Академический Документы
Профессиональный Документы
Культура Документы
CROSS REFERENCE
www.InvensysControls.com 1
Looking for a replacement gas valve? Then look for Robertshaw®
gas valves - the only complete line of combination gas heating
valves from 3/8” pipe low capacity models up to 1” high capacity
models. Robertshaw combination gas valves feature the reliability,
flexibility and convenience you require in a replacement control.
INDEX
GAS VALVES Page
Manual�������������������������������������������������������������������������������� 3
Hydraulic����������������������������������������������������������������������������� 4
24 Volt Combination����������������������������������������������������� 5, 12
2-Stage������������������������������������������������������������������������������� 6
Diaphragm�������������������������������������������������������������������������� 7
Line Voltage������������������������������������������������������������������������ 8
Millivolt������������������������������������������������������������������������������� 9
Bleed Gas������������������������������������������������������������������������� 10
Low Capacity�������������������������������������������������������������������� 11
Pilot Ignition��������������������������������������������������������������� 13, 14
Hot Surface Ignition���������������������������������������������������������� 15
Replacement Components����������������������������������������������� 16
Pressure Regulators���������������������������������������������������������� 17
Factory Model Code Identification���������������������������� 18, 19
Gas Valve Identification���������������������������������������������������� 20
Gas Valve Cross Reference������������������������������������������ 21-74
2 www.InvensysControls.com
700-100 MANUAL
The 700-100 manual gas valves from
Robertshaw® provide a manual control
with an automatic safety pilot. The 705
Series operators provide field conversion
to 24 VAC millivolt etc. See page 16 for a
complete list.
MODELS HAVE A
SLOTTED SAFETY
MAGNET
Specifications
Pilot outlet 1/4“ tubing
Gas cock dial markings Off - Pilot - On
Maximum ambient temperature 175° F
Pressure regulator (optional by model) Factory set at 3.5” W. C.
3-POSITION OUTLET
ROBERTSHAW INLET PRESSURE
FACTORY SIDE (FPT)
ORDER SIZE STRAIGHT-THRU REGULATOR CAPACITY1
MODEL WITH
NUMBER (FPT) (FPT) SETTING
PLUGS
3.5” W.C.
700-102 7000AMR 1/2” 1/2” 1/2” 100,000
NAT. GAS
3.5” W.C.
700-106 7000BMR 3/4” 3/4” 1/2” 300,000
NAT. GAS
STRAIGHT- 3.5” W.C.
700-114 ** 7000MHRC-S7C 1” 1” 720,000
THRU NAT. GAS
* A separate pressure regulator may be required for the system. Refer to field adaptable 1751 regulator kits.
** Has slow opening feature for soft ignition.
† Has thermopile type for safety magnet.
1 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas or 2500 BTU/Cu. Ft. 1.53 sp. gr. L.P. gas @ 1” W.C. pd.
www.InvensysControls.com 3
700-200 SNAP-ACTION &
SNAP-THROTTLE HYDRAULIC
The hydraulic combination valves from
Robertshaw® are thermostatically operated
by a remote temperature sensing bulb.
Models are available with single capillary
or remote dial in snap-action and
snap-throttle types.
MODELS HAVE A
SLOTTED SAFETY
MAGNET
Specifications
Temperature range
Standard dial 58° to 90° F Remote combination 18” & 48”
Remote dial 45° to 95° F Bulb O.D. & length 1/4” x 8”
Capillary length Gas cock dial marking Off - Pilot - On
Single 36” Ambient temperature -40° to 175° F
SNAP-ACTING
700-201 7000AS 1/2” 1/2” 36” NONE* 100,000
3.5” W.C.
700-202 7000ASR 1/2” 1/2” 36” 100,000
NAT. GAS
REMOTE
DIAL DUAL 3.5” W.C.
700-210 7000ASR-1H 1/2” 1/2” 100,000
CAPILLARY NAT. GAS
MODELS
1/2”
700-215 † 7000AS 1/2” STRAIGHT- 36” NONE* 100,000
THRU
10.0” W.C.
