Академический Документы
Профессиональный Документы
Культура Документы
2014 - 2015
Rivulis
I r r igation
Israel
Rivulis
I r r i ga ti on
Contact Information
FRANCE SPAIN
Rivulis Irrigation, S.A.S. Rivulis Irrigation - Spain
13 Chemin de Novital c/D, Pol. Ind. Manzanares
Zi la Pointe 13200 Manzanares (Ciudad Real)
31150 Lespinasse, France Spain
Tel.:+33 (0)5 34 27 05 05 Tel.:+34-926-646-300
Fax: +33 (0)5 61 35 41 86 Fax: +34-926-647-149
ISRAEL
Rivulis Irrigation - Israel
Kibbutz, Gvat, MP Ha’amakim 3657900
Israel
Tel.: +972-737-800-234
Fax: +972-737-800-425
Table of Contents
22 06 170 15
07 190 20
08 250 30
10 340 40
15 380 50
500
1000
1350
16/10 1830 29
16/15 1250 29
22/7 1972 29
22/8 1695 29
22/15 915 29
Pallet Dimension:
10 15 1000 1830 101001508 Custom 160
1,02 m x 1,02 m x 1,14 m
10 20 500 1830 101001511 Standard 20
Truck
10 30 340 1830 101001515 Standard 20
Rolls per pallet: 20
Pallet Dimension:
15 20 500 1250 101001745 Standard 20
1,3 m x 1,2 m x 1,17 m
15 30 340 1250 101001748 Standard 20
15 50 380 1250 101001754 Custom 160
Filtration requirements:
(Based on l/h/dripper)
l/h Micron Mesh
< 0,65 80 200
0,65-1,2 100 150
> 1,2 130 120
Purchasing Information
T-Tape 22 mm
Container
Rolls per pallet: 16
Pallet Dimension:
1,02 m x 1,02 m x 1,14 m
Truck
Rolls per pallet: 20
Pallet Dimension:
1,3 m x 1,2 m x 1,17 m
16/6 3048 29
Truck Quantities
16/8 2286 29
Dia/mil Tautliner (13,6 x 2,4 m x 2,4 m)
16/10 1828 29
All 768
22/8 1737 29
22/10 1524 29
Pallet Dimension:
1,10 m x 1,10 m x 1,14 m
10 30 300 1828 101001237 Custom 160 Truck
Rolls per pallet: 16
Pallet Dimension:
1,10 m x 1,10 m x 1,14 m
Technical Data
Ro-Drip 22 mm
Diameter: 22 mm
0,55
Operating
bar
pressure:
0,55
Pressure (for flow
bar
rate calculation):
Filtration requirements:
(Based on l/h/dripper)
l/h Micron Mesh
< 0,65 80 200
0,65-1,2 100 150
> 1,2 130 120
Purchasing Information
Ro-Drip 22 mm
Container
Pallet Dimension:
1,10 m x 1,10 m x 1,14 m
Truck
Rolls per pallet: 16
Pallet Dimension:
1,10 m x 1,10 m x 1,14 m
Filtration requirements:
(Based on l/h/dripper)
l/h Micron Mesh
< 0,65 80 200
0,65-1,2 100 150
> 1,2 130 120
Purchasing Information
Hydrodrip 16 mm
Rolls Per Pallet:
16/10, 16/15, 16
22/10, 22/15,
16/18, 16/25, 20
22/25
Technical Data
Hydrodrip 22 mm
Diameter: 22
mm
Filtration requirements:
(Based on l/h/dripper)
l/h Micron Mesh
< 0,65 80 200
0,65-1,2 100 150
> 1,2 130 120
Purchasing Information
Hydrodrip 22 mm
Rolls Per Pallet:
16/10, 16/15, 16
22/10, 22/15,
16/18, 16/25, 20
22/25
The Pro-Grip Drip Tape Fittings contain many features that make them
stand out above the rest. Features such as smooth wings on the body,
allowing users to install many fittings with less stress on their hands.
Large ridges on the nuts make them easier to tighten, and an
advanced sealing interface provides for a positive seal. Additionally,
the long tape barb helps guide the drip tape into the right position, and
ensures a better seal by allowing more drip tape past the seal point.
The bright green nut color makes them more visible in the field and
during tape retrieval.
PRO-GRIP - Coupling 17
PRO-GRIP - Coupling 17
PRO-GRIP - Tees 17
5/8" Tape Coupling x 520 Barb 101001158 Standard 500 100 500
5/8" Tape x 400 Barb w/ Valve 101008189 Custom 600 100 600
5/8" Tape x 500 Barb w/ Valve 101001847 Standard 600 100 600
5/8" Tape x 425 Barb w/ Valve 101001846 Standard 500 100 500
5/8" Tape x 520 Barb w/ Valve 101001848 Standard 500 100 500
5/8" Tape x 3/4" MPT w/ Valve 101001850 Standard 400 100 400
5/8" Tape x 5/8" Tape w/ Valve 101001851 Custom 400 100 400
* @ 1,0 bar
Container Quantities
Diameter/wall Tautliner (13,7 m) 20' 40' 40' HC
12 mm 500 190 380 420
Roll Size
Dia/mil (m) (kg)
12 mm 600 21
16 mm 400 22
20 mm 300 22 Hydrogol
Dia. Hose Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Purchasing
Information
Hydrogol
Hydrogol is a made to
order product. Contact
Customer Service for
production lead times.
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Technical Data
Hydrogol
Operating 1,0
pressure: bar
Purchasing
Information
Hydrogol
Hydrogol is a made to
order product. Contact
Customer Service for
production lead times.
Dia. Hose Color Wall Spacing Flow Rate Roll Item Order Minimum
Length Number Status Order Qty
Technical Data
Hydrogol
Operating 1,0
pressure: bar
Purchasing
Information
Hydrogol
Hydrogol is a made to
order product. Contact
Customer Service for
production lead times.
