Академический Документы
Профессиональный Документы
Культура Документы
TC - Photovoltaic - Screen - EN (1) 2019 PDF
TC - Photovoltaic - Screen - EN (1) 2019 PDF
Cold-resistant Temperature-resistant
Corrosion-resistant UV-resistant
Maximum vibration
Waterproof
protection
Variety of approval
Mechanical resistance
certifications
Assembly time
ÖLFLEX®
������������������������������������������������������������������� Anschluss- und Steuerleitungen ��������������� 10
UNITRONIC®
��������������������� Datenübertragungssysteme ����������������������������� 18
EPIC®
������������������������������������������������������������������� Industriesteckverbinder ����������������������������������������� 20
SKINTOP®
��������������������� Kabelverschraubungen ��������������������������������������������� 24
SILVYN®
������������������������������������������������������������������� Kabelschutz- und Führungssysteme ����� 29
FLEXIMARK®
��������������������� Kennzeichnungssysteme ��������������������������������������� 32
WERKZEUGE
������������������������������������������������������������������� und Kabelzubehör ��������������������������������������������������������������� 34
1
Andreas Lapp,
Matthias Lapp,
Ursula Ida Lapp,
Alexander Lapp,
Siegbert Lapp.
2
family [familie]
> www.lappkabel.de/unternehmen
3
range [komplettprogramm
für photovoltaik]
„Nichts ist umweltschonender, als Energie dukte bis zur Beratung bei der Planung In Zusammenarbeit mit Anwendern, dem
direkt von der Sonne zu bekommen. Das und Umsetzung reicht das Spektrum unse- TÜV und dem nordamerikanischen UL-Ap-
ist unser Bekenntnis zur Solartechnolo- rer Erfahrungen und Angebote für Sie. Un- probationsinstitut wurden eine Vielzahl
gie“, so Technik-Vorstand Siegbert Lapp. ter Beachtung sämtlicher Einsatzanforde- von Prüfungen mit unseren ÖLFLEX® Lei-
rungen bietet LAPP ein speziell auf tungen, SOLAR Leitungen, SKINTOP® Ka-
Es gehört zur innovativen Tradition von Photovoltaik
anlagen abgestimmtes Pro- belverschraubungen und EPIC® SOLAR
LAPP, dass wir schon früh das Potenzial duktprogramm aus Leitungen, Steckern Steckverbindern durchgeführt, wodurch
dieses Marktes erkannt und Spezialkom- und Zubehör zur kompletten Verkabelung höchster Qualitätsstandard gewährleistet
petenz dafür aufgebaut haben. Von der von Photovoltaikanlagen – ist. Unsere Produkte sind weltweit einsetz-
Entwicklung der bedarfsgerechten Pro- Wir sind System! bar und natürlich RoHS konform.
4
solar [anschlusstechnik von
LAPP für solarbäume]
Auf der Expo in Mailand waren die energie- immer wieder mit intelligenten Neuerun- Kapillareffekte und damit Schäden durch
erzeugenden Solarbäume der Blickfang im gen vo gebracht, darunter beispiels-
ran Korrosion werden so vermieden. Zudem
Deutschen Pavillon. Sie integrieren Organi- weise das bekannte Steckverbindungs- sind die Anschlusskomponenten mit nur
sche Photovol taik (OPV)-Technologie und system EPIC® SOLAR oder die Kabelserie knapp 30 mm x 20 mm deutlich kleiner als
bestehen im Gegensatz zu herkömmlichen ÖLFLEX® SOLAR. bei herkömmlichen Systemen. Auch die
Solarmodulen aus flexiblen folienintegrier- Leitungen für den Einsatz der Module wur-
ten OPV-Modulen. Die revolutionäre Ver- Die OPV-Module samt der innovativen An- den nach den kundenspezifischen Anfor-
bindungstechnik dafür kommt von LAPP schlüsse sind aus einem Guss: Es gibt kei- derungen ausgewählt und sind nur 2 mm
Stuttgart. ne aufgeklebte Anschlussdose wie bei her- breit. Für den Einsatz im Deutschen Pavil-
kömmlichen Photovoltaikmodulen mehr, lon wurden sie in grauer Farbe hergestellt,
LAPP entwickelt bereits seit über 10 sondern einen so genannten Access Point, damit sie sich im gleichfarbigen Drahtge-
Jahren erfolgreich Anschlusssysteme für der direkt auf die flexible OPV-Folie aufge- flecht der Designelemente nahezu un-
Photovoltaikmodule und hat den Markt gossen wird und mit der Folie verschmilzt. sichtbar integrieren lassen.
5
solar system [von LAPP]
Wechselrichter
Transformator 25.11.2010
Lappgroup
11
2 8
6
3
10
Solargenerator
Anschlusskasten
5
4
1
7
9 11
7
1
6
1 ÖLFLEX® SOLAR 5 UNITRONIC® Feldbus 9 SKINTOP® SOLAR
Photovoltaik Leitungen S/A Verkabelung Photovoltaik Kabelverschraubungen
2 PVC-ERDKABEL 6 ETHERLINE® 10 SILVYN®
Energie- und Steuerkabel Ethernet Verkabelung Kabelschutz- und Führungssysteme
3 Mittelspannungskabel 7 EPIC® SOLAR 11 FLEXIMARK®
Photovoltaik Steckverbinder Kabelkennzeichnungssysteme
4 UNITRONIC® BUS
Daten- und BUS Leitungen 8 SKINTOP® ST-M/CLICK
Kabelverschraubungen
Solarbaum
7
8 brands [kompromisslose qualität – weltweit]
ÖLFLEX® ist zum Synonym für Die hochwertigen UNITRONIC® Mit Produkten der Marke Mit den HITRONIC® Lichtwellen-
Anschluss- und Steuerleitun- Daten leitungen und Feldbus- ETHERLINE® sicher, schnell leitern wird die Übertragung großer
gen geworden. Die flexiblen komponenten bieten für alle und zuverlässig in die Zukunft Datenmengen zum Kinderspiel:
und ölbeständigen Leitungen Anwendungen im Maschinen- der Ethernet-Applikationen wie störungsfrei, abhörgeschützt und
erfüllen höchste Ansprüche und Anlagenbau die zukunfts- z. B. PROFINET®. Die Systeme nahezu mit Lichtgeschwindigkeit.
und halten selbst widrigsten weisende Lösung. Von der aus strapazierfähigen und robus- Selbst elektromagnetische Strah-
Bedingungen stand. Übertragung einfacher Steuer- ten Leitungen und Anschluss- lungen beeinträchtigen die Über-
signale bis hin zu Feldbus komponenten für die passive tragung nicht. Das HITRONIC®
signalen in komplexen Netz- und aktive Netzwerk technik Programm bietet die richtige Lö-
werkstrukturen – wir haben für bieten für nahezu jeden Ein- sung für den Innen- oder Außen
nahezu jeden Einsatz eine ver- satz, insbesondere im industri bereich, für anspruchsvolle Bedin-
lässliche Verkabelungs- und ellen Umfeld, eine geeignete gungen und sogar für den Einsatz
Anschlusslösung. Lösung. in der Energieführungskette.