700-216 7000ASR-LP 1/2” 1/2” 36” 160,000
L.P. GAS
SNAP-THROTTLE
700-203 7000AST-3†† 1/2” 1/2” 36” NONE* 100,000
3.5” W.C.
700-205 7000ASTR-3 1/2” 1/2” 36” 100,000
NAT. GAS
4 www.InvensysControls.com
700-400 24 VOLT COMBINATION
The complete line of Robertshaw® 24 Volt combination
valves offer replacement flexibility. With capacities
ranging to 600,000 BTU, three-position outlets and
multi-positional capability, our combination gas valves
offer unlimited replacement possibilities. The 24 Volt
Uni-Kits® are suitable for either natural or L.P. gas.
Factory set at 3.5” W.C. natural gas, a regulator cover
plate is included to convert to L.P. gas.
MODELS HAVE A
SLOTTED SAFETY
MAGNET
Specifications
Electrical rating 12 VAC - 0.18 Amps Gas cock dial marking Off - Pilot - On
24 VAC - 0.2 Amps Terminal type Combination screw/spade
Pilot outlet 1/4” tubing Ambient temperature -40 to 175° F
3-POSITION OUTLET
ROBERTSHAW INLET PRESSURE
FACTORY
ORDER SIZE STRAIGHT- SIDE (FPT) REGULATOR CAPACITY1
MODEL
NUMBER (FPT) THRU WITH SETTING
(FPT) PLUGS
24 VOLT COMBINATION
STRAIGHT-
700-400 7000BER 1/2” 3/4” UNI-KIT 240,000
THRU
STRAIGHT-
700-406 7000BER 3/4” 3/4” UNI-KIT 300,000
THRU
3.5” W.C.
700-408 7000AER 1/2” 1/2” 1/2” 100,000
NAT. GAS
STRAIGHT- 3.5” W.C.
700-409 *** 7000BMSER 1/2” 1/2” 240,000
THRU NAT. GAS
STRAIGHT- 3.5” W.C.
700-410 7000BER 1/2” 1/2” 240,000
THRU NAT. GAS
* A separate pressure regulator may be required for the system. Refer to field adaptable 1751 regulator kits.
** Has slow opening feature for soft ignition. *** Has thermopile type safety magnet.
Pressure regulator settings for natural gas. LO = 2.0” W.C., HI = 4.0” W.C.
Pressure regulator settings for L.P. gas. LO = 5.4” W.C., HI = 11.0” W.C.
† Has gas converter feature; 3.5” W.C. natural gas or 11.0 W.C. L.P. gas. Set in natural position.
1 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas or 2500 BTU/Cu. Ft. 1.53 sp. gr. L.P. gas @ 1” W.C. pd.
www.InvensysControls.com 5
700 2-STAGE 24 VOLT
The Robertshaw® 2-stage 24 Volt gas valves,
standing pilot as well as intermittent pilot
models feature reliability, performance,
flexibility and easy installation all in one
compact control. These valves feature a
manual valve (gas cock), inlet/outlet screens,
pilot gas filter, and pilot adjustment key.
Models with automatic pilot safety magnet
‘slotted’ provide gas shut-off in case of pilot
outage. VALVES CAN BE MOUNTED IN ANY
POSITION EXCEPT UPSIDE DOWN.
Specifications
Electrical rating 24 VAC 50/60 Hz
0.2 Amps low-fire / 0.4 Amps high-fire
Pressure regulator (adjustable)
Natural gas Factory set @ 1.3” W.C. low-fire, 3.5” W.C. high-fire
L.P. gas Factory set @ 2.8” W.C. low-fire, 11.0” W.C. high-fire
Pilot outlet 1/4” tubing
Terminal type 1/4” quick-connect
Ambient temperature -40 to 175° F
Maximum inlet pressure 14” W.C. (1/2” PSI)
ROBERTSHAW INLET
ORDER FACTORY SIZE OUTLET SIZE
NUMBER MODEL (FPT) (FPT) TYPE OF GAS CAPACITY1
1
1000 BTU/Cu. Ft 0.64 sp. gr. nat. gas @ 1” W.C. pd.
• Has slow opening feature for soft ignition. Can be field removed.
