Академический Документы
Профессиональный Документы
Культура Документы
COLLEGE
MANICKAMPALAYAM
Department of EEE
SUBMITTD BY:
S.NO NAME OF THE STUDENT REGISTER NO
1. ABINESH.J 15308816
2. CHANDRAN.N 15308821
3. DINESHKUMAR.R 15308824
4. EMAIYA.K 15308827
5. RAMESH.R 15308861
6. MARGO.T 15324263
• When the user sends a SMS via a registered number from his mobile phone, it is
received by SIM300 GSM modem at the receiver’s end. SIM300 is duly interfaced
through a level shifter IC MAX32 to the microcontroller. The messaged is thus
fetched into the microcontroller. It is further displayed on an electronic notice
board which equipped with LCD display interfaced to microprocessor powered by a
regulated power supply from mains supply of 230 volts ac. This project is our
experiment on real time noticing.
BLOCK DIAGRAM:
CIRCUIT DIAGRAM:
How to Operate?
• Write the program to the wireless electronic notice board using keil software
• Now burn the program to the microcontroller with the help of flash magic.
• Give the connections as per the circuit diagram.
• Use power supply circuit to provide 5V DC to the microcontroller
• Insert the SIM (Subscriber Identity Module) to the GSM module.
• Now switch on the supply
• Send SMS to the GSM module using other mobile
• Now you can see the same message on LCD.
SIMCOM SIM900A GSM Module:
This is actual SIM900 GSM module which is manufactured by SIMCOM . Designed for global
market, SIM900 is a quad-band GSM/GPRS engine that works on frequencies GSM 850MHz,
EGSM 900MHz, DCS 1800MHz and PCS 1900MHz. SIM900 features GPRS multi-slot class 10/
class 8 (optional) and supports the GPRS coding schemes CS-1, CS-2, CS-3 and CS-4. With a tiny
configuration of 24mm x 24mm x 3mm, SIM900 can meet almost all the space requirements in
User’s applications, such as M2M, smart phone, PDA and other mobile devices.
MAX232 IC:
The MAX232 is an integrated circuit that converts signals from an RS-232
serial port to signals suitable for use in TTL compatible digital logic circuits,
so that devices works on TTL logic can share the data with devices
connected through Serial port (DB9 Connector).
PIC MICROCONTROLLER:
16×2 Liquid Crystal Display which will display the 32 characters at a time in two rows (16
characters in one row). Each character in the display of size 5×7 pixel matrix, Although this
matrix differs for different 16×2 LCD modules if you take JHD162A this matrix goes to 5×8.
This matrix will not be same for all the 16×2 LCD modules. There are 16 pins in the LCD
module, the pin configuration us given below
POWERSUPPLY:
APPLICATION:
• Used in bus stations, railway stations, parks, etc. to display the messages wirelessly
• This Project is used in colleges and organizations.