Академический Документы
Профессиональный Документы
Культура Документы
The casting process is subdivided into two distinct subgroups: 1 - Expendable mold casting
(sand, plastic, shell, and investment (lost-wax technique) mouldings.)
Classification of die casting: (a)Gravity Die Casting (also called permanent mould process) (b)Pressure Die Casting
(I
(Image co rtes : i i)
There are two basic types of die casting machines: (1)hot-chamber machines (2) cold-chamber machines
(Image co rtes : i i)
cold-die-casting machine
(Image co rtes : i i)
The local solidification time can be calculated using Chvorinov's rule, which is:
Str ct re:
(Image co rtes : i i)
Minimum wall thicknesses and minimum draft angles for die casting are :
Material
Aluminum alloys
0.9 mm
0.5
Zinc alloys
0.6 mm
0.25
1.25 mm
0.7
Die casting materials: Zinc: the easiest alloy to cast; high ductility; high impact strength; easily plated; economical for small parts; promotes long die life. Aluminum: lightweight; high dimensional stability for complex shapes and thin walls;. Magnesium: the easiest alloy to machine; excellent strengthto-weight ratio; lightest alloy commonly die cast. Copper: high hardness; high corrosion resistance; highest mechanical properties of alloys die cast; excellent wear resistance.
Material
Silicon
Copper
Properties
8.5 %
3.5 %
324 (47)
11 %
4%
331 (48)
Easy to fill
9.5 %
0.6 %
317 (46)
17 %
4.5 %
283 (41)
Advantages:
Excellent dimensional accuracy Smooth cast surfaces (1 2.5 m rms). Thinner walls can be cast Inserts can be cast-in (such as threaded inserts, heating elements ) Reduces or eliminates secondary machining operations. Rapid production rates. tensile strength as high as 415 MPa .
Disadvantages:
Casting weight must be between 30 grams and 10 kg Casting must be smaller than 600 mm High initial cost. Limited to high-fluidity metals. A certain amount of porosity is common. Thickest section should be less than 13 mm A large production volume is needed to make this an economical .
THANK YOU