6 www.InvensysControls.com
700-400 DIAPHRAGM/SOLENOID
Robertshaw® diaphragm gas valves are single
function, diaphragm types and are excellent
replacements for solenoid gas valves. Models
are available with or without a gas cock, and
regulated and non-regulated models are
available. Standard features include pilot outlet,
pilot gas filter and pilot adjustment key. VALVES
CAN BE MOUNTED IN ANY POSITION EXCEPT
UPSIDE DOWN.
NOTE: These valves DO NOT have a safety magnet.
Specifications
Electrical rating
12 VDC - 0.18 Amps
24 VAC - 0.2 Amps, 50/60 Hz, 120 VAC - .034 Amps, 50/60 Hz
240 VAC - .017 Amps, 50/60 Hz, 240 mV to 750 mV
Pressure regulator Factory set @ 3.5” W.C.
Pilot outlet 1/4” tubing
Ambient -40 to 175° F
Maximum inlet pressure 14” W.C. (1/2 PSI)
3-POSITION OUTLET
ROBERTSHAW INLET PRESSURE
FACTORY STRAIGHT- SIDE (FPT)
ORDER SIZE REGULATOR CAPACITY1
MODEL THRU WITH
NUMBER (FPT) SETTING
(FPT) PLUGS
* A separate pressure regulator may be required for the system. • Has slow opening feature for slow ignition.
Exact replacement for Carrier part number EF53CK198. † Has no gas cock.
1 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas or 2500 BTU/Cu. Ft. 1.53 sp. gr. L.P. gas @ 1” W.C. pd.
Two stage valve exact replacement for Carrier EF33CB241.
www.InvensysControls.com 7
700-450 & 700-460 LINE VOLTAGE
Offering the same replacement flexibility as the
24 Volt combination controls, Robertshaw® line
Voltage models are available in 120 and 240
VAC. Features include three-position outlets,
multi-positional capability and capacities
ranging up to 720,000 BTU.
MODELS HAVE A
SLOTTED SAFETY
MAGNET
Specifications
Electrical rating 120 VAC - 0.34 Amps
240 VAC - 0.17 Amps
Pilot outlet 1.4” tubing
Gas cock dial marking Off - Pilot - On
Cover type For conduit connection
Lead length 32”
Ambient temperature -40° to 175° F
3-POSITION OUTLET
ROBERTSHAW INLET PRESSURE
FACTORY
ORDER SIZE STRAIGHT- SIDE (FPT) REGULATOR CAPACITY1
MODEL THRU WITH
NUMBER (FPT) SETTING
(FPT) PLUGS
120 VOLT
3.5” W.C. NAT.
700-450 † 7000BGVER-120 1/2” 3/4” 1/2” 240,000
GAS
240 VOLT
3.5” W.C. NAT.
700-462 7000BER-240 1/2” 3/4” 1/2” 240,000
GAS
STRAIGHT- 3.5” W.C. NAT.
700-464 7000BER-240 3/4” 3/4” 300,000
THRU GAS
STRAIGHT- 3.5” W.C. NAT.
700-466 • 7000ERHC-240-S7C 1” 1” 720,000
THRU GAS
* A separate pressure regulator may be required for the system. Refer to field adaptable 1751 regulator kits.
** Diaphragm valve-no gas cock or safety magnet.
† Diaphragm valve-no safety magnet
†† Exact replacement for Frymaster part number 8070308 with thermopile type safety magnet.
1 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas or 2500 BTU/Cu. Ft. 1.53 sp. gr. L.P. gas @ 1” W.C. pd.
• Has slow opening feature for soft ignition.
8 www.InvensysControls.com
700-500 MILLIVOLT
Millivolt wall thermostat actuated combination
controls from Robertshaw® provide installation
flexibility from furnaces to swimming pool
applications. The complete line of 700-500 millivolt
gas valves offer a wide range of replacement
capability from small capacity 3/8” pipe to high
capacity 1” pipe up to 720,000 BTU usage.