EPIC® Industriesteckverbinder Kabel einführen, zudrehen, Das universelle Programm der Die Anforderung: eine dauer-
sind überall dort im Maschi- fertig. Mit einem Handgriff sor- SILVYN® Schutz- und Führungs- hafte Beschriftung. Die Lösung:
nen- und Anlagenbau oder in gen unsere SKINTOP® Kabel- systeme schützt Kabel und FLEXIMARK®. Mit diesen durch-
der Antriebstechnik, wo ge- verschraubungen für sichere Leitungen perfekt vor Staub, dachten Systemen ist ein
messen, gesteuert, geregelt Verbindungen. Die universellen Nässe, mechanischen, thermi- schneller Überblick im Schalt-
und angetrieben wird. EPIC® Systeme sind einfach und schen oder chemischen Einwir- schrank keine Wunschvorstel-
ist ein flexibles System aus effektiv: Sie fixieren und zent- kungen. Mit SILVYN® CHAIN, lung mehr. Von der einfachen
Gehäusen, Einsätzen und Kon- rieren das Kabel, dichten es dem vielfältigen Programm an Beschriftungsfläche für manu-
takten: extrem robust, absolut hermetisch ab und garantieren Energieführungsketten, bieten elle Markierungen bis hin zur
sicher und kinderleicht konfek- eine optimale Zugentlastung. wir auch Kabelschutz und -füh- elektronischen Kennzeichnung.
tionierbar. rung für dynamische Anwen- Das FLEXIMARK® Programm
dungen. garantiert Dauerhaftigkeit.
8
Zuverlässig die Welt verbinden
Wir wollen Ihnen helfen, noch produktiver schaften, Partnern und vor allem unseren dukten und Kabelzubehör. Dank dieser
und erfolgreicher zu werden. Deswegen kompetenten Beratungsteams bieten wir Kompetenz können wir garantieren, dass
arbeiten wir ständig daran, unsere Prozes- Ihnen umfassenden Service auf allen Kon- Sie bei LAPP die Qualität bekommen, die
se zu optimieren. Wir tun alles dafür, für tinenten. Dass wir Kabeltechnologie nicht Sie brauchen und die Sie erwarten.
Sie immer die beste Lösung zu finden und nur vertreiben, sondern unsere Produkte
Sie damit schnell, effizient und effektiv zu auch selbst fertigen, ist auch für Sie von
unterstützen. Vorteil: Als Hersteller mit 17 eigenen Pro-
Auf Qualität von LAPP können
duktionsstätten profitieren Sie von unserer Sie sich verlassen – überall auf
Wo auch immer Sie sind – wir sind bei Ih- Kompetenz in Entwicklung, Konstruktion der Welt. Dafür stehen auch
nen. Mit unseren Werken, Vertriebsgesell- und Herstellung von Kabeln, Systempro- unsere starken Marken.
152
Produktions--
standorte
8 Starke
Marken
Innovation
Nationen
40
nach der
Mehr als anderen
3.770
gesellschaften
Mitarbeiter
9
Power and control cables
Special applications • Photovoltaic
ÖLFLEX®
Info
ÖLFLEX®
H1Z2Z2-K
UNITRONIC®
Cross-linked solar cables - type H1Z2Z2-K, certified according to EN 50618
Info
ETHERLINE®
ÖLFLEX® SOLAR XLR-R
HITRONIC®
• Robust against mechanical impacts ETIM 5.0/6.0 Class-ID: EC001578
Product Make-up ETIM 5.0/6.0 Class-Description:
• For outdoor applications
Flexible cable
• Not suitable for direct burial, installation • Fine-wire, tinned-copper conductor
according to IEC 60364-5-52, respectively • Coreinsulation made of cross-linked
Conductor stranding
HD 60364-5-52 copolymer Fine wire according to VDE 0295,
class 5/IEC 60228, class 5
• Colour of core insulation: white
Application range • Outer sheath made of cross-linked
Minimum bending radius
• For use in photovoltaic-systems with rated copolymer Fixed installation:
voltage 1500 V DC 4 × outer diameter
• Outer sheath colour: black, red or blue
• For the cabling between the solar modules Nominal voltage
EPIC®
and as extension cable between the AC U0/U : 1.0/1.0 kV
module strings and the DC/AC inverter DC U0/U : 1.5/1.5 kV
• Flexible or building-integrated PV systems Max. permissible operating voltage:
DC 1.8 kV
Product features Test voltage
• Flame retardant acc. to IEC 60332-1-2 AC 6500 V
• Weather/UV-resistant acc. to EN 50618, Current rating
SKINTOP®
appendix E Im compliance with EN 50618,
• Ozone-resistant according to EN 50396 Table A.3
• Good notch and abrasion resistance Temperature range
• Halogen-free according to IEC 60754-1 -40°C to +120°C max. conductor
(amount of halogen acid gas) temperature based on EN 60216-1
Corrosiveness of combustion gases acc. Ambient temperature range according
to IEC 60754-2 (degree of acidity) to EN 50618: -40°C to +90°C
SILVYN®
Conductor cross-section Outer diameter Copper index Weight
Article number (mm²) (mm) (kg/km) (kg/km)
H1Z2Z2-K
Core insulation: white / Outer sheath: black
1023552 4 5.8 38.4 62
1023553 6 6.3 57.6 84
1023554 10 7.4 96 126
1023555 16 8.1 153.6 197
FLEXIMARK®
Electron beam cross-linked solar cables with optimized performance in water – EN 50618 type
Info
• Substitudes previous
ÖLFLEX® SOLAR XLR WP
flooding or in buried conduits • Ozone-resistant according to EN 50396 ETIM 5.0/6.0 Class-ID: EC001578
• Reduction of flame propagation and of ETIM 5.0/6.0 Class-Description:
• Halogen-free and flame-retardant
toxic combustion gases in the event of fire Flexible cable
• Good notch and abrasion resistance
• Robust against mechanical impacts Conductor stranding
• XLWP = X-Linked Water-Proof Fine wire according to VDE 0295,
• Extruded colour stripe serves as reverse Proven electron beam cross-linked quality
polarity protection during installation. class 5/IEC 60228, class 5
• Exact quantity control during installation Norm references / Approvals Minimum bending radius
by meter marking on the cable sheath • H1Z2Z2-K (type according to EN 50618)
