Академический Документы
Профессиональный Документы
Культура Документы
Complete a
shutdown on the
core and power
off the ATM
before you start
to remove the
UEPP
USB to Touch
Screen Light Sensor
DC Power
Video
4. Disconnect the harnesses, you may leave the video cable connected
Remove the LCD Monitor
Plunger
Plunger
Remove the Touch Screen
7. Press down on each latch and push the top of the Touch Screen out toward
the front of the ATM
Note the retaining wires will catch the Touch Screen while you walk around to
the front of the ATM to finish removing the Touch Screen
Finish Removing the Touch Screen
8. From the front of the ATM remove the retaining wire loops off the studs and place the
Touch Screen in a safe place
Remove the shutters
Stud Screws
Remove the keyboard support plate
Screw
Note: The picture was taken with the dispenser shutter still in the ATM. Please remove it first.
12. Remove screw and slide the keyboard support plate back and remove it from the ATM. The keyboard will drop
down.
13. Slide keyboard back and out of the ATM, disconnect the harnesses on the keyboard. See next page for additional
details.
Viewed from the front of the ATM