100
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Purchasing
Information
D2000 16 mm/ 30
mil
Rolls per pallet: 28
Outlet Style
Wall Thickness Outlet
(mil)
15 Slit
18-47 Hole
3 – 12 roll pallet 548 Roll 240 (20 pallets) 480 (40 pallets) 22/15 800 22,2 2
22/25 500 25,0 2
23/40 350 23,5 3
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
16 Black ● 35 2.0 100 500 101045040 Custom 28000 40 mil 3,5 bar
Minimum 0,5
pressure: bar
16 Black ● 40 1,0 20 400 101022165 Custom 22400
Filtration requirements:
(Based on l/h/dripper)
l/h Micron Mesh
≤ 1,20 100 150
>1,20 130 120
Purchasing
Information
D5000 17 mm
Rolls per pallet:
45 mil 28
Technical Data
D5000 Drip Line - 20 mm / 40 and 45 mil 06 D5000 20 mm
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum Maximum operating
Length Number Status Order Qty pressure:
40 mil 3,0 bar
(mil) (l/h) (cm) (m) (m)
45 mil 3,5 bar
20 Black ● 40 1,0 50 350 101038841 Custom 19600
Minimum 0,5
20 Black ● 40 1,0 60 350 101040218 Custom 19600 pressure: bar
20 Black ● 40 1,5 50 350 101038846 Custom 19600
Filtration requirements:
20 Black ● 40 1,5 60 350 101045093 Custom 19600 (Based on l/h/dripper)
l/h Micron Mesh
20 Black ● 40 2,0 50 350 101038851 Custom 19600
≤ 1,20 100 150
20 Black ● 40 2,0 60 350 101045096 Custom 19600
>1,20 130 120
20 Black ● 40 2,0 100 350 101045098 Custom 19600
Purchasing
Information
20 Black ● 45 2,0 50 300 101038490 Custom 21600 D5000 20 mm
20 Black ● 45 2,0 75 300 101045105 Standard 7200 Rolls per pallet:
20 Black ● 45 2,0 100 300 101045106 Custom 21600 40 mil 28
45 mil 24
Technical Data
D5000 Drip Line - 22 mm / 25 mil 06 D5000 22 mm
Maximum operating
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum pressure:
Length Number Status Order Qty
25 mil 2,5 bar
(mil) (l/h) (cm) (m) (m)
Minimum 0,5
22 Black ● 25 1,5 30 500 101038883 Custom 28000 pressure: bar
Filtration requirements:
(Based on l/h/dripper)
l/h Micron Mesh
≤ 1,20 100 150
>1,20 130 120
Purchasing
Information
D5000 22 mm
Rolls per pallet:
25 mil 28
Diameter (Roll Length) Tautliner (13,7 m) 20' 40' 40' HC Dia/mil (m) (kg)
Hydro PC - 12 mm / 35 mil 05
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Hydro PC - 20 mm / 45 mil 05
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Purchasing
Information
Hydro PC
In loose pack and can
be packaged by pallets
upon request with
additional
fees Rolls per pallet: 9
No-Drain Feature
- Highly accurate floating diaphragm - maintains constant flow rate at
variable inlet pressures
- No-Drain feature reduces the ingestion of soil particles on system
shut down and is ideal for subsurface applications
- Ideal for pulse irrigation
- Self-cleaning mechanism
16 40 16 1,35-1,75-2,35-3,75 33
17 45 17 1,35-1,60-2,35-3,75 40
20 47 20 1,35-1,75-2,35-3,60 50
60
75
100
125
150
Hydro PCND 20 mm
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
Technical Data
Hydrobloom
Operating pressure
Hydrobloom Drip line- Hydro PCND Drippers 05 range: 0,8 - 3,5 bar
Filtration requirements:
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum (Based on l/h/dripper)
Length Number Status Order Qty
l/h Micron Mesh
(mil) (l/h) (cm) (m) (m) ≤ 1,20 100 150
16 Brown ● 45 2,35 33 100 101010067 Standard 4 800 >1,20 130 120
Purchasing
Information
Hydrobloom
In loose pack and can
be packaged by pallets
upon request with
additional fees
Dia. Hose Color Wall Flow Rate Spacing Roll Item Order Minimum
Length Number Status Order Qty
16 Brown ● 45 2,0 100 100 101024672 Standard 4 800 l/h Micron Mesh
≤ 1,20 100 150
16 Brown ● 45 2,0 120 100 101024674 Custom 28 800
>1,20 130 120
16 Brown ● 45 2,0 150 100 101024675 Custom 28 800
Purchasing
Information
Hydrogol
Hydrogol is a made to
order product. Contact
Customer Service for
production lead times.
Note: Available in brown, white, purple, and green.
Reliable Connections
Rivulis Irrigation is making a good connection in the
field with the insert drip line fittings. From an extensive
line of barb fittings, reducers, elbows, and adapters,
we’ve got the fitting for you. Because the fittings are so
well engineered, they create good seals and have a grip
that’s hard to break.
Hydroclip
(bag) (box)
(bag) (box)
(bag) (box)
(bag) (box)
(bag)
E1000 Dripper
Rivulis
I r r i ga ti on
E1000 Dripper 10
Image Base Flow Rate Outlet Outlet Item Order Min.
Color Color Type Number Status Qty.
(l/h)
1. E1000 8,0 l/h
Black 2,00 Brown ● Multi-Port 201013383 Standard 1000
2. E1000 Dripper
Maintenance Tool
Dripper | E1000
Katif Flow Regulated Dripper Dripper | Katif
Katif - Side Outlet 2,30 l/h Katif - Top Outlet 3,75 l/h
(l/h)
Technical Data
Katif
Black ● 2,30 Black ● Top Outlet 101003179 Standard 1000 Operating 0,8-3,0
pressure range: bar
1 Black ● 3,75 Red ● Top Outlet 201000055 Standard 1000 Use 2,8 mm Punch
Filtration requirements:
Black ● 8,00 Green ● Top Outlet 201000056 Standard 1000 (Based on l/h/dripper)
l/h Micron Mesh
All Models 130 120
Option
Bags :1 000
Dripper | Katif
Supertif Flow Regulated Dripper Dripper | Supertif
(l/h)
1. Supertif - Conic, 25 l/h
Black ● 2,20 Brown ● Conic 201000058 Custom 500
Purchasing Information
Supertif
Sold in bag quantities only.