Fixed installation:
4 × outer diameter
• Items with other cross-sections on request
Application range Nominal voltage
EPIC®
• Suitable for direct burial: see data sheet Im compliance with EN 50618,
• Outer sheath colour: black respectively
black with red stripe Table A.3
Temperature range
-40°C to +120°C max. conductor
temperature based on EN 60216-1
Ambient temperature range according
to EN 50618: -40°C to +90°C
SILVYN®
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
APPENDIX
ÖLFLEX®
ÖLFLEX® SOLAR V4A
UNITRONIC®
Extra robust solar cables with high-grade steel protection braiding
Info
ETHERLINE®
Benefits Product features Technical data
• High-grade stainless steel wire braiding • Weather/UV-resistant acc. to HD 605/A1
(class V4A) provides highly effective • Halogen-free and flame-retardant Core identification code
HITRONIC®
protection against martens, rodents and Black
• Good mechanical strength
even termites Conductor stranding
• Robust against mechanical impacts Product Make-up Fine wire according to VDE 0295,
• Reduction of flame propagation and of • Fine-wire, tinned-copper conductor class 5/IEC 60228, class 5
toxic combustion gases in the event of fire • Core insulation made of electron beam Minimum bending radius
cross-linked copolymer Fixed installation:
Application range • Outer sheath made of electron beam 5 × outer diameter
• For use in PV systems that are installed cross-linked copolymer Nominal voltage
on the roofs of stables or barns situated in AC U0/U : 600/1000 V
• Outer sheath colour: Black
farmsteads or densely-forested areas DC U0/U : 900/1500 V
• Armouring made of stainless V4A
EPIC®
high-grade steel wire braiding Max. permissible operating voltage:
DC 1.8 kV (Conductor-conductor,
non earthed system)
Test voltage
AC 6500 V
Temperature range
Fixed installation: -40°C to +100°C
SKINTOP®
max. conductor temperature
SILVYN®
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: Coil 100 m; Drum (500; 1000) m
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
FLEXIMARK®
ACCESSORIES
APPENDIX
NYY-J, NYY-O
UNITRONIC®
Fixed installation, direct burial; PVC cable with different application areas
Info
• For indoor and outdoor use to VDE 0298-4, and VDE 0298-4 ETIM 5.0/6.0 Class-ID: EC000057
(also refer to the catalogue appendix T12) ETIM 5.0/6.0 Class-Description:
• Burial without additional, suitable underground
for installation in and on buildings Low voltage power cable
protection according to VDE standard
HD 603/VDE 0276-603 – Part 3-G (point 4) Core identification code
Norm references / Approvals Up to 5 cores: colour-coded according
governing PVC cables for direct burial:
normal minimum installation depth 0.6 m, • HD 603/VDE 0276-603 (for 1 to 5 cores) to VDE 0293-308, refer to Appendix T9
but at least 0.8 m under roads • HD 627/VDE 0276-627 (as from 7 cores) From 6 cores: black with white numbers
• In concrete with a temperature below the Conductor stranding
maximum cable operating temperature Product Make-up Single or multi-wire
of +70 °C according to the VDE standard • Bare copper wire conductor
Minimum bending radius
HD 603/VDE 0276-603 - Part 3-G (point 4) • Abbreviations “re”, “rm”, “se”, “sm”:
EPIC®
NYY-J
1550030 1 × 25 rm 13 240 380
1550038 1 × 35 rm 14 336 447
1550032 1 × 50 rm 15 480 650
1550033 1 × 70 rm 17 672 864
1550035 1 × 120 rm 21 1152 1400
1550037 1 × 185 rm 25 1776 2080
15500013 3 × 1.5 re 12 43 223
FLEXIMARK®
ÖLFLEX®
Number of cores and mm² Outer diameter Copper index Weight
Article number per conductor (mm) (kg/km) (kg/km)
15500213 4 × 6 re 17 230 547
15500273 5 × 6 re 19 288 640
15500603 3 × 10 re 18 288 629
UNITRONIC®
15500223 4 × 10 re 19 384 743
15500823 5 × 10 re 21 480 899
15500613 3 × 16 re 20 461 850
15500233 4 × 16 re 22 614 1039
15500833 5 × 16 re 23 768 1240
15500713 3 × 25 rm/16 re 25 874 1595
15500243 4 × 25 rm 27 960 1620
15500153 3 × 35 sm/16 re 27 1162 1718
15500753 4 × 35 sm 27 1344 1916
15500163 3 × 50 sm/25 rm 31 1680 2383
ETHERLINE®
15500253 4 × 50 sm 31 1920 2639
15500173 3 × 70 sm/35 sm 33 2352 3196
15500763 4 × 70 sm 35 2688 3576
15500183 3 × 95 sm/50 sm 38 3216 4271
15500773 4 × 95 sm 40 3648 4746
15500723 3 × 120 sm/70 sm 41 4128 5281
15500783 4 × 120 sm 43 4608 5813
15500733 3 × 150 sm/70 sm 46 4992 6408
15500793 4 × 150 sm 48 5760 7263
15500743 3 × 185 sm/95 sm 50 6240 7909
HITRONIC®
15500803 4 × 185 sm 53 7104 8905
15500193 3 × 240 sm/120 sm 57 8064 10162
15500813 4 × 240 sm 60 9216 11430
NYY-O
1550205 1 × 10 re 10 96 176
1550206 1 × 16 re 11 154 239
1550207 1 × 25 rm 13 240 380
1550208 1 × 35 rm 14 336 447
1550209 1 × 50 rm 15 480 650
1550210 1 × 70 rm 17 672 864
1550211 1 × 95 rm 19 912 1132
1550212 1 × 120 rm 21 1152 1405
EPIC®
1550213 1 × 150 rm 22 1440 1710
1550214 1 × 185 rm 25 1776 2080
1550215 1 × 240 rm 27 2304 2669
1550216 1 × 300 rm 30 2880 3305
1550218 1 × 500 rm 39 4800 5400
15502003 2 × 1.5 re 11 29 210
15502193 2 × 2.5 re 12 48 250
15502203 2 × 4 re 14 77 360
SKINTOP®
15502213 2 × 6 re 15 115 400
15502223 2 × 10 re 17 192 500
15502533 4 × 16 re 22 614 1039
15502543 4 × 25 rm 27 960 1620
15502563 4 × 50 sm 31 1920 2639
15502573 4 × 70 sm 35 2688 3576
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
Copper price basis: excluding copper. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
SILVYN®
Please specify the preferred type of packaging (e.g. 1 × 500 m drum or 5 × 100 m coils).