Specifications
Electrical rating 250 mV - 750 mV
Pilot outlet 1/4” tubing
Gas cock dial marking Off - Pilot - On
Terminal type Combination screw/spade
Ambient temperature -40° to 175° F
3-POSITION OUTLET
ROBERTSHAW INLET PRESSURE
FACTORY STRAIGHT- SIDE (FPT)
ORDER SIZE REGULATOR CAPACITY1
MODEL THRU WITH
NUMBER (FPT) SETTING
(FPT) PLUGS
MILLIVOLT
700-501 7000AMV 1/2” 1/2” 1/2” NONE* 100,000
700-502 7000AMVR 1/2” 1/2” 1/2” 3.5” W.C. NAT. GAS 100,000
700-504 7000BMVR 1/2” 3/4” 1/2” 3.5” W.C. NAT. GAS 240,000
STRAIGHT-
700-505 7000BMV 3/4” 3/4” NONE* 300,000
THRU
STRAIGHT-
700-506 7000BMVR 3/4” 3/4” 3.5” W.C. NAT. GAS 300,000
THRU
700-507 † 7000BMVR-S7C 1/2” 3/4” 1/2” 3.5” W.C. NAT. GAS 240,000
STRAIGHT-
700-508 7000BMVR 1/2” 3/4” 3.5” W.C. NAT. GAS 240,000
THRU
STRAIGHT-
700-509 7000AMV 1/2” 1/2” NONE* 100,000
THRU
700-510 7000BMVR 3/4” 3/4” 1/2” 3.5” W.C. NAT. GAS 300,000
STRAIGHT-
700-513 ** 7010BGVMV 1/2” 1/2” NONE* 240,00
THRU
STRAIGHT-
700-515 7000BMVR-LP 3/4” 3/4” 10.0” W.C. L.P. GAS 485,000
THRU
STRAIGHT-
700-522 † 7000MVRHC-S7C 1” 1” 3.5” W.C. NAT. GAS 720,000
THRU
STRAIGHT-
700-524 • 7000BGVMVR 3/4” 3/4” 3.5” W.C. NAT. GAS 300,000
THRU
POOL HEATER
STRAIGHT-
700-511 7000BMVR-S7C 3/4” 3/4” UNI-KIT 300,000
THRU
* A separate pressure regulator may be required for the system. Refer to field adaptable 1751 regulator kits.
* * Diaphragm valve only - no gas cock or safety magnet.
† Has slow opening feature for soft ignition.
• Diaphragm valve - no safety magnet.
Excellent replacement for Teledyne-Lars pool heater valves. (This is a functional replacement.)
Does not have the auxiliary pilot lighting tube.
1 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas or 2500 BTU/Cu. Ft. 1.53 sp. gr. L.P. gas @ 1” W.C. pd.
Factory set @ 3.5” W.C. Includes a separate L.P. gas cover plate.
www.InvensysControls.com 9
700-800 BLEED GAS
Thermocouple and thermopile bleed gas
operated diaphragm valves from Robertshaw®
provide replacement capability for commercial
water heating and cooking applications.
The 700-800 diaphragm valve provides
on/off operation in response to the opening
and closing of the external bleed line by a
thermostatic bleed line valve.
MODELS HAVE A
SLOTTED SAFETY
MAGNET
Specifications
Pilot outlet 1/4” tubing
Gas cock dial marking Off - Pilot - On
THERMOCOUPLE TYPE
THERMOPILE TYPE **
10 www.InvensysControls.com
710 SERIES LOW CAPACITY
The Robertshaw® 710 Series features an
extremely compact control designed for low
capacity and limited space applications. Features
include three-position outlets, multi-positional
capability and component replaceability.
Specifications
Electrical rating
24 Volt models 12 VDC - 0.18 Amps
24 VAC - 0.2 Amps
Millivolt models 250 mV to 750 mV
Gas cock dial marking Off - Pilot - On
Temperature range (hydraulic) 58° F to 90° F
Ambient temperature 175° F
Dimensions 3-13/16” H x 4-21/32” L x 1-29/32” W
Capacity 40,000 minimum
70,000 maximum
@ 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas @ 1” W.C. pd.
3-POSITION
ROBERTSHAW INLET OUTLET REDUCER PRESSURE
FACTORY CAP.