Bag quantity: 1000
Box Quantity: 4000
Bag x Box: 4x1000
Box: 47 X 37 X 26,5 cm
Dripper | Supertif
Dripper | Supertif
Technical Data
Supertif ND Flow Regulated Dripper 08
Supertif ND
Image Base Flow Rate Outlet Outlet Item Order Min. ND: No Drain
Color Color Type Number Status Qty.
Operating 0,7 to
(l/h) pressure range: 3,5 bar
Sealing pressure: 0,15
Brown ● 1,10 Grey ● Conic 201000066 Custom 500 bar
Filtration requirements:
1 Brown ● 2,20 Brown ● Conic 201000061 Standard 500
l/h Micron Mesh
Brown ● 3,85 Black ● Conic 201000062 Standard 500
≤1,6 100 150
Brown ● 7,80 Green ● Conic 201000064 Standard 500 >1,6 130 120
Purchasing Information
Supertif ND
Brown ● 2,20 Brown ● Barb (SLB) 201000241 Standard 500
Sold in bag quantities only.
Bag quantity: 1000
Side Outlet Box Quantity: 4000
2 Brown ● 2,20 Brown ● 101003191 Standard 500
Barb (SOL)
Box: 47 X 37X 26,5 cm
1. Supertif ND 2. Supertif ND
Barb (SLB), 2,2 l/h Side Outlet barb (SOL), 2,2 l/h
Technical Data
Supertif NDH Flow Regulated Dripper 08
Supertif NDH
Image Base Flow Rate Outlet Outlet Item Order Min. ND: No Drain
Color Color Type Number Status Qty.
H (A): High Pressure
(l/h) Operating 1,2 to
pressure range: 3,5 bar
Brown ● 1,60 Lt. Grey ● Conic 101011749 Standard 500
Sealing pressure: 0,35
1 Brown ● 3,10 Blue ● Conic 101011750 Standard 500 bar
Filtration requirements:
Brown ● 8,00 Cl. Green ● Conic 101011752 Standard 500
l/h Micron Mesh
Brown ● 11,00 Red ● Conic 101011753 Standard 500 ≤1,6 100 150
>1,6 130 120
Brown ● 3,10 Blue ● Barb (SLB) 101011754 Standard 500 Purchasing Information
Supertif NDH
Sold in bag quantities only.
Side Outlet Bag quantity: 1000
2 Brown ● 3,10 Blue ● 101011757 Standard 500
Barb (SOL)
Box Quantity: 4000
Box: 47 X 37 X 26,5 cm
Dripper | Supertif
Dripper | Supertif
Technical Data
Supertif ND MOP Flow Regulated Dripper 08
Supertif ND MOP
Image Base Flow Outlet Outlet Item Order Min. ND: No Drain
Color Rate Color Type Number Status Qty.
Operating 1,3 to
(l/h) pressure range: 3,5 bar
Purchasing Information
Supertif ND MOP
Sold in bag quantities only.
Bag quantity: 1000
1. Supertif ND MOP - Side Box Quantity: 4000
Outlet barb, 3,85 l/h
Box: 47 X 37 X 26,5 cm
Technical Data
Supertif NDH MOP Flow Regulated Dripper 08
Supertif NDH MOP
Image Base Flow Outlet Outlet Item Order Min. ND: No Drain
Color Rate Color Type Number Status Qty.
Operating 1,3 to
(l/h) pressure range: 3,5 bar
Blue ● 1,6 Dk. Gray ● Conic 201000067 Standard 500 Opening 0,70
pressure: bar
Blue ● 3,1 Blue ● Conic 101003180 Standard 500 Sealing pressure: 0,20
bar
Blue ● 5,3 Violet ● Conic 101003181 Standard 500
Filtration requirements:
2 Blue ● 8,0 Lt. Green ● Conic 201000063 Standard 500 l/h Micron Mesh
≤1,6 100 150
Dripper | Supertif
Dripper | Assemblies
Dripper | Assemblies
Dripper | Assemblies
Dripper Assemblies
Rivulis
I r r i ga ti on
Snapeg Supertif ND Conic 1,10 Grey ● 40 White ● 101041946 Custom 800 1. Supertif ND
Assembly Snapeg /
Snapeg Supertif ND Conic 1,10 Grey ● 50 White ● 101041950 Custom 800 2,20 l/h, Black
Tubing
Snapeg Supertif ND Conic 1,10 Grey ● 60 White ● 101022829 Custom 800
Snapeg Supertif ND Conic 1,10 Grey ● 70 White ● 101041956 Custom 800
Snapeg Supertif ND Conic 1,10 Grey ● 80 White ● 101041960 Custom 800
Dripper | Assemblies
Dripper Assemblies Dripper | Assemblies
(cm)
1. Dripeg
1 2-Way Stackable
2 Tubing (White)
3 Manifold Dripeg
Dripper | Assemblies
Dripper | Assemblies
Dripper Assemblies
Rivulis
I r r i ga ti on
(cm)
(Black)
4-Way barbed, Black Soft PE
Polytif 50 Black ● 101003248 Custom 300
3X5 mm-50 cm, Black Polytif
4-Way barbed, Black Soft PE
1. Peg Assembly
Polytif 60 Black ● 101003250 Custom 200 4-Way, Dripeg
3X5 mm-60 cm, Black Polytif
4-Way barbed, Black Soft PE
Polytif 70 Black ● 201003420 Custom 200
3X5 mm-70 cm, Black Polytif
4-Way barbed, Black Soft PE
Polytif
3X5 mm-80 cm, Black Polytif
80 Black ● 101028485 Custom 200 Purchasing
Information 4-Way
Peg Assemblies
Requires separate
4-Way barbed, White Soft PE
Polytif 50 White ● 101041708 Custom 200 purchase of an online
3X5 mm-50 cm, Black Polytif
dripper.
4-Way barbed, White Soft PE
Polytif 60 White ● 101041749 Custom 200
3X5 mm-60 cm, Black Polytif
4-Way barbed, White Soft PE
Polytif 70 White ● 101041730 Custom 200
3X5 mm-70 cm, Black Polytif
4-Way barbed, White Soft PE
Polytif 80 White ● 101041732 Custom 200
3X5 mm-80 cm, Black Polytif
Dripper | Assemblies
Dripper Accessories Dripper | Accessories
Dripper Accessories 08
Image Description Item Number Order Min.