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
FLEXIMARK®
ACCESSORIES
APPENDIX
NAYY-J, NAYY-O
UNITRONIC®
Fixed installation, direct burial; PVC cable with solid aluminium conductors
Info
• For indoor and outdoor use HD 603/VDE 0276-603, Part 3-G, point 5) ETIM 5.0/6.0 Class-ID: EC000057
for routing underground and Table 15 (in ETIM 5.0/6.0 Class-Description:
• Burial without additional, suitable
the air at an air temperature of +30 °C Low voltage power cable
underground protection according to VDE
according to HD 603/VDE 0276-603, Core identification code
standard HD 603/VDE 0276-603 - Part 3-G
Part 3-G, point 5) when used outdoors; According to VDE 0293-308 (table T9)
(point 4) governing PVC cables for direct
but always taking into consideration
burial: normal minimum installation depth Conductor stranding
corrections/reductions to the current
0.6 m, but at least 0.8 m under roads Single or multi-wire
rating that may be necessary according
• In concrete with a temperature below the to VDE 0298-4, and VDE 0298-4 Minimum bending radius
maximum cable operating temperature (also refer to the catalogue appendix T12) Fixed installation: 12 × outer diameter
of +70 °C according to the VDE standard for installation in and on buildings
HD 603/VDE 0276-603 - Part 3-G (point 4) Nominal voltage
EPIC®
NAYY-O
3036547 1 × 70 rm 18 203 410
3036548 1 × 95 rm 20 276 570
3036549 1 × 120 rm 21 348 620
3036550 1 × 150 rm 23 435 735
3036551 1 × 185 rm 25 536 845
3036552 1 × 240 rm 28 696 1100
1552022 1 × 300 rm 30 870 1379
FLEXIMARK®
NAYY-J
1552010 4 × 35 re 29 406 1170
1552011 4 × 50 se 30 580 1305
1552012 4 × 70 se 35 812 1730
1552013 4 × 95 se 39 1102 2205
1552014 4 × 120 se 42 1392 2655
1552015 4 × 150 se 46 1740 3150
1552016 4 × 185 se 51 2146 3925
1552017 4 × 240 se 60 2784 4880
ACCESSORIES
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
Aluminium price basis: excludes aluminium. Refer to catalogue appendix T17 for the application and definition of “Metal price basis” and “Metal index”.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
APPENDIX
ÖLFLEX®
NYCWY
UNITRONIC®
Fixed installation, direct burial; PVC cable with concentric, wave-like copper conductor and cross-conductive spiral
Info
ETHERLINE®
Benefits according to HD 603/VDE 0276-603, Technical data
• Concentric conductor above all as PE Part 3-G, point 5) when used outdoors;
• Easier connection due to the waveform of but always taking into consideration Classification ETIM 5/6
HITRONIC®
the concentric copper conductor corrections/reductions to the current ETIM 5.0/6.0 Class-ID: EC000057
rating that may be necessary according ETIM 5.0/6.0 Class-Description:
Application range to VDE 0298-4, and VDE 0298-4 (also Low voltage power cable
refer to the catalogue appendix T12) for Core identification code
• Power and control cable for fixed
installation in and on buildings Up to 5 cores: colour-coded according
installation in the following applications:
• For indoor and outdoor use
to VDE 0293-308, refer to Appendix T9
Norm references / Approvals
• Burial without additional, suitable Conductor stranding
• HD 603/VDE 0276-603 for NYCWY with Single or multi-wire
underground protection according to VDE 3 or 4 cores and the relevant concentric
standard HD 603/VDE 0276-603 - Part 3-G protective conductor Minimum bending radius
(point 4) governing PVC cables for direct Fixed installation: 12 × outer diameter
EPIC®
burial: normal minimum installation depth Product Make-up Nominal voltage
0.6 m, but at least 0.8 m under roads • Bare copper wire conductor U0/U: 0.6/1.0 kV
• In concrete with a temperature below the
• Abbreviations “re”, “rm”, “se”, “sm”: Test voltage
maximum cable operating temperature
r = round conductor form; 4000 V
of +70 °C according to the VDE standard
s = sectorial conductor form;
HD 603/VDE 0276-603 - Part 3-G (point 4) Temperature range
e = single-wire conductor;
governing PVC cables for direct burial During installation: -5°C to +50°C
m = multi-wire conductor;
SKINTOP®
Fixed installation: -40°C to +70°C
Product features • Core insulation: Based on PVC
• Flame-retardant according IEC 60332-1-2 • Filling compound over the core assembly
• Current rating according to HD 603/VDE • Concentric, wave-like, outer conductor
0276-603, Part 3-G, Table 14 (buried at made of bare copper strands with
+20 °C ground temperature according to inductance-reducing, cross-conductive
HD 603/VDE 0276-603, Part 3-G, point 5) copper bond counter spiral
for routing underground and Table 15 (in • Outer sheath: Based on PVC
the air at an air temperature of +30 °C
SILVYN®
Number of cores and mm² Outer diameter Copper index Weight
Article number per conductor (mm) (kg/km) (kg/km)
NYCWY
15505003 2 × 10 re/10 19 312 610
15505263 3 × 10 re/10 20 408 775
15505403 4 × 10 re/10 21 504 897
15505273 3 × 16 re/16 22 643 1066
15505413 4 × 16 re/16 24 796 1250
FLEXIMARK®
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
Screened data transmission cable mit PE core insulation, reinforced outer sheath and twisted pairs
Info
Application range sheath may turn out to be advantageous Core identification code
• Particularly suitable for wiring data DIN 47100, refer to Appendix T9
Product features
systems with transmission rates up to 10 Mutual capacitance
