Академический Документы
Профессиональный Документы
Культура Документы
TRAINING AT UCIL,TURAMDIH
INTRODUCTION
AXERA D05 126-126XL is intended for use in mining, preparation work and tunnelling. It is an independently operating hydraulic rig that drills vertical, inclined and horizontal holes. Jumbo drills are used in mining, for making drills in all direction. The tamrock Axera D05-126 is a single boom electrohydraulic jumbo for mining development in cross section up to 38 m2.
The robust universal boom have a large optimum shaped coverage, 360 rotation and full automatic parallelism for fast and easy face drilling. The boom can also be used for cross-cutting and bolt-hole drilling. The jumbo layout is designed for good visibility and balance, this and the powerful four-wheel-drive articulated carrier ensure fast and safe manoeuvering in narrow drifts. The high performance drilling system allows high drilling performance with good drill steel economy and high machine reliability. The operator environment and added automatic functions allow the operator to concentrate on safe, fast and accurate drilling. All the service points are well protected but easy to access.
MAIN SPECIFICATIONS: Carrier Rock drill Boom Feed Length Width Height Turning radius Tramming speed 1*CB05 1*HL 510 S-38 1*B 26 F 1*TF 500 11.42 m 1.75 m 2.10 m 3.02 m 5.22 / 2.98 m 12 Km / h 5 Km / h 35 % < 98 dB (A) 11 Tonne
BOOM
1. BOOM SWING 2. BOOM EXTENSION 3. DIVERGENCE 4. FEED EXTENSION 5. FEED SWING (MAIN) 6. BOOM LIFT 7. FEED SWING (SLAVE) 8. FEED TILT 9. FEED ROLLOVER
DESCRIPTION:
The X-Y coordinated boom movements together with 360 actuator roll-over make the use of the boom simple and logical. Accurate automatic parallel holding both in vertical and horizontal plane improves the drilling performance and accuracy. Large dimensioned rectangular profile, adjustable and sealed boom extension wear-pieces, large diameter bearings, sealed main joints, expanding pins in cylinder joints and use of super strong cast pieces in most stressed areas are some of the features that are included to the boom design for improve reliability.
KEY FEATURES:
INNOVATIVE DESIGN COMPACT AND POWERFULL EASY TO HANDLE TRAMMING PERFORMANCES LARGE BOOM COVERAGE THC DRILLING SYSTEM OPERATORS FRIENDLY ENVIRONMENT EASY MAINTENANCE
2100 1980 1550 250 1350 11180 with CC 2512 Feed 1400 6250 2550 320
1750
POWERFULL
45 kW electro-hydraulic power pack IP 55 protection class 1000 V system available 80 m capacity electric cable reel
EASY TO HANDLE:
Increased Stability
R1 R2
Optimized design of controls. Steering wheel and pedals for tramming up to 12 kph. Roomy operator s station. Tramming and drilling from a comfortable seated position.
EASY MAINTENANCE
Carrier Easy access to all service points. Rock Drill Modules can be changed and serviced on feed beam. Visual wear indicators THC Simple and quick diagnostics. Boom Wearing pieces can be changed without dismantling the boom. Clearance can be adjusted by conical cylinder pins.
PERCUSSION
DRILLING ROTATION
Hose pipe: RETURN LINE Percussion PRESSURE Lubrication: (air + oil) mixture LINE ROTATION OIL (Servonium 100) RETURN Rotation LINE Water hose: Connected to drill rod. Tank return: extra oil return to the main oil storage tank.
Single Boom: Hydraulically operated for its 3600 rotation. Main Boom: Boom extension Feed Boom: To feed forward or backward Roll Over Cylinder: To rotate the feed boom Feed Tilt: Cylinder-piston Boom Swing: Cylinder-piston ( Boom Lift: Cylinder-piston ( ) )
Jack Cylinder: Reduce load over wheel while drilling and provide stability with flexibility Electric motor: Main motor requires power supply 440 V. Pump (hydraulic tank) for suction and send to various different parts. Compressor: air + oil (receiver cylinder) Water pump Canopy: over driver seat (driver seat rotatory).
GENERAL DIMENSIONS
ROCK DRILL
Model HL Standard male shank Weight Impact frequency Percussion pressure Impact power
BOOM Model Type Weight (with hoses) Feed roll-over Boom extension Feed extension B 26 F Parallel holding 1 900 kg 360 1 200 mm 1 600 mm
FEED
Model Drill steel TF 500 H 32 - H 35
TF 500
500x10
Total length (mm) 4660 Drill steel length (mm) 3090 Hole depth (mm) 2830 Net weight (kg) 470 Feed force, max. (kN) 25
FEED ALTERNATIVE
Model Type Steel length Drill steel TTF 500 Telescopic 6/10 to 12/16 ft H 32 - H 35
TRAMMING DIMENSIONS
CARRIER
Model Diesel engine - Exhaust Automotive hydrostatic transmission Transfer case Axles, Front & Rear - Oscillation - Tyres Steering Brakes - Service - Emergency & parking Stabilizers Safety canopy - Lowering capability Fuel tank Hydraulic tank CB 05 Deutz BF4L 2011, 55 kW (74hp) Catalyser Drop gear Clark-Hurth Case New Holland D45 Rear axle, 2 x 6 12.00 x 20 Frame steering, 2 x 37 Hydrostatic transmission Hydraulic oil immersed multiple disc brakes on both axles 2 hydraulic jacks, front 2 hydraulic jacks, rear Hydraulic, FOPS-ROPS 920 mm 80 litre 145 + 50 litre
WATER CIRCUIT
Water booster pump - Capacity - Electric motor Oil cooler - Cooling capacity W.B.P. 2, centrifugal 4000 l/h at 15 bar 4 kW (5.5 hp) OW 30, water-actuated counter flow 30 kW
AIR CIRCUIT
Compressor - Capacity Electric motor C.T. 10, screw type 1.0 m at 7 bar 7.5 kW (10 hp)
ELECTRICAL SYSTEM
Total installed power 63 kW High / Low voltage Separate cabinets Voltage Standard 380 - 660 V Alternative 1 000 V Frequency 50 or 60 Hz Starting method Star / Delta Cable reel CRC type (Technical specification 5-503 S) - Capacity 100 m of cable 32 mm O.D Lighting - Working lights 2 x 150 W, 24 V - Tramming lights 4 x 70 W, 24 V (the 2 front lights are also used as working lights)
OPTIONAL EQUIPMENT
DRILLING SYSTEM
Drill angle measuring instrument TMS D2. Air flushing. *) Double flushing (air/water) with CT 10 compressor. Air mist flushing kit for auxiliary water/air connection. *) Front clamping head on drill feed. BRAKES Additional service brake on axles. Hand pump for manual brake release.
SAFETY EQUIPMENTS
1. CANOPY 2. FIRE EXTINGUISHER 3. HORN, BEACON AND REVERSE ALARM 4. CENTRAL LUBRICATION SYSTEM 5. TRAMMING AND WORKING LIGHTS 6. BRAKE LIGHTS 7. SPIRIT LEVEL 8. ROCK DRILL LUBRICATION WARNING KIT