Status Qty.
To be
Plug - 2 mm, Violet (Supertif) 101003314 Standard
advised
To be
Plug - 2,8 mm, Red (Katif) 101003311 Standard
advised
To be
Plug - 6 mm, Black 101003312 Standard
advised
To be
Plug - 8 mm, Black 101003313 Standard
advised
Dripper | Accessories
Dripper | Accessories
Dripper Accessories
Rivulis
I r r i ga ti on
Dripper Accessories 08
Note: Rivulis drippers assemblies solutions are recommended with: Micro tube PE Soft 3x5 mm, white
color for micro tube and pegs, barbed multi-port outlet connectors, and flow regulated pegs.
Dripper | Accessories
Jet Sprays Tornado Ray Jet Spray Jet Spray | Tornado Ray
Tornado - Tornado -
5 mm Thread Male Conic
Technical Data
Tornado Ray Jet - 12 Streams, Full Circle 11
Tornado Ray Jet
Image Streams Outlet Type Pattern Flow Nozzle Item Order Min. Operating pressure
Rate Color Number Status Qty. range: 1,5 to 3,0 bar
(l/h Pressure (for flow rate
calculation): 1,5 bar
12 5 mm Thread 360° 25 Black ● 201000079 Standard 500
Filtration
12 5 mm Thread 360° 34 Blue ● 201000080 Standard 500 requirements:
12 5 mm Thread 360° 55 Green ● 201000081 Standard 500 l/h Micron Mesh
1 12 5 mm Thread 360° 70 Red ● 201000082 Standard 500 ≤40 130 120
>40- 200 80
70
12 Male Conic 360° 25 Black ● 201000077 Standard 500
>70 250 60
12 Male Conic 360° 34 Blue ● 101003355 Standard 500
Purchasing
12 Male Conic 360° 55 Green ● 201000078 Standard 500
Information
12 Male Conic 360° 70 Red ● 101003356 Standard 500 Tornado Ray Jet
Box: 38,5 X 38 X 27
cm
Box Quantity: 5000
(l/h
(l/h
Technical Data
Tornado Ray Jet
Operating pressure
range: 1,5 to 3,0 bar
Pressure (for flow rate
calculation): 1,5 bar
Filtration
requirements:
l/h Micron Mesh
≤40 130 120
>40- 200 80
70
>70 250 60
Purchasing
Information
Tornado Ray Jet
Box: 38,5 X 38 X 27
cm
Box Quantity: 5000
(l/h) (cm)
(l/h) (cm)
Technical Data
JFR Flow Regulated Jet Stream Spray 12
JFR
Image Fitting Pattern Flow Nozzle Item Number Order Min. Operating pressure
Rate Color Status Qty. range: 1,5 to 3,5 bar
(l/h) Filtration
requirements:
2 3/8" Thread 360° 23 Black ● 101003502 Custom 500
l/h Micron Mesh
3/8" Thread 360° 30 Blue ● 101003503 Custom 500
≤40 130 120
3/8" Thread 360° 41 D. Blue ● 201000157 Custom 500
>40- 200 80
3/8" Thread 360° 53 Green ● 201000156 Custom 500 70
(l/h) (cm)
2. Rondo
2 3/8"Thread 51 Green ● Blue ● 101011803 Custom 500
3/8” Thread
3/8"Thread 64 Green ● Dk. Blue ● Consult Custom
Sprinklers | Rondo
Sprinklers | Rondo
3/8"Thread 132 Black ● White ● Anti-Ant 101003413 Custom 500 Pressure (for flow rate
calculation): 2,0 bar
3/8"Thread 174 Black ● Violet ● Anti-Ant 101003423 Custom 500
Filtration requirements:
3/8"Thread 205 Black ● Yellow ● Anti-Ant 201000134 Custom 500
l/h Micron Mesh
≤40 130 120
5 mm Thread 39 Black ● Black ● Anti-Ant 201000135 Custom 500 >40-70 200 80
5 mm Thread 51 Black ● Blue ● Anti-Ant 101003426 Custom 500 >70 250 60
5 mm Thread 64 Black ● Dk. Blue ● Anti-Ant 101003430 Custom 500 Purchasing
5 mm Thread 75 Black ● Green ● Anti-Ant 201000130 Custom 500 Information Rondo
5 mm Thread 102 Black ● Red ● Anti-Ant 101003429 Custom 500
Micro Sprinkler
Box: 49X35,5X35,5 cm
Qty per box: 2 000
3/8" Thread 39 Black ● Black ● 60 Hammer Anti-Ant 101003543 Custom 200 3. Rondo
3/8" Thread 51 Black ● Blue ● 60 Hammer Anti-Ant 101003527 Custom 250 Assembly
Anti-Ant Cup,
3 3/8" Thread 75 Black ● Green ● 60 Hammer Anti-Ant 101003544 Custom 200 Super Hammer
Stake
Sprinklers | Rondo
Sprinklers | Rondo RFR
Conic Fit 102 Green ● Red ● 35 Weight, Anti-Leak 101029088 Custom 250
2. Rondo
Inverted
Assembly
3/8" Thread 41 Grey ● D. Blue ● Anti-Ant 101003445 Custom 500 Technical Data
3/8" Thread 53 Grey ● Green ● Anti-Ant 201000147 Custom 500 RFR Micro Sprinkler
3/8" Thread 70 Grey ● Red ● Anti-Ant 201000149 Custom 500 Operating pressure
range: 1,5 to 3,5 bar
3/8" Thread 95 Grey ● White ● Anti-Ant 101003446 Custom 500
Filtration requirements:
l/h Micron Mesh
≤40 130 120
>40-70 200 80
>70 250 60
3/8" Thread 53 Grey ● Green ● 60 Cantal Anti-Ant 101041693 Custom 250 2. RFR
Assembly
3/8" Thread 70 Grey ● Red ● 60 Cantal Anti-Ant 101029205 Custom 250 Anti-Ant,
3/8" Thread 95 Grey ● White ● 60 Cantal Anti-Ant 101029204 Custom 250 Cantal Stake
Standard/Flow Regulated
The Rivulis Irrigation S2000 Micro Sprinklers and S2000 Flow Regulated
Micro Sprinklers are ideal choices for a wide range of applications
including short-term crops such as vegetables and long-term crops such
as orchards.
