100%(1)100% нашли этот документ полезным (1 голос)
968 просмотров20 страниц
Radiographic testing is the non-destructive testing to observe the various defects in the weld joints. It is most common in piping fabrication workshops. 100% weld joint in High pressure vessels / pipes are radiographed.
Radiographic testing is the non-destructive testing to observe the various defects in the weld joints. It is most common in piping fabrication workshops. 100% weld joint in High pressure vessels / pipes are radiographed.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PPTX, PDF, TXT или читайте онлайн в Scribd
Radiographic testing is the non-destructive testing to observe the various defects in the weld joints. It is most common in piping fabrication workshops. 100% weld joint in High pressure vessels / pipes are radiographed.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PPTX, PDF, TXT или читайте онлайн в Scribd
DEFECTS OBSERVED IN RADIOGRAPHIC
TESTINGWhat is Radiographic Testing
* It is the non-destructive testing to observe the
various defects in the weld joints.
* It is most common in Piping fabrication
workshops.
* 100% weld joints in High pressure
vessels/pipes are radio-graphed.How radiograph testing is done in case
of piping spools.
* The welded joint is placed before the undeveloped
film.
* The source emits x-rays or gamma rays which
penetrates through the welded part.
* The bead formed by weld pool is having different
density as compared to the parent material and hence
it allows less or more rays to pass through it.Finally we
get imprints on the film.
For a perfect joint , Joint efficiency factor should be
more then 1.
We are assigning particular film for certain marked
welded joint to re-weld in case of defect.