Вы находитесь на странице: 1из 2

Mobile Terminating/Originating Call Establishment

MS
RSS L1 RSS

BTS

BSC

RRSM/RCI

CRM/AM

SM MTP L3 (pre -proc)

SSM

MTP/MSC

Paging Request

Paging command Pegged per message: ACCESS_PER_PCH Possibly increase: PCH_AGCH_Q_LENGTH PCH_Q_PAGE_DISCARD

Page Mobile request

paging
For every decoded paging message: Page_req_from_msc For every undecoded paging message: Page_req_from_msc_fail

RSS RSS L1 ABIS Channel request Channel RACH request Inv_est_cause_on_rach access_per_rach Channel required ok_acc_proc_suc_rach

Last SDCCH? Chan_req_cause_atmpt Busy_SDCCH channel required sdcch_congestion received assignment reject Channel assigned No SDCCH? alloc_SDCCH_fail ALLOC_SDCCH

Chan_req_ms_blkd Immediate assignment reject AGCH

Immediate channel activation

channel activation acknowledge Access_per_AGCH Immediate assignment command Immediate assignment AGCH Establish indication SABM SDCCH UA CM service request Layer 3 Initial Message Paging Response

BSC
T3101 is started to Wait for establish Indication Ok_acc_proc ms_access_by_type T3101 expires, peg Chan_req_ms_fail No ok_acc_proc is pegged

SM

SSM

MS power control

DTAP Message
Authentication Response

DTAP Message
DTAP Message

Initial Layer 3 message Connection Request CM service Sccp_tconn_est request Conn_req_to_msc Connection Confirm Connection Refused DTAP Message: Authentication request Conn_refused DTAP Message
DTAP Message DTAP Message

Classmark enquiry
Classmark change

Request classmark
update classmark

classmark request
Classmark update

Ciphering mode command Ciphering mode complete Missing measurement report Missing measurement report Link_fail declared Error Indication

Classmk_update_fail ciphering request Cipher_comp_ms Ciphering successful Cipher_comp_ms timeout RF_LOSSES_SD

cipher mode request Ciphering_successful Ciphering mode complete Ciphering_successful expires Cipher_mode_fail clear request Clr_req_to_msc

No ciphering Successful received Radio Channel Release

DTAP: TMSI reallocation DTAP: setup DTAP: call proceeding

Mobile Terminating/Originating Call Establishment


MS
RSSL1 RSS

BTS

BSC

RRSM/RCI

CRM/AM

SM

SSM

MTP/MSC

DTAP: TMSI reallocation DTAP: setup DTAP: call proceeding No queuing allowed or Initiate assignment queue is full and all Assignment resource assign_successful TCHs busy. request DR not in operation. resource not available Alloc_tch_fail Unsuccessful Ma_cmd_to_ms_blkd assignment Force queue Calls_queued BSSMAP_T11 Tch_q_length Assignment queued Physical context request Physical context confirmed channel activation channel activation acknowledge Assignment command Assignment failure Assignment command SABM FACCH UA Assignment complete Assignment command Assignment failure Assignment command Assignment channel assigned ALLOC_TCH TCH_usage Busy_TCH TCH_congestion assignment request ma_req_from_msc And maybe: efr_req_from_msc Or: Ma_req_from_msc_fail Assignment failure

Queuing indication No queuing message is sent to MSC when Direct Retry is used

BSSMAP_T10(T3107) MA_CMD_TO_MS Ma_fail_from_ms Second_assign_atmpt MA_CMD_TO_MS

Assignment complete second_assign_suc Assignment successful Connection request Switch response success

No assignment complete received, then BSSMAP_T10(T3107) expires Missing measurement report Missing measurement report Missing measurement report Link_fail declared Error Indication

Assignment complete

Total_calls Ma_complete_to_msc

No assignment channel Assigned received, then Radio channel released BSSMAP_T11 Expires Release request Or: No switch response success received RF_LOSSES_TCH Radio Channel Release assign_successful expires clear request Clr_req_to_msc

DTAP: Disconnect, network -- MS Or : DTAP: Disconnect MS network, <FACCH> DTAP: Release, call clear Release radio channel Radio channel released Deallocate SCCP number

Clear command

Channel release

Clear complete SCCP Release SCCP Release complete

Notes: different colours mean parallel possible status happening.

Вам также может понравиться