Built to last, the S2000 Micro Sprinkler lines incorporate solid bridges,
built-in anti-insect protection, and a wear resistance design. In addition to
the standard features, the S2000 Micro Sprinkler line can be configured
with add-on features like the spinner with integral range limiter for a
smaller wetting diameter around young trees. The S2000 Flow Regulated
Micro Sprinkler has the added feature of flow regulation extending the use
of the sprinklers in applications with sloping fields or long lateral runs.
Sprinklers | S2000
Sprinklers | S2000
2 Black ● Green ● 75 1,4 Range Limiter 101028810 Custom 250 Technical Data
Black ● Red ● 97 1,4 Range Limiter 101042271 Custom 250 S2000 Micro
Black ● White ● 125 2,0 Range Limiter 101028811 Custom 250
Sprinkler
Operating Pressure
Range:1,5-2,5 bar
D. Blue ● Purple ● 170 9,5 101028815 Custom 250 Nominal pressure: 2,0
D. Blue ● Yellow ● 205 10,0 101028816 Custom 250 bar
Filtration requirements:
D. Blue ● Brown ● 260 10,0 101042213 Custom 250
l/h Microns Mesh
D. Blue ● Orange ● 300 10,5 101028817 Custom 250
All 200 80
Purchasing
Information
S2000 Micro
Sprinkler
Quantities
Bag: 250
Box: 1500
Box Dimensions:
L490 x W355 x H355
Sprinklers | S2000
Sprinklers | S2000
1 Grey ● Green ● 53 6,0 Flow Regulated 101028819 Custom 250 1. S2000 Flow
Grey ● Red ● 74 7,0 Flow Regulated 101042222 Custom 250 Regulated Micro
Sprinkler
Grey ● White ● 95 7,5 Flow Regulated 101028820 Custom 250 3/8" / Female
Conic
Grey ● Black ● 24 1,0-1,5 Flow Regulated, Range Limiter 101028821 Custom 250
Grey ● Blue ● 31 1,0-1,5 Flow Regulated, Range Limiter 101042546 Custom 250
Grey ● Green ● 53 1,0-1,5 Flow Regulated, Range Limiter 101028822 Custom 250
Grey ● Red ● 74 1,0-1,5 Flow Regulated, Range Limiter 101042548 Custom 250
Grey ● White ● 95 1,0-1,5 Flow Regulated, Range Limiter 101028823 Custom 250
Sprinklers | S2000
Sprinklers | S2000
Sprinklers | S2000
Super XL Sprinkler Sprinklers | Super XL
Super XL Sprinkler
Rivulis
I r r i ga ti on
Super XL Sprinkler 13
Image Fitting Flow Nozzle Rotor Item Order Min.
Rate Number Status Qty.
(l/h)
3/8" Thread 191 Violet ● Black w/Blue Cover ● ● 101003649 Custom 250
1. Super XL
3/8" Thread 235 Yellow ● Black w/Blue Cover ● ● 101003653 Custom 250 3/8" Thread
3/8" Thread 290 Brown ● Brown w/ Green Cover ● ● 101003650 Custom 250
1 3/8" Thread 341 Orange ● Brown w/ Green Cover ● ● 101003651 Custom 250
2 1/2" Thread 191 Violet ● Black w/Blue Cover ● ● 101003655 Standard 250
2. Super XL
1/2" Thread 235 Yellow ● Black w/Blue Cover ● ● 101003656 Custom 250 1/2" Thread
Technical Data
1/2" Thread 290 Brown ● Brown w/ Green Cover ● ● 101003657 Standard 250 Super XL Sprinkler
1/2" Thread 341 Orange ● Brown w/ Green Cover ● ● 101003658 Standard 250 Operating pressure
range: 2,5 to 3,5 bar
Pressure (for flow rate
calculation): 2,5 bar
Filtration requirements:
l/h Micron Mesh
All 200 80
Super XL Assemblies 15
Image Description Item Order Min.
Number Status Qty.
Sprinklers | Super XL
S5000 Plastic Impact Sprinkler Sprinklers | S5000
Applications:
Low angle: Orchards (under tree irrigation)
and shade houses
High angle: Open fields (overhead irrigation)
and germination of vegetables, flowers, and
nursery crop S5000 Plastic S5000 Plastic
Impact Sprinkler - Impact Sprinkler -
Low Angle/ 1/2" High Angle/ 1/2”
Thread Base Thread Base
Low Angle 9 Purple ● 375 17,0 1/2” BSP/NPT 101038303 Standard 200 1. S5000 Plastic
Impact Sprinkler
Low Angle 9 Orange ● 485 17,5 1/2” BSP/NPT 101038311 Custom 200 Low Angle
Low Angle 9 Green ● 635 16,5 1/2” BSP/NPT 101038312 Custom 200
Technical Data
S5000 Plastic Impact
Low Angle 12 Purple ● 408 17,0 1/2” BSP/NPT 101038314 Standard 200 Sprinkler
1 Low Angle 12 Orange ● 507 18,0 1/2” BSP/NPT 101038315 Custom 200 Fitting: 1/2” BSP/NPT
Low Angle 12 Green ● 637 17,5 1/2” BSP/NPT 101038316 Custom 200 Operating pressure
range: 2,0 to 4,0 bar
Pressure (for flow rate
Low Angle 14 Purple ● 379 17,0 1/2” BSP/NPT 101038317 Custom 200 calculation): 2,5 bar
Low Angle 14 Orange ● 488 17,5 1/2” BSP/NPT 101038318 Custom 200 Filtration requirements:
Low Angle 14 Green ● 629 18,5 1/2” BSP/NPT 101038319 Custom 200 l/h Micron Mesh
All 200 80
Note: All S5000 Plastic Impact Sprinklers have male threads.