ORDER SIZE (FPT) WITH BUSHINGS REGULATOR APPLICATION
MODEL LENGTH
NUMBER (FPT) 1/2” PIPE INCL. (FPT) SETTING †
PLUGS
MANUAL
710-101 7000MLC NONE ††
(2) 1/2” x
1/2” 1/2” N/A 3.5” W.C. GENERAL
710-102 • 7000MRLC 3/8”
NAT. GAS
HYDRAULIC - SNAP-ACTION
710-201 18” RECREATIONAL
7000SLC NONE ††
VEHICLES
710-203 36”
1/2” 1/2” WALL
710-204 • (2) 1/2” x 18”
3.5” W.C. FURNACES
7000SRLC 3/8” NAT. GAS REPLACES
710-205 •
TV-27
36”
CATERING
710-218 7000SLC 3/8” 3/8” NONE ††
TRUCKS
24 VOLT AC OR 12 VOLT DC
710-401 7000ELC (2) 1/2” x 3/8” NONE ††
WALL
(1) 1/2” x 3/8” FURNACES
710-402 • 1/2” 1/2” N/A
(1) 1/2” x 1/2” 3.5” 12 VDC
7000ERLC
INVERTED W.C. NAT. GAS 24 VAC
710-404 •
FLARE
MILLIVOLT NOTE: USE TWO LEAD THERMOPILES ONLY
HIGH-LOW
710-503 7000MVRB-5-LC FIREPLACE
(1) 1/2” x ADJUSTABLE
3/8” LOG
3/8” 1.7” TO 3.5” W.C.
CONTROL
NATURAL GAS
710-511 7000MVRB-4-LC
* Has no safety valve (no magnet). † 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas @ 1” W.C. pd.
** Use for 12 VDC applications. †† A separate pressure regulator may be required for the system.
• Regulated 710 series gas valves can be converted from natural to L.P. gas by using the replacement pressure regulators.
Temperature range is 100-250° F.
www.InvensysControls.com 11
720 SERIES 24 VOLT DUAL
The Robertshaw® 720 Series constant pilot gas valve is
a six function gas valve incorporating a manual valve,
safety shut-off magnet, dual automatic valves, main gas
regulator, and pilot adjustment. Models are available
with and without a pressure regulator. Uni-Kits® are
factory set at 3.5” W.C. for natural gas, but can be
converted to L.P. by installing the regulator conversion
kit included.
The wiring connections, manual selector and adjustments are easily accessible
on top of the valve. With a 3-9/16” swing radius, the 720 series lends itself well
to replacing many OEM valves. VALVES CAN BE MOUNTED IN ANY POSITION
EXCEPT UPSIDE DOWN.
Specifications
Electrical rating 24 VAC, 5 Amps, 50/60 Hz
Pressure regulator
Natural gas Factory set at 3.5” W.C.
L.P. gas Factory set at 11.0” W.C.
Pilot outlet 1/4” tubing
Ambient temperature -40° to 175° F
Maximum inlet pressure 14” W.C. (1/2 PSI)
SIDE
ROBERTSHAW INLET OUTLET OUTLET PRESSURE
FACTORY STRAIGHT-
ORDER SIZE SIZE 1/2” FPT REGULATOR CAPACITY1
MODEL THRU
NUMBER (FPT) (FPT) WITH SETTING
PLUGS
STANDING PILOT
720-400 7200ER 1/2” 3/4” • UNI-KIT 150,000
1
1,000 BTU/Cu. Ft. 0.64 sp. gr. natural gas, or 2,500 BTU/Cu. Ft. sp. gr. L.P. gas @ 1” W.C. pd.
* Has step-opening feature opens to 25% of full flow. Full flow within 30 seconds.
** A separate pressure regulator may be required for the system.
Has convertible regulator designed for mobile home use. Select 3.5” W.C. Nat. Gas or 11.0” L.P. gas.
† Has step-opening feature opens to 40% of full flow. Full flow within 30 seconds.
Has slow-opening feature for soft ignition.
12 www.InvensysControls.com
700 SERIES PILOT IGNITION
The Robertshaw® 700 Series Pilot Ignition Gas
Valves are designed for intermittent pilot ignition
applications. These universal models include all the
necessary parts to adapt the valves to direct spark
or hot surface applications. Each valve incorporates
a manual valve, pilot valve, and a main gas pressure
regulator (optional by model.) These valves are
designed for many residential and commercial
applications such as central heating units, wall
heaters, boilers and mobile home furnaces.