Megabits per second, and is qualified for • Flame-retardant according IEC 60332-1-2
At 800 Hz: max. 60 nF/km
the RS422 and RS485 interfaces. Inductivity
Norm references / Approvals
• For fixed and limited flexible installation approx. 0.65 mH/km
• Based on VDE 0812
• Can be used in dry or damp rooms
Conductor stranding
• Signal-, control- and measuring cable,for Product Make-up Stranded conductor,
transmission of low, sensitive signals and • 7-wire bare stranded copper conductor based on VDE 0881, 7-wire
high bit rates
• Core insulation made of polyethylene (PE) Minimum bending radius
EPIC®
Core/core: 2000 V
Core/screen: 1000 V
Characteristic impedance
100 ± 15 Ohm (> 1 MHz)
Temperature range
Occasional flexing: -5°C to +70°C
Fixed installation: -40°C to +80°C
SILVYN®
ÖLFLEX®
UNITRONIC® ST
UNITRONIC®
Static screened data transmission cable similar to UL AWM 2092
ETHERLINE®
Benefits Product features Technical data
• Aluminium-laminated plastic foil static • Protection against interferences at
screen with tin-plated drain wire minimises medium and high frequencies by Classification ETIM 5/6
the interference of high frequency, aluminium-laminated plastic foil, ETIM 5.0/6.0 Class-ID: EC000104
electromagnetic fields combination of flexibility and good ETIM 5.0/6.0 Class-Description:
screening (normal requirements) Control cable
HITRONIC®
Application range • Flame-retardant according IEC 60332-1-2 Core identification code
• Especially designed for the transmission 2 cores: black, transparent
of the smallest measurement and control Norm references / Approvals 3 cores: black, red, transparent
signals at minimal space requirements • Based on UL AWM Style 2092 / 2093 Mutual capacitance
• Internal wiring of electronic equipment C/C approx. 90 nF/km
• For fixed and limited flexible installation Product Make-up C/S approx. 160 nF/km
• For use in dry, damp and wet rooms • 7-wire tinned stranded copper conductor Inductivity
• Core insulation made of polyethylene (PE) approx. 0.65 mH/km
• Plastic-laminated aluminium foil with Minimum bending radius
tinned copper drain wire Occasional flexing: 10 × outer diameter
EPIC®
• Outer sheath made of PVC, Colour of the Fixed installation: 6 × outer diameter
outer sheath: Similar to Silver-grey/RAL 7001 Characteristic impedance
Approx. 95 Ohm
Temperature range
Occasional flexing: -5°C to +70°C
Fixed installation: -40°C to +80°C
SKINTOP®
Number of conductors Conductor cross- Core insulation Outer sheath Outer diameter Copper index
Article number and AWG size section (mm²) material material (mm) (kg/km)
UNITRONIC ST ®
SILVYN®
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
FLEXIMARK®
ACCESSORIES
APPENDIX
Info
Info
HITRONIC®
44428219 EPIC® SOLAR 4Plus PIN M 4 mm2 ... 6 mm2 4–6 — — 100
44428239 EPIC® SOLAR 4Plus PIN M 10 mm2 10 — — 100
EPIC® SOLAR 4Plus female field-mountable, inclusive contacts
44428234 EPIC® SOLAR 4Plus F 2.5 mm2 2.5 5.2 – 7.1 22 100
44428236 EPIC® SOLAR 4Plus F 4 mm2 ... 6 mm2 4–6 5.2 – 7.1 30 100
44428238 EPIC® SOLAR 4Plus F 10 mm2 10 5.2 – 7.1 35 100
EPIC® SOLAR 4Plus female contacts as spare part
44428218 EPIC® SOLAR 4Plus PIN F 2.5 mm2 2.5 — — 100
44428220 EPIC® SOLAR 4Plus PIN F 4 mm2 ... 6 mm2 4–6 — — 100
44428240 EPIC® SOLAR 4Plus PIN F 10 mm2 10 — — 100
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
APPENDIX
ÖLFLEX®
EPIC® SOLAR 4 Splitter
UNITRONIC®
Connector system for weatherproof cabling of photovoltaic systems
Info
ETHERLINE®
Benefits Technical data
• Splitter for pallalel connection of
PV-modules and strings Classification ETIM 5/6 Pollution degree
HITRONIC®
• Easy plug and play ETIM 5.0/6.0 Class-ID: EC002635 3
ETIM 5.0/6.0 Class-Description: Protection rating
• Fixing option for a clear installation
Circular connector (industrial IP65/IP67
with a ∅ 5mm mounting hole connector)
Cycle of mechanical operation
Application range Rated voltage (V) 100
1000 V AC/DC
• Photovoltaic plants Protection class
• Crystalline and thin-film constructions Rated impulse voltage II
8 kV
• Solartracker Temperature range
Rated current (A) -40 °C ... +85 °C
Product features 30 A
EPIC®
• Mateable with EPIC® SOLAR 4PLUS,
EPIC® SOLAR 4
• Splitter MFF 1 × connection male,
2 × connection female
• Splitter MFF 1 × connection female,
2 × connection male
SKINTOP®
Suitable connectors
• EPIC® SOLAR 4
• EPIC® SOLAR 4Plus
SILVYN®
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
FLEXIMARK®
ACCESSORIES
APPENDIX
EPIC® CRIMPTOOL
UNITRONIC®
ETHERLINE®
ÖLFLEX®
EPIC® SOLAR TOOL CSC
UNITRONIC®
Cutting, stripping and crimping with just one tool
Info
ETHERLINE®
EPIC® SOLAR TOOL
3 cross section in one tool
Info
HITRONIC®
• 3 cross section in one tool
EPIC®
EPIC® SOLAR TOOL CSC EPIC® SOLAR TOOL CSC
• H1Z2Z2-K
Classification ETIM 5/6
• For crimping of the photovoltaic connector ETIM 5.0/6.0 Class-ID: EC000168
EPIC® SOLAR 4 in the field • ÖLFLEX® SOLAR XLWP ETIM 5.0/6.0 Class-Description:
• For EPIC® SOLAR 4 and MC4 suitable • ÖLFLEX® SOLAR XLS-R Crimp tool cable lugs, cable end
EPIC® SOLAR TOOL • ÖLFLEX® SOLAR XLR-E sleeves, screen connection
• For crimping of the photovoltaic connector EPIC® SOLAR TOOL
EPIC® SOLAR 4 in the field • H1Z2Z2-K
SKINTOP®
• For EPIC® SOLAR 4 and MC4 suitable • ÖLFLEX® SOLAR XLWP
• ÖLFLEX® SOLAR XLS-R
Product features
• ÖLFLEX® SOLAR XLR-E
EPIC® SOLAR TOOL CSC
• Multifunctional die for cutting, stripping Suitable connectors
