or: Modifications for Thanks for your Time Ready for any Questions?