Purchasing
Information
S5000 Plastic Impact
Sprinkler
Qty per 50
bag:
Qty per 200
box:
Sprinklers | S5000
Sprinklers | S5000
Technical Data
S5000 Plastic Impact Sprinkler - High Angle (1/2” BSP/NPT) 26
S5000 Plastic
Image Nozzle 1 (Fore) Nozzle 2 Flow Wet. Item Order Min. Impact Sprinkler
Rate Dia. Number Status Qty.
(Rear) Fitting: 1/2” BSP/MPT
Note: All S5000 Plastic Impact Sprinklers have male threads. Purchasing
Information
S5000 Plastic
Impact Sprinkler
Qty per bag: 50
Qty per box: 200
S5000 Nozzle - Low Angle 14 Purple ● 379 17,0 101038413 Standard Consult
4. S5000 Nozzle
S5000 Nozzle - Low Angle 14 Orange ● 488 18,0 101038414 Standard Consult
- High Angle -
S5000 Nozzle - Low Angle 14 Green ● 629 17,5 101038415 Standard Consult 24°, Orange
S5000 Nozzle - High Angle, Rear 24 Lt. Green ● 101038418 Standard Consult
1/2" Female impact sprinkler carrier for field stand 101038634 Standard Consult
Sprinklers | S5000
FLF Mist Spray Sprinklers | FLF
FLF Mist
Sprayer -
Single FLF - 2-Way FLF - 4-Way
Fogger 4-Way* Female Conic 5,40 Lt. Blue ● 101003664 Standard 500 Pressure (for flow 3,5 bar
rate calculation):
Fogger 4-Way* Female Conic 10,50 Dk. Blue ● 101009819 Standard 500
Required opening 3,5
pressure: bar
Sealing pressure: 1,4 bar
FLF Mist Spray 15 Filtration requirements:
Image Description Tube Item Number Order Min. Qty. l/h Micron Mesh
Status
All 100 150
(cm)
3. Assembly 4. Assembly
unit for for FLF
Single FLF (2-Way and
(1-way) 4-Way)
More references are available, please contact your Sales Representative
or Customer Service Representative for availability and price. Rivulis.com 5.14
Sprinklers | FLF
Rondo Mist Spray Sprinklers | Rondo Mist
1 Female Conic 61 Blue ● Mist Spray 101022981 Custom 500 1. Rondo Mist
Spray
Blue Nozzle
Female Conic 47 Black ● 35 Anti-Leak Valve HP, Weight 101003611 Custom 250
2 Female Conic 61 Blue ● 35 Anti-Leak Valve HP, Weight 101029220 Custom 250
2. Rondo
Hanging
Assembly
(Inverted)
Mist Spray
Technical Data
Rondo Mist
Operating pressure
range: 3,0 to 4,0 bar
Pressure (for flow rate
calculation): 3,0 bar
Filtration requirements:
l/h Micron Mesh
≤40 130 120
>40-70 200 80
>70 300 50
Purchasing
Information
Rondo Mist
Box: 49X35,5 X 35,5 cm
Qty per box: 2 000
Weight: 12 Kg
Sprinkler Accessories 15
Image Description Qty Item Number Order Min. Qty.
Status
(box)
Sprinklers | Accessories
Sprinklers | Accessories
Sprinkler Accessories
Rivulis
I r r i ga ti on
Sprinkler Accessories 15
Image Description Item Order Min. Qty.
Number Status
Sprinklers | Accessories
Sprinklers | Accessories
3 4x7 mm PVC 35 Blue Start Connector Female Conic 101029341 Custom 500
4 4x7 mm PVC 35 Blue Start Connector Male Conic 101029340 Custom 500
7 4x7 mm PVC w/ Weight 35 Blue Start Connector Female Conic 101022996 Custom 500
8 4x7 mm PVC w/ Weight 35 Blue Start Connector Male Conic 201000260 Custom 500
Technical Data
Tubing Assemblies
4 x 7 PE Assemblies -
Limited to 130 l/h
5 x 8 PE Assemblies -
Limited to 175 l/h
Note: for flow rates
above 200 l/h use 9 x 12
Assemblies
Connector
(B)
Connector
(A) 1. 2. 3. 4. 5. 6. 7. 8.
Sprinklers | Accessories
Sprinklers | Accessories
Sprinkler Accessories
Rivulis
I r r i ga ti on
Sprinklers | Accessories
Sprinklers | Accessories
1. Nozzle
Nozzle - 3/8" Male Thread/Female Conic 64 D. Blue ● 201000770 Standard 500
(3/8" Thread)
1 Nozzle - 3/8" Male Thread/Female Conic 75 Green ● 201000160 Standard 500
Nozzle - 3/8" Male Thread/Female Conic 102 Red ● 201000161 Standard 500
Nozzle - 3/8" Male Thread/Female Conic 132 White ● 201000162 Standard 500
Nozzle - 3/8" Male Thread/Female Conic 174 Purple ● 201000163 Standard 500
Nozzle - 3/8" Male Thread/Female Conic 205 Yellow ● 201000164 Standard 500
Nozzle - 3/8" Male Thread/Female Conic 254 Brown ● 201000771 Standard 500
Nozzle - 3/8" Male Thread/Female Conic 298 Orange ● 201000165 Standard 500
Nozzle (Flow Regulated) - 3/8" Male Thread 23 Black ● 201000785 Standard 500
Nozzle (Flow Regulated) - 3/8" Male Thread 30 Blue ● 201000190 Standard 500
Nozzle (Flow Regulated) - 3/8" Male Thread 41 D. Blue ● 201000786 Standard 500
2. Nozzle (Flow
Regulated)
2 Nozzle (Flow Regulated) - 3/8" Male Thread 53 Green ● 201000191 Standard 500
(3/8" Thread)
Nozzle (Flow Regulated) - 3/8" Male Thread 70 Red ● 201000192 Standard 500
Nozzle (Flow Regulated) - 3/8" Male Thread 95 White ● 201000193 Standard 500
Sprinklers | Accessories
Sprinklers | Accessories
Sprinkler Accessories
Rivulis
I r r i ga ti on
Ultra Nozzle - Female Conic 51 Blue ● 201000922 Standard 500 1. Ultra Nozzle
(Female Conic)
Ultra Nozzle - Female Conic 64 Dk. Blue ● 201000167 Standard 500
Sprinklers | Accessories
Sprinklers | Accessories
Rondo Parts 13
Image Description Item Order Min.