and crimping with just one tool
EPIC® SOLAR TOOL CSC
• Locator (LOC) for the safe and accurate
• EPIC® SOLAR 4
positioning of the crimping contacts
• EPIC® SOLAR 4 Plus
EPIC® SOLAR TOOL
SILVYN®
• Crimping die (DIE) for the cable cross
EPIC® SOLAR TOOL
sections of 2.5 mm² up to 10 mm² • EPIC® SOLAR 4
• Locator (LOC) for the safe and accurate • EPIC® SOLAR 4 Plus
positioning of the crimping contacts
Info
with minimum space requirements • SKINTOP® ST(R) M ISO versions with installation dimensions and torques
• Machine and equipment manufacturing extra-long connection thread, see table, Colour delivered
• Photovoltaic no DNV approval Silver grey (RAL 7001)
• Automation technology Light grey (RAL 7035)
Suitable cables Black (RAL 9005), UV-resistant
• Offshore platforms, equipment and SKINTOP® STR-M
shipyards • The following cables are recommended Material
SKINTOP® STR-M for IP 69 applications: Body: Polyamide
SKINTOP®
• With reducing seal insert, to seal cables ÖLFLEX® ROBUST 200 Seal: CR
with smaller outer diameters. H07RN8-F Tests
H07RN-F GGVS: TÜ.EGG.020-95
Norm references / Approvals Protection rating
• UL File Nr. E79903
Suitable tools
SKINTOP® ST-M IP 68 – 5 bar
• GGVS: TÜ.EGG.020-95 IP 69
• SKINMATIC® QUICK Set 1
• SKINMATIC® MH Set Temperature range
• SKINTOP® LOCATOR Fixed: -40°C to +100°C
Dynamic: -20°C to +100°C
SILVYN®
• SKINMATIC® RZ
ÖLFLEX®
Clamping range ∅F SW wrench size Overall length, C Thread length, D
Article number Article designation/size Pieces/PU
(mm) (mm) (mm) (mm)
SKINTOP ST M ISO silver-grey (with long metric connecting thread)
®
UNITRONIC®
53017040 M 25 × 1.5 ISO 9 – 14 27 47 13 50
SKINTOP® ST M ISO black (with long metric connecting thread)
53010000 M 12 × 1.5 ISO 3.5 – 7 15 36.7 15 100
53017210 M 16 × 1.5 ISO 3.5 – 8 19 40 12 100
53017230 M 20 × 1.5 ISO 5 – 12 24 45 13 100
53017240 M 25 × 1.5 ISO 9 – 14 27 47 13 50
SKINTOP STR-M silver grey
®
ETHERLINE®
53111130 M 25 × 1.5 5 – 13 30 40 10 50
53111140 M 32 × 1.5 6 – 15 36 47 10 25
53111150 M 40 × 1.5 9 – 23 46 52 10 10
53111160 M 50 × 1.5 24 – 29 55 62 12 5
53111170 M 63 × 1.5 28 – 39 66 71 12 5
SKINTOP® STR-M black
53111300 M 12 × 1.5 2 – 5 15 30 8 100
53111310 M 16 × 1.5 3.5 – 7 19 34 8 100
53111320 M 20 × 1.5 4 – 10 25 37 9 100
53111330 M 25 × 1.5 5 – 13 30 40 10 50
HITRONIC®
53111340 M 32 × 1.5 6 – 15 36 47 10 25
53111350 M 40 × 1.5 9 – 23 46 52 10 10
53111360 M 50 × 1.5 24 – 29 55 62 12 5
53111370 M 63 × 1.5 28 – 39 66 71 12 5
SKINTOP® STR-M light grey
53111500 M 12 × 1.5 2 – 5 15 30 8 100
53111510 M 16 × 1.5 3.5 – 7 19 34 8 100
53111520 M 20 × 1.5 4 – 10 25 37 9 100
53111530 M 25 × 1.5 5 – 13 30 40 10 50
53111540 M 32 × 1.5 6 – 15 36 47 10 25
53111550 M 40 × 1.5 9 – 23 46 52 10 10
53111560 M 50 × 1.5 24 – 29 55 62 12 5
EPIC®
53111570 M 63 × 1.5 28 – 39 66 71 12 5
SKINTOP® STR M ISO silver-grey (with long metric connecting thread)
53017110 M 16 × 1.5 ISO 2 – 6 19 40 12 100
53017130 M 20 × 1.5 ISO 4 – 9 24 45 13 100
53017140 M 25 × 1.5 ISO 6 – 12 27 47 13 50
SKINTOP® STR M ISO black (with long metric connecting thread)
53017310 M 16 × 1.5 ISO 2 – 6 19 40 12 100
53017330 M 20 × 1.5 ISO 4 – 9 24 45 13 100
SKINTOP®
53017340 M 25 × 1.5 ISO 6 – 12 27 47 13 50
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
SILVYN®
FLEXIMARK®
ACCESSORIES
APPENDIX
Info
ÖLFLEX®
SKINTOP® GMP-GL-M
UNITRONIC®
ETHERLINE®
Benefits Product Make-up Technical data
• Glass fibre-reinforced for maximum • Metric connection thread acc. to
mechanical stability DIN EN 60423 Classification ETIM 5/6
HITRONIC®
• Supporting surface for spanner means • Basis for technical information ETIM 5.0/6.0 Class-ID: EC000441
scratches on the housing are avoided DIN IEC 62444 ETIM 5.0/6.0 Class-Description:
Cable screw gland
Application range Note On request
• For locking SKINTOP® cable glands in • UL approval only when used with the Available without collar
boreholes without thread. UL-approved SKINTOP® polyamide cable (without surface for assembling tool)
glands Colour delivered
Norm references / Approvals • Designed for use with metric SKINTOP® Silver grey (RAL 7001)
• UL File Nr. E79903 plastic cable glands Light grey (RAL 7035)
Black (RAL 9005), UV-resistant
EPIC®
Material
Polyamide, glass fibre-reinforced
Temperature range
Fixed: -40°C to +100°C
Dynamic: -20°C to +100°C
SKINTOP®
SW wrench size
Article number Article designation/size Pieces/PU
(mm)
SKINTOP GMP-GL-M silver grey
®
SILVYN®
SKINTOP® GMP-GL-M black
53119100 M 12 × 1.5 17 100
53119110 M 16 × 1.5 22 100
53119120 M 20 × 1.5 27 100
53119130 M 25 × 1.5 34 100
53119140 M 32 × 1.5 41 100
53119150 M 40 × 1.5 50 25
FLEXIMARK®
53119160 M 50 × 1.5 60 25
53119170 M 63 × 1.5 75 25
SKINTOP® GMP-GL-M light grey
53119003 M 12 × 1.5 17 100
53119013 M 16 × 1.5 22 100
53119023 M 20 × 1.5 27 100
53119033 M 25 × 1.5 34 100
53119043 M 32 × 1.5 41 100
53119053 M 40 × 1.5 50 25
ACCESSORIES
53119063 M 50 × 1.5 60 25
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
APPENDIX
Article number Article designation/ Clamping range ∅F M SW1/SW2 Overall length, C Thread length, D Wall thickness, S Pieces/
size (mm) (hole in mm) (mm) (mm) (mm) (mm) PU
SKINTOP CLICK light grey
®
ÖLFLEX®
•
SILVYN® SPLIT
UNITRONIC®
Info
ETHERLINE®
Benefits Product features Technical data
• Dimensionally stable • Halogen-free (PA6)