Specifications
Electrical 24 Volt, 60 Hz
Ambient rating -40° F to +175° F
Capacity (maximum regulation)
1/2” x 3/4” straight-thru 300,000
3/4” x 3/4” straight-thru 350,000
1” x 1” 720,000
3/4” x 1” 530,000*
3/4” x 3/4” 450,000*
Pressure regulator setting see ordering chart
Maximum inlet pressure 14” W.C. (1/2 PSI)
SIDE
ROBERTSHAW INLET OUTLET PRESSURE
FACTORY OUTLET 1/2”
ORDER SIZE SIZE REGULATOR CAPACITY1
MODEL FPT WITH
NUMBER (FPT) (FPT) SETTING
PLUGS
www.InvensysControls.com 13
720 SERIES PILOT IGNITION
The Robertshaw® 720 Series Valves are designed
for intermittent pilot ignition applications. This
series incorporates a manual valve, pilot valve,
dual automatic valves (2), and a main gas pressure
regulator. Uni-kits® are factory set at the 3.5” W.C. for
natural gas, but can be converted to L.P. by installing
the regulator conversion kit included. The 720 Series
is designed for many residential applications such
as central heating units, space heaters, wall heaters,
boilers, and mobile home furnaces. This valve has a compact swing radius of only
3-9/16” to enable it to fit a wide range of OEM replacement applications.
Specifications
Electrical rating 24 VAC, 50/60 Hz, 45 Amps
Power consumption 5 Watts
N.E.C. Class 2
Terminal connections 1/4” quick connect
Pilot outlet 1/4” tubing
Ambient temperature -40° to 175° F max.
Maximum inlet pressure 14” W.C. (1/2” PSI)
Pressure regulator setting see ordering chart
SLOW-OPENING
720-070 7200IPER-S7C 1/2” 3/4” STRAIGHT-THRU UNI-KIT 150,000
NEGATIVE PRESSURE
720-074 7200DERN 1/2” 3/4” -0.2” W.C. NAT. GAS 150,000
STEP-OPENING
720-078 7200DERB-5-SO-2 † 1/2” 3/8” 125,000
2-STAGE
720-082 7200IPER2-4 3/4” 3/4” 2-STAGE 150,000
1
1,000 BTU/Cu. Ft. 0.64 sp. gr. natural gas, or 2,500 BTU/Cu. Ft. sp. gr. L.P. gas @ 1” W.C. pd.
• Has slow-opening feature for soft ignition - DO NOT USE ON HOT SURFACE APPLICATIONS.
† Note factory model type is 7200DERN.
Has special “RB” pressure regulator field adjustable from 2.0” to 4.0” W.C. natural gas - replacement for Williams furnace P270900.
Special “NEGATIVE PRESSURE” gas valve, note factory model type is 7200 DERN. Has no pilot outlet.
Low-Fire 1.3” W.C., High-Fire 3.5” W.C.
14 www.InvensysControls.com
720 SERIES HOT SURFACE
The Robertshaw® 720 Series Gas Controls are
designed for hot surface ignition applications. This
series incorporates a manual valve, pilot valve (IPER
models only), dual automatic valves (2) and a main
gas pressure regulator. Uni-Kits® are factory-set
at 3.5” W.C. for natural gas, but can be converted
to L.P. by installing the regulator conversion kit
included. The 720 Series Valves are designed for
many residential applications such as central heating
units, space heaters, wall heaters, boilers and mobile
home furnaces. This series valve has a compact swing radius of only 3-9/16” to
enable it to fit a wide range of OEM replacement applications.
Specifications
Electrical ratings 24 VAC, 5 Amps
Pressure regulator
Natural gas Factory set at 3.5” W.C.
L.P. gas Factory set at 11.0” W.C.