Number Status Qty.
8. 201000179 9. 201000183 10. 201000182 11. 201000181 12. 201000180 13. 201000293 14. 201000184 15. 201000252
Sprinklers | Accessories
Sprinklers | Accessories
Sprinkler Accessories
Rivulis
I r r i ga ti on
Meteor Adapters 15
Image Description Color Mat. Inlet Outlet Con. Connects Applications Item Order Min.
Con. with: Number Status Qty.
Meteor 44 Black ● PP Barb 3/8" THF 4x7 mm Rondo 3/8", 201000822 Standard 500
Tubing Jet+, RFR, JFR,
Super XL
Meteor 50 Brown ● Acetal Barb 3/8” THF 4x7 mm Rondo, Jet+ 201012725 Standard 500
Tubing
Meteor 54 Brown ● Acetal Barb 3/8" THF 4x7 mm, 5x8 Rondo 3/8", 201000865 Standard 500
mm Tubing Jet+, RFR, JFR,
Super XL
Meteor 46 Black ● PP Barb 1/2" THM/ 4x7 mm Tornado 201000200 Standard 500
3/8"THF Take-Apart
Meteor 46 Black ● PP Barb 1/2" THM/ 4x7 mm Tornado 201000828 Custom 500
- 1,5 bar 3/8"THF Take-Apart
Regulation
Meteor 47 Black ● PP Barb 3/8" THF 4x7 mm, 5x8 Rondo 3/8", 201000866 Standard 500
mm Jet+, RFR, JFR
Meteor 47 Black ● PP Barb 3/8" THF 4x7 mm, 5x8 Rondo 3/8", 201000926 Custom 500
- 2,0 bar mm Jet+
Regulation
Meteor 47 Black ● PP Barb 3/8" THF 4x7 mm, 5x8 Rondo 3/8", 201003455 Custom 500
- 2,5 bar mm Jet+
Regulation
Sprinklers | Accessories
Sprinklers | Accessories
Meteor Adapters 15
Image Description Color Mat. Inlet Outlet Con. Connects Applications Item Order Min.
Con. with: Number Status Qty.
Meteor 67 Black ● PP 1/2" Male 3/8" THF 1/2" Female Rondo, Jet+, 201012728 Standard 500
Thread Super XL
Meteor 67 Black ● PP 1/2" Male 3/8" THF 1/2" Female Rondo, Jet+, 201012734 Custom 500
- 2,0 bar Thread Super XL
Regulation
Meteor 67 Black ● PP 1/2" Male 3/8" THF 1/2" Female Rondo, Jet+, 201003457 Custom 500
- 2,5 bar Thread Super XL
Regulation
Sprinklers | Accessories
Hose and TubingPro-Flat Layflat Hose and Tubing | Layflat
- Premium resins
- Portable
- Reduced elongation and rotation
- Applications include transfer lines, sub-main lines, and discharge line
2 - Layflat 3 - Layflat
Standard High Pressure
(Blue)
(Red)
Filtration
Rivulis
I r r i ga ti on
F1000 Hydrocyclone F2000 Media Filters F3100 Metal Screen F3200 Metal Screen F3200 Metal Screen F3300 Metal Screen
Sand Separator Filter Manual Filter with Hydraulic Filter with Hydraulic Filter with Electric
Operation Operation (Angle) Operation
F3300 Metal Screen F3400 Metal Screen F3400 Metal Screen F3400 Metal Screen F9000 Gravity Filter
Filter with Brushes Filter with Internal Filter with Brushes Filter with
and Electric Flushing Mechanism and Internal Continuous
Operation Flushing Mechanism Circulation
Filtration Rivulis
I r r i g atio n
Product Information
All models include collector tank
All models include legs
All models include rubber, protective cone
Filtration | F1000
F2000 Media Filter Filtration | F2000
F2000 Media Filters (gravel or sand) are the most efficient type of
filtration of water heavily contaminated with algae, organic matter and
other impurities found in open reservoirs, canals and recycled water
systems. Filtration occurs when water passes through the open spaces
and between sand particles, trapping the solid particles. The F2000
Media Filters use a unique design of two chambers that are divided by
a welded reinforced steel plate. The upper chamber contains the media
sand and contaminants while the lower chamber accepts the clean
water that has been filtered and then passes out to the field. The plate
that separates the two chambers is covered by precision conical
diffusers. When operated correctly during a backflush the diffusers
disperse the water uniformly avoiding the occurrence of funneling,
channeling or caking of the media bed.
Product Information
Double chamber
Precision conical diffusers/collectors
3 service ports for maintenance
F2000 Media Filter 4 48 100 VIC 101046369 Custom 1 Maximum 8,0 bar
working
pressure:
Maximum 10,0 bar
pressure:
All Media Filters are sold without media. For help with media recommendations contact Rivulis Irrigation Technical Representative.
Filtration | F2000
F3100 Metal Sceen Filter (Manual) Filtration | F3100
Product Information
Screen options: 130, 200, 400 micron
Filtration | F3100
Filtration | F3200
F3200 Metal Screen Filter - Hydraulic
F3200 Metal Screen Filter with Hydraulic F3200 Metal Screen Filter with Hydraulic
Operation Operation Parallel
Angle (compact)
Filtration | F3200
Filtration | F3200
Filtration | F3200
F3400 Metal Screen Filter - Continuous Filtration | F3400 Continuous
F3400 Metal Screen Filters with Continuous Circulation are the ideal
choice for applications without electricity. The F3400 Filters utilizes
centrifugal movement of the water to keep the screen clean during the
irrigation process. The sediments collect in the lower chamber to be
purged by the control valve. As a result there is no increase in head
loss during operation. The flushing of the collecting chamber is done
automatically by a flushing controller during the irrigation process. The
3400 Metal Screen Filter with Continuous Circulation is used as a
primary filter for water containing minimum quantity of suspended
particles and from sources with accurate working pressure.