• Flexible • Abrasion-resistant Classification ETIM 5/6
ETIM 5.0/6.0 Class-ID: EC001175
• Crush-resistant • High resistance to oil, petrol, acids and
ETIM 5.0/6.0 Class-Description:
• Low rodent-protection other chemicals Corrugated plastic hose
HITRONIC®
• Fast and easy assembly • Very good UV- and Weathering
performance (SILVYN® SPLIT PP UV) On request
Polyamide 12 version (highly flexible)
Application range ETFE version (high-temperature
• Vehicle construction Product Make-up
resistant up to +200°C)
• Shipbuilding • Divisable corrugated conduit
Colour delivered
• Mechanical engineering Black (RAL 9005), UV-resistant
• Electrical industry
Material
• Used in areas where cables and wires Polyamide 6 (PA6)
need to be protected after assembly Polypropylene (PP)
Protection rating
EPIC®
IP 43 with SILVYN® SPLIT COV
Temperature range
PA6 : -40°C to +120°C
PP : -40°C to +135°C
PP UV : -40°C to +105°C
SKINTOP®
Article number Nominal size ID × OD (mm) Bending radius (mm) Suitable for SILVYN® COV PU (m)
SILVYN® SPLIT PA6
61806621 6 6.3 × 10 15 — 50
61806620 10 8.8 × 13.5 15 M16/PG9 50
61806631 11 11 × 16.1 15 — 50
61806630 14 13.2 × 18.7 15 M20/PG13,5 50
61806641 16 16 × 21.5 20 — 50
61806640 20 20.2 × 25.7 25 M25/PG21 50
61806650 23 23.9 × 31.3 35 M32/PG29 50
61806651 29 27.3 × 35.5 35 — 50
SILVYN®
61806660 37 32.5 × 43.2 40 M40/PG29 25
61806670 45 43.1 × 54.2 70 M50 25
61806671 70 67 × 79.8 95 — 10
61806672 100 87.5 × 102.5 100 — 10
SILVYN® SPLIT PP
61806615 6 6.3 × 10 15 — 50
61806625 10 8.4 × 13.4 15 M16/PG9 50
61806616 11 11 × 16.1 15 — 50
FLEXIMARK®
SILVYN SPLIT PP UV
®
61806100 6 6.3 × 10 15 — 50
61806110 10 8.4 × 13.4 15 M16/PG9 50
61806120 11 11 × 16.1 15 — 50
61806130 14 12.5 × 18.5 15 M20/PG13,5 50
61806140 16 16 × 21.5 20 — 50
61806150 20 19.2 × 25.3 20 M25/PG21 50
61806160 23 23.4 × 30.8 45 M32/PG29 50
61806170 29 27.3 × 35.5 50 — 50
61806180 37 31 × 41.4 60 M40/PG29 25
61806190 45 42.7 × 54 75 M50 25
APPENDIX
• Electrical industry
• Used in areas where cables and wires
need to be protected after assembly
Article number Nominal size Metric size Hole ∅ (mm) Suitable for SILVYN® SPLIT Pieces/PU
SILVYN® SPLIT COV-M (counter nut not included)
61806680 — 16 x 1.5 — 10 100
61806681 — 20 x 1.5 — 14 100
61806682 — 25 x 1.5 — 20 50
SILVYN®
61806683 — 32 x 1.5 — 23 50
61806684 — 40 x 1.5 — 37 25
61806685 — 50 x 1.5 — 45 25
SILVYN SPLIT GMP-M (metric counter nut)
®
61806691 — 40 x 1.5 — — 25
61806692 — 50 x 1.5 — — 25
SILVYN® SPLIT COS
61806693 6 — M3 6 100
61806690 10 — M3 10 100
61806676 10 — M5 10 100
61806694 11 — M3 11 100
61806700 14 — M3 14 100
61806677 14 — M5 14 50
ACCESSORIES
61806695 16 — M5 16 50
61806696 16 — M6 16 50
61806710 20 — M5 20 50
61806678 20 — M6 20 50
61806720 23 — M5 23 50
61806679 23 — M6 23 50
61806697 29 — M5 29 50
61806698 29 — M6 29 50
61806730 37 — M6 37 20
61806740 45 — M6 45 20
61806699 70 — M6 70 10
APPENDIX
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
ÖLFLEX®
•
SILVYN® RILL PA 6
UNITRONIC®
Info
ETHERLINE®
Benefits Product features Technical data
• Dimensionally stable • Halogen and cadmium-free
• Flexible • Abrasion-resistant Classification ETIM 5/6
HITRONIC®
ETIM 5.0/6.0 Class-ID: EC001175
• High flame-retardance and self- • High resistance to oil, petrol, acids and
ETIM 5.0/6.0 Class-Description:
extinguishing in accordance with UL 94V-0 other chemicals Corrugated plastic hose
• Crush-resistant
Norm references / Approvals Certifications
• Lightweight IEC EN 61386-23
• UL FILENUMBER E308201
UL File No. E308201
Application range DNV, Lloyd’s Register
• Mechanical engineering Product Make-up
EN 45545-2 (HL-3)
• Public utilities • Fine-profile corrugated polyamide
6 conduit Colour delivered
• Railway applications / vehicle construction Grey (RAL 7031)
• Moving applications Black (RAL 9011), UV-resistant
EPIC®
Note
• Outdoor application (in black) • UV and weather-resistant in black Material
PA 6
Silicone-free
Halogen-free
Fire behaviour according to UL 94V-0
Temperature range
SKINTOP®
-40°C to +115°C
short-term +150°C
SILVYN®
61747010 18 14.3 × 18.5 40 — 13,5 -/13.5 50
61746960 21 16.5 × 21.2 45 20 × 1.5 16 25 × 1.5/16 50
61746970 28 23 × 28.5 55 25 × 1.5 21 32 × 1.5/21 50
61746980 34 29 × 34.5 65 32 × 1.5 29 40 × 1.5/29 25
61746990 42 36 × 42.5 90 40 × 1.5 36 50 × 1.5/36 25
61747000 54 48 × 54.5 100 50 × 1.5 48 63 × 1.5/48 25
SILVYN® RILL PA 6 black
61746935 10 6.5 × 10 13 10 × 1 7/- 12 × 1.5/7 50
FLEXIMARK®
Info
83251456 FLEXIMARK® Stainless steel SMC FCC LS 16-25 9.9 with cable tie 16 – 25 1
83251402 FLEXIMARK® Stainless steel SMC FCC 0-15 9.9 without cable tie 0 – 15 1
83251454 FLEXIMARK® Stainless steel SMC FCC 16-25 9.9 without cable tie 16 – 25 1
One line embossing / with srew hole
83251450 FLEXIMARK® Stainless steel SM FCC 0-15 9.9 with screw hole 0 – 15 1
83251478 FLEXIMARK® Stainless steel SM FCC 16-25 9.9 with screw hole 16 – 25 1
Two-line embossing / with cable tie brackets
83251426 FLEXIMARK® Stainless steel SMC2R FCC LS 0-15 13.9 with cable tie 0 – 15 1
ACCESSORIES
83251468 FLEXIMARK® Stainless steel SMC2R FCC LS 16-25 13.9 with cable tie 16 – 25 1
83251422 FLEXIMARK® Stainless steel SMC2R FCC 0-15 13.9 without cable tie 0 – 15 1
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
Blank markers could be found on the product page “SP Metalprint” (article no. 83251575 und 83251576).
