Академический Документы
Профессиональный Документы
Культура Документы
Learning Objectives:
What is METAL? Different Types of Metals Ferrous, Non-Ferrous, Alloys Main focus of Ferrous Metals Properties of Metals Characteristics of Ferrous Metals with examples Advantages/Disadvantages of Ferrous Metals
METALS
Metals are Solid at room temperature, except mercury, which is liquid ! very high melting point. shiny when they cut. good conductors of heat and electricity. usually strong & malleable so they can hammered into shape. Metals have Metals are Metals are Metals are be
METALS
METALS
METALS
METALS
Ferrous Alloys Containing iron & mixture of almost all are magnetic. small e.g. mild-steel, cast-iron, toolsubstance Steel etc. Ferrous Alloys Alloys Non-Ferrous Do not contain iron. e.g. aluminium, copper, silver, gold, lid, tin etc. A metals, or a metal & amount of other
Non-Ferrous
METALS
METALS & ALLOYS Metals are available in pure or alloy form. Pure Metals such as pure aluminium or pure copper, contain only one type of metal. They are not mixed with any other metal. Alloys are mixture of two or more pure metals. Alloys tend to have better strength properties than pure metals. Alloys and pure metals often have special physical properties.
PROPERTIES OF METALS
1. Strength - The ability of a material to stand up to forces being applied without it bending, breaking, shattering or deforming in any way.
2.
Elasticity - The ability of a material to absorb force and flex in different directions, returning to its original position.
3.
4.
Ductility - The ability of a material to change shape (deform) usually by stretching along its length.
PROPERTIES OF METALS
5. Tensile Strength The ability of a material to stretch without breaking or snapping.
6.
7.
Toughness - A characteristic of a material that does not break or shatter when receiving a blow or under a sudden shock. Conductivity - The ability of a material to conduct electricity.
8.
PROPERTIES OF METALS
9. Hardness The ability of a material to resist scratching, wear and tear & indentation.
FERROUS-METALS
1. Mild Steel
Composition: Iron alloy with 0.3% carbon Properties: Malleable and ductile, and therefore bends fairly easily Uses: nuts, bolts, screws, tubes etc.
Methods of Identification Appearance: Bright drawn mild steel has a smooth, bright surface; black mild steel is covered with a blue-grey oxide Dropping: Gives out a ringing note Grinding: Gives off a shower of long white sparks Effect of Heating: Slightly tougher but little change
FERROUS-METALS
2. Tool Steel / cast steel / carbon steel
Composition: Iron alloy with 0.5%-1.5% carbon Properties: Tough rather than hard, and fairly ductile Uses: Springs and most tools such as hammer heads, drills, chisels, shears etc
Methods of Identification Appearance: Has a smooth skin of black oxide Dropping: Gives out a high ringing note Grinding: Moderate number of red sparks Effect of Heating: Becomes hard and brittle
FERROUS-METALS
3. cast iron
Composition: Iron alloy with 2%-4% carbon Properties: Brittle, snaps before it will bend. Strong in compression Uses: Vices, cylinder blocks for car engines, frames for most machines
Methods of Identification Appearance: Grey with a granular surface Dropping: gives out a dull note Grinding: Gives off a few dull sparks Effect of Heating: No change
3. 4.
5. 6. 7. 8.
RECAP
Metal Different types of metals ferrous, non-ferrous, alloy non-ferrous, alloy Properties of metals Strength Elasticity Plasticity ductility tensile strength malleability toughness conductivity hardness Examples of ferrous metals, uses, methods of identification Advantages Disadvantages Homework