Академический Документы
Профессиональный Документы
Культура Документы
Mechanics of Materials II
UET, Taxila Lecture No. (6)
4/29/12
Cylindrical or spherical pressure vessels are commonly used in industry to carry both liquids and gases under pressure.
Click to edit Master subtitle style 4/29/12
Classification of applications
Cylinders find many applications, two of the most common categories being : Click a- fluid to edit Master subtitle style such as : containers pressure vessels, hydraulic cylinders, gun barrels, pipes, boilers and tanks. b- interference-fitted bearing 4/29/12 bushes, sleeves and the like.
n
Other applications
n
Cylinders can act as beams or shafts eg. ( load building blocks) but in the present Click to edit Master subtitle style chapter cylinders are loaded primarily by internal and external pressures due to adjacent fluids or to contacting cylindrical surfaces.
4/29/12
Pressure Loading
When the pressure vessel is exposed to this pressure, the material comprising the vessel is subjected to pressure loading, and hence stresses, from all directions.
Click to edit Master subtitle style 4/29/12
The normal stresses resulting from this pressure are function of : 1- the radius of the element under Click to edit Master subtitle consideration, style 2- the shape of the pressure vessel (i.e., open ended cylinder, closed end cylinder, or sphere) 3- the applied pressure.
4/29/12
Two types of analysis are commonly applied to pressure vessels. The most common method is based on a simple mechanics Click to edit Master subtitle style approach and is applicable to thin wall pressure vessels which by definition have a ratio of inner radius (r), to wall thickness (t) of r/t 10.
4/29/12
The second method is based on elasticity solution and is always applicable regardless of the r/t ratio and can be referred to as the solution for thick wall pressure vessels.
Click to edit Master subtitle style 4/29/12
Click to edit Master t/d < 1/20 subtitle style > 1/20 t/d
4) Material is linear-elastic, isotropic and homogeneous. n 5) Stress distributions throughout the wall thickness will not vary Master subtitle style Click to edit n 6) Element of interest is remote from the end of the cylinder and other geometric discontinuities. n 7) Working fluid has negligible weight. 4/29/12
n
1- THIN CYLINDERS
4/29/12
4/29/12
Classifications of Cylinders
Cylinders are classed as being either : n open - in which there is no Click to edit Master subtitle style axial component of wall stress, or n closed - in which an axial stress must exist to equilibrate the fluid pressure.
4/29/12
4/29/12
When a thin-walled cylinder is subjected to internal pressure, three mutually perpendicular principal stresses will be set up in the cylinder material.
Click to edit Master subtitle style 4/29/12
Types of stresses
Namely: 1- The circumferential or hoop stress. 2- The longitudinal stress. 3- The radial stress.
Click to edit Master subtitle style 4/29/12
Provided that the ratio of thickness to inside diameter of theeditcylinder is less than Click to Master subtitle style 1/20, it is reasonably accurate to assume that the hoop and longitudinal stresses are constant across the wall thickness. 4/29/12
Also, the magnitude of the radial stress set up is so small in comparison with the hoop and longitudinal stresses that it can be neglected.
Click to edit Master subtitle style 4/29/12
This is obviously an approximation since, in practice, it will vary from zero at the outside surface to a value equal to the internal pressure at the inside surface.
Click to edit Master subtitle style 4/29/12
For the purpose of the initial derivation of stress formulae it is also assumed that the ends Click to edit Master subtitle style of the cylinder and any riveted joints present have no effect on the stresses produced; in practice they will have an effect and this will be discussed later.
4/29/12
Thin cylinders under internal pressure Click to edit Master subtitle style
4/29/12
4/29/12
This is the stress which is set up in resisting the bursting effect of the applied Click to edit Master subtitle style pressure and can be most conveniently treated by considering the equilibrium of half of the cylinder.
4/29/12
It is required to calculate the hoop stress in terms of: n Pressure (p) n Inner diameter (d) n Thickness (t)
n
Click to edit Master subtitle style 4/29/12
Half of a thin cylinder subjected to internal pressure showing the hoop and longitudinal stresses acting on any element in the cylinder surface.
Click to edit Master subtitle style
4/29/12
Consider the equilibrium of forces in the x-direction acting on the sectioned cylinder shown in figure 2. It is assumed that the circumferential stress H (or ( is constant through the thickness of the cylinder.
Click to edit Master subtitle style 4/29/12
Figure (2)
4/29/12
Calculating the total force owing to internal pressure n Total force on half-cylinder owing to internal pressure
Click to edit Master subtitle style
4/29/12
stress H set up in the cylinder walls= Force Click to edit Master subtitle style =
4/29/12
4/29/12
Longitudinal stress
4/29/12
Longitudinal stress
n
End Section of Cylindrical Thin-Walled Pressure Vessel Showing Pressure and Internal Axial Stresses
4/29/12
Now consider the equilibrium of forces in the z-direction acting on the part cylinder shown in next figure .
Click to edit Master subtitle style 4/29/12
4/29/12
4/29/12
For the thin-wall pressure vessels where D >> t the cylindrical cross-section area may be approximated by
4/29/12
Dt.
4/29/12
4/29/12
Changes in dimensions:
Click to edit Master subtitle style
4/29/12
The change in length of the cylinder may be determined from the longitudinal strain by neglecting the radial stress.
Click to edit Master subtitle style 4/29/12
4/29/12
And change in length = longitudinal strain x original length Click to edit Master subtitle style Then change in length =
n
4/29/12
As above, the change in diameter may be determined from the strain on a diameter, i.e. the diametral strain.
Click to edit Master subtitle style 4/29/12
Now the change in diameter may be found from a consideration of the circumferential change. n The stress acting around a Click to edit Master subtitle style circumference is the hoop or circumferential stress H giving rise to the circumferential strain H.
n
4/29/12
4/29/12
4/29/12
4/29/12
Change in Diameter
4/29/12