Pilot Outlet (optional by model) 1/4” tubing
Ambient temperature -40° to 175° F
Maximum inlet pressure 14” W.C. 1/2” PSI
SIDE
ROBERTSHAW INLET OUTLET PRESSURE
FACTORY OUTLET 1/2”
ORDER SIZE SIZE REGULATOR CAPACITY1
MODEL FPT WITH
NUMBER (FPT) (FPT) SETTING
PLUGS
720-051 7200DER 1/2” 3/4” • UNI-KIT 150,000
SLOW OPENING †
7200DER-S7C STRAIGHT-
720-050 1/2” 1/2” UNI-KIT 150,000
(HAS PILOT OUTLET) THRU
STEP-OPENING
7200DER-SO-3
720-054 1/2” 3/4” • UNI-KIT 150,000
(HAS PILOT OUTLET)
2-STAGE
720-082 7200IPER2-4 3/4” 3/4” 2-STAGE 150,000
1
1,000 BTU/Cu. Ft. 0.64 sp. gr. natural gas, or 2,500 BTU/Cu. Ft. 1.53 sp. gr. L.P. gas @ 1” W.C. pd.
Has NO pilot outlet.
Has pilot tubing outlet exact replacement for Rheem P/N - 60-22525-06.
† Has slow-opening feature for soft ignition. NOTE: Do not use on hot surface applications unless original valve has
slow-opening feature.
Has “RB” hi-low pressure regulator. See page 18.
Low-Fire 1.3” W.C., High-Fire 3.5” W.C.
www.InvensysControls.com 15
REPLACEMENT COMPONENTS
ROBERTSHAW PRESSURE
FACTORY CAPILLARY
ORDER VALVE TYPE REGULATOR ILLUSTRATION
MODEL LENGTH
NUMBER SETTING
705 OPERATORS
705-201 S 36” NONE*
705-404 ER2-4
705-402
705-452 ER 120 VOLT 3.5” W.C. NAT. GAS
705-501 MV NONE*
MILLIVOLT N/A
705-502
16 www.InvensysControls.com
PRESSURE REGULATORS
ROBERTSHAW
NAT.
ORDER REGULATOR TYPE LOW HIGH L.P. GAS ILLUSTRATION
GAS
NUMBER
REGULATOR COVER
1751-007* •
TYPE
* Contains a regulated 700 gas valve to a non-regulated valve for use with L.P. gas.
A separate pressure regulator may be required for the system.
† Used on 7100 & 7200 Factory model gas valves.
†† Used on 7100 & 7200 Factory model step-opening gas valves.
www.InvensysControls.com 17
FACTORY MODEL CODE IDENTIFICATION FOR
ROBERTSHAW® GAS VALVES
FACTORY
MODEL
NUMBER
7000
2000
7200
DESCRIPTION
• A nitrol 7000 Body with small diameter valve seat. 100,000 BTU.
U
• B Unitrol 7000 Body with large diameter valve seat. 240,000 or
300,000 BTU.
• BB Unitrol 7000 Body with medium diameter valve seats - Intrinsically
“non-hunting”.
• 7010 Unitrol 7000 Body without a gas cock.
• CSTR Convertible Hydraulic Actuator - from natural to L.P. gas.
• • • D Solenoid Valve - Pilot Gas - single coil operated on AC.
• • • E Electric Actuator - 24VAC.
• E12 Electric Actuator - 12VDC.
• • • E120 Electric Actuator - 120VAC.
• • E240 Electric Actuator - 240VAC.
• EH Electric Heat Motor Actuator (Obsolete).
• EM Electric Actuator with manual override (Obsolete).
• ESTR-SS Electric Solid-State Actuator (Obsolete).
• F Factory Fixed (Not Adjustable regulator setting (3.5° to 5.0° W.C.).
• GO Bleed Gas Operated Actuator.
• GS Gas Cock Safety - with gas cock and safety valve - no main valve.
• GV Gas Valve without a safety valve - No Safety Magnet.
• -1H Remote dial hydraulic type - dual bellows.
• • HC High Capacity Body.
• HHC High Capacity Body. AGA rated for side ways or vertical mounting.
Can be replaced by ‘HC’ model.
• • • IPER Intermittent pilot ignition gas valve - regulated.
• L Relight Interlock type. A European requirement.
• • LC Low Capacity Body - 710 Series.
• • • LP For liquefied petroleum gases.
• M Manual Actuator.
• MS Millivolt Safety Magnet - uses thermopile type safety.
• MV Millivolt Actuator.
• • P Pulse Combustion.
• • • R Regulator Type.
• • RB Adjustable (High-Low) pressure regulator adjusts percentage of output.
-3 =50% of full flow
-4 =60% of full flow
-5 =70% of full flow
-6 =80% of full flow
18 www.InvensysControls.com
FACTORY
MODEL
NUMBER
7000
2000
7200
DESCRIPTION
• • • RC convertible regulator from natural to L.P. and back.
• RN Negative Pressure Regulator.
• R1 Class I and II Natural Gas Pressure Regulator.
• • • R2 Two-stage pressure regulator valve opens to percentage of full flow as
indicated by the number.
-1 =30% of full flow
-2 =40% of full flow
-3 =50% of full flow
-4 =60% of full flow
-5 =70% of full flow
-6 =80% of full flow
• S Hydraulic Snap-Acting Actuator - non regulated.
• SO Step-opening regulated with factory fixed setting.
30 seconds max. To full flow:
-1 =30% of full flow
-2 =40% of full flow
-3 =50% of full flow
-4 =60% of full flow
-5 =70% of full flow
• SR Hydraulic Regulated Snap-Acting Actuator.
• ST Hydraulic Snap - Throttle Actuator, but set-up for use on a specific
gas; natural gas only or L.P. gas only. Non-regulated number indicates
percentage of By-Pass flow.
-2 =40% of full flow
-3 =50% of full flow
-4 =60% of full flow
-5 =70% of full flow
• STR H
ydraulic Snap-Throttle Actuator, regulated. Number indicates
percentage of By-Pass flow.
-2 =40% of full flow
-3 =50% of full flow
-4 =60% of full flow
-5 =70% of full flow
• • • S7 Slow Opening devices with either a plastic body or a metal body Orifice
Valve Assembly
A =0 to 5 seconds to full flow
B =5 to 10 seconds to full flow
C =10 to 30 seconds to full flow
• S13 Slow Opening Control with .0135” orifice in body, but no other “Slow
Opening” device. 0 to 5 seconds to full flow.
• S36 Slow Opening Control with two .018” orifice - one in Body and one in
Cover, but no other Slow Opening device. 5 to 10 seconds to full flow.
www.InvensysControls.com 19
TIPS ON SELECTING A REPLACEMENT GAS VALVE
Safety Warning: Any work on gas valves or equipment should be preformed
by a qualified service technician only. Please do not attempt any repairs or
replacement if you are not qualified. Serious injury can occur from improper
installation or usage.
Manufactured by
Model Type
Factory No. (9 digits) and Max. PSI Rating
Regulator information
Application information
Robertshaw Part Number or OEM Number
Date Code (Year 09, Week 23)
An OEM valve may have an OEM part number instead of the Robertshaw
part number. The cross reference on the following pages will cross most
nine-digit factory numbers or OEM part numbers to the Robertshaw
numbers.
Gas valves with white labels are usually manufactured to be used on natural
gas applications. Red labels indicate the valves are usually manufactured to
be used on L.P. gas applications.
Any additional characters after the 9 digit factory number are used for
shipping purposes and should be ignored when cross referencing.
20 www.InvensysControls.com
GAS VALVE CROSS REFERENCE
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
22 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
24 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
26 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
28 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
30 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
32 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
34 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
36 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
38 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
40 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
42 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
www.InvensysControls.com 43
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
44 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
46 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
48 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
50 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
52 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
54 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
56 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
58 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
60 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
62 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
64 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
66 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
68 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
70 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
72 www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part
74 www.InvensysControls.com
Disclaimer: The cross references provided in this booklet are
intended to be functional equivalents and not exact matches
of products listed. Invensys Controls assumes no liability in
connection with the information contained herein and makes
no representations regarding the accuracy of any such
information. Final selection of a replacement product is the
sole responsibility of the buyer.
www.InvensysControls.com
OEM Robertshaw OEM Robertshaw OEM Robertshaw
Part Part Part Part Part Part