The F6100 Plastic Screen Filter features a large filtration screen that increases
Product Information
the flow rate capacity and extends the time between flushing. The F6100
Screen Area:
Plastic Screen Filters are used as primary filters in small irrigation systems Max. Operating Filter
Size
and as back-up filters in field zone applications. The Screen of the F6100 Pressure Area
Plastic Screen Filter has a molded plastic rib cage for superior strength and (inch) (bar) (cm²)
depending on size it is outfitted with either a twin layer stainless steel weave- 3/4” 10 73
wire or polyamide screen. Both the design and materials used in the F6100 1” 10 113
allow for easy maintenance and years of high performance. 1 1/2” 10 291
2” 8 560
The line of F6100 Plastic Screen Filters are 2” 10 770
available in In-Line or Angled body styles, inlet/ 3” 8 770
outlet sizes from 3/4”-3”, and all filters feature a 2” L, 3” 10 1150
1¼” Drainage outlet with a plug. In addition, the Screen Options/ Colors
2”-3” filters feature a 11/4” drainage outlet with Rating Color
a plug and a stainless steel clamp for easy (micron)
maintenance and can be equipped with an 100 Orange
optional clogging meter. The filters can be 200 Grey
ordered with threaded or grooved connections 400 Yellow
Rivulis Irrigation F6100
and with one or two inlets. Plastic Screen Filter (3/4”)
Filtration | F6100
Filtration | F7000
F7000 Plastic Disc Filter
The F7000 Plastic Disc Filter is used as a primary filter for Product Information
small irrigation systems and as a back-up filter for field Screen Area:
zones. This filter can stop or retain large amount of solids Size Max. Operating Filter
Pressure Area
from the water due to the depth feature of the disc element
and the size of element. In addition, the filters utilize a flow
(inch) (bar) (cm²)
deflecting plate that circulates water inside the filter and forces
1” 10 204
particles away from the disc elements and down to the bottom
1 1/2” 8 281
of the filter ready to be flushed out. All of these features
2” 10 925
contribute to improve filter efficiency and increase time 2” 10 1360
between flushing. 2” L, 3” 10 2090
The F7000 Plastic Screen Filters have a nylon body, reinforced Screen Options/ Colors
Rating Color
with fiberglass, and are equipped with filtration elements stacked with
(micron)
polypropylene discs. The F6100 Plastic Disc Filters are available in
100 Orange
several filtration rates and connection types, including both threaded
and grooved. The 2” and 3” filters utilize a user-friendly, stainless steel 130 Red
clamp for easy maintenance. And because the F7000 Plastic Disc 200 Yellow
Filters can be flushed without tools, the filters are easy to maintain
and operate for years.
F7000 Plastic Disc Filter 10 In-Line 1 25 BSP 130 5,5 101044299 Standard 1
Purchasing Information
F7000 Plastic Disc Filter
Units per Carton:
1” 20
F7000 Plastic Screen Filter 1 1/2” 12
- In-Line/Angled, 2”
2”-3” 1
Filtration | F7000
Fertilization Fertilizer Tanks Fertilization | Filter Tanks
Fertilizer Tanks
Rivulis
I r r i ga ti on
Fertilizer Tanks 22
Description Body Style Inlet/Outlet Tank Volume Item Order Min.
Size Number Status Qty.
(inch) (mm) (l)
Category Air & Vacuum Release Valve Continuous Air Valve Combination Air Valves
Sizes ¾”, 1”, 2”, 3” ½”, ¾”, 1” ½”, ¾”, 1”, and 2”
Application Discharges air during the system start Releases air during system operation Provides air and vacuum release during
up and introduces air during shutdown under pressure, helping to reduce head system startup and shutdown, and
to prevent pipes and tubes from loss and decrease flow from trapped air continuous air release during system
collapsing. in water. operation.
Location On the downstream side of an isolating On long continuous lines every 150-250 On long constant sloping pipeline
valve and on sub mains. meters. segments.
On main lines where design specifies an On all gentle peaks in the line where At peaks along the pipeline and at
air release/vacuum breaker. there is no problem of vacuum peaks relative to hydraulic gradient.
On fertigation check valves. conditions. At the end of the lines.
On pump filter where air release is Before water meters.
needed. On strainers and filters.
1. Air & Vacuum 2. Air & Vacuum 3. Continuous Air 4. Combination Air
Release 3/4” - 1” Release 2” Valve 3/4” Valve 1/2”
Air Valves 27
Image Description Size Connection Type Item Order Min.
Number Status Qty.
Technical Data
Air & Vacuum Release 3/4 BSP Male 101045527 Standard 1 Air Valves
1 Air & Vacuum Release 1 BSP Male 101045529 Standard 1 Minimum Pressure:
2 Air & Vacuum Release 2 BSP Female 101045531 Standard 1 Air & Vacuum 0,01 bar
Release Valve
Continuous and 0,10 bar
3 Continuous Air Valve 1 BSP Male WT12512 Standard 1
Combination
1 Valves
4 Combination Air Valve 1/2 BSP Male WT12514 Custom 1 Maximum 10 bar
Pressure:
Combination Air Valve 3/4 BSP Male WT12516 Custom 1
V1000 Hydraulic Control Valve V2000 Hydraulic Control Valve V3000 Hydraulic Control Valve
Actuation: Manual / Electric Actuation: Manual/ Electric / Hydraulic Actuation: Manual/Electric / Hydraulic
Tubing and fittings: plastic Tubing and fittings: plastic Tubing and fittings: plastic (2”-8”), metal (6”-8”)
Pre-set pressure: 2/3- Way - 0,8 bar, 3-way - 2,5 Pre-set pressure: PR - 2,5 bar PR/PS - 4,0/2,0
Pre-set pressure: 3-way - 2,5 bar
bar bar, QR - 6,0 bar
End Connectors : Threaded (BSP) End connections: Accessories End connections: Threaded, grooved, flanged
Maximum Pressure Rating: 10 bar Maximum Pressure Rating: 10 bar Maximum Pressure Rating: 10 bar *
Operating Pressure Range: 0,7-10 bar Operating Pressure Range: 0,3-10