APPENDIX
ÖLFLEX®
FLEXIMARK® Cablelabel PUR
UNITRONIC®
Info
ETHERLINE®
Benefits Note Technical data
• Good UV-resistance • Can be printed with the FLEXIMARK®
• Good chemical resistance Software and the FLEXIMARK Thermal ® Classification ETIM 5/6
HITRONIC®
transfer printer SQUIX or EOS4 ETIM 5.0/6.0 Class-Description:
• Highly flexible material
• Recommended ribbon: Cable coding system
• Hydrolysis and micro organism resistant
Text colour black: Colour delivered
Application range FTI-Y 60-360 BK (article no. 83260201), Standard colour: yellow, white
Text colour white: Also available in red, orange, blue,
• Markers could be used in any industry
FTI-X 55-300 WH (article no. 83260260) green and black
with a demanding environment
(e.g. oil & gas, railways) • With customized print: see product Material
• Can be mounted directly on the cable
FLEXIMARK® Cablelabel PUR FCC Halogen-free polyurethane
together with plastic cable ties Temperature range
Included -50°C to +100°C
• Delivered as a roll of labels
EPIC®
Norm references / Approvals Could also withstand +125°C
• Extremely flame-retardant according in the short term
to UL 94 V0
• MIL 81531 and MIL-STD-202G
Width × length
Article number Article designation Colour Markers/PU PU
(mm)
SKINTOP®
Mounting centrally (with 1 cable tie)
83280275 FLEXIMARK® Cablelabel PUR 20×30 YE Diamond yellow 30 × 20 1000 1
83280276 FLEXIMARK® Cablelabel PUR 20×30 WH Diamond white 30 × 20 1000 1
Mounting left (with 1 cable tie)
83280277 FLEXIMARK® Cablelabel PUR 55×12 YE yellow 12 × 55 1000 1
83280278 FLEXIMARK® Cablelabel PUR 55×12 WH white 12 × 55 1000 1
Mounting two-sided (with 2 cable ties)
83280279 FLEXIMARK® Cablelabel PUR 35×10 YE yellow 10 × 35 1000 1
83260191 FLEXIMARK® Cablelabel PUR 60×10 YE yellow 10 × 60 1000 1
83260192 FLEXIMARK® Cablelabel PUR 75×15 YE yellow 15 × 75 1000 1
SILVYN®
83260193 FLEXIMARK® Cablelabel PUR 75×25 YE yellow 25 × 75 500 1
83255321 FLEXIMARK® Cablelabel PUR 100×60 YE yellow 60 × 100 250 1
83280280 FLEXIMARK® Cablelabel PUR 35×10 WH white 10 × 35 1000 1
83260194 FLEXIMARK® Cablelabel PUR 60×10 WH white 10 × 60 1000 1
83260195 FLEXIMARK® Cablelabel PUR 75×15 WH white 15 × 75 1000 1
83260196 FLEXIMARK® Cablelabel PUR 75×25 WH white 25 × 75 500 1
83255322 FLEXIMARK® Cablelabel PUR 100×60 WH white 60 × 100 250 1
83280260 FLEXIMARK® Cablelabel PUR 60×10 RD red 10 × 60 1000 1
FLEXIMARK®
Suitable tools
• Ty-Gun ERG 50 / Ty-Gun ERG 120
Cable tie pliers
ÖLFLEX®
KNIPEX Cable shear
UNITRONIC®
Info
ETHERLINE®
Benefits Application range Technical data
• Special two-blade structure divides the • Cuts copper and aluminium cables
cutting process into pre-cut and post-cut Classification ETIM 5/6
HITRONIC®
• Easy and clean cut by using only one hand Product features ETIM 5.0/6.0 Class-ID: EC000142
• Precision ground, hardened blades ETIM 5.0/6.0 Class-Description:
• High ergonomics thanks to multi-
Cable shears
component handles
• Insulated handels allow working under
Certifications
voltage up to 1000 V Insulated according to IEC 60900,
applicable up to 1000 V AC/1500 V DC
VDE-tested
Material
High-grade special tool steel, forged,
chrome plated
EPIC®
Cable diameter Weight Length
Article number Article designation (mm) (kg) (mm)
KNIPEX Cable shear
62120523 Cable shear KASI 20 20 0.34 200
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
SKINTOP®
UNIVERSAL STRIP stripping tool
SILVYN®
FLEXIMARK®
Included
• Tool is always delivered with a length stop
36
info
Reach us around the world.
Or closer to home.
Image sources: LAPP, Maiwolf, Wolfram Scheible, Bystronic glass, Comau SpA, EMAG, Fotolia, iStock
Safety
Without exception, our products are tested for the environment may arise. For this reason, our guidelines, are contained in the tables in the ©
Copyright by U.I. Lapp GmbH. Reprinting or
application safety in accordance with defined cables must only be processed and/or used appendix to this catalogue. Our machines and reproduction of the text or the illustrations may
standards and our own regulations, which com- responsibly by trained electricians or special installation tools are – where necessary – de be made only with written approval and with
plement the standards. Relevant legal require- ists. This catalogue contains general informa- signed in accordance with the machine guide- correct indication of source. We reserve the
ments and safety regulations are also observed. tion for the application of each product. lines and display the CE identification mark. It right to make modifications to our products,
Provided due care and attention is paid, the Independent of such information, the applica- must be noted, however, that our machines and especially those based on technical improve-
possibility of product-specific danger to the tion standards DIN VDE 0298 and DIN VDE installation tools must only be used by trained ments or continued development. All illustra-
user may thus reasonably be excluded. Where 0891 for cables will apply. Excerpts from these specialist personnel and for the purpose for tions and numerical data etc. are therefore
products are used carelessly or incorrect ly, standards, as well as complementary selection which they were designed. without warranty and are subject to change.
however, considerable danger to persons and and application tables, design and installation
Follow LAPP on
11/18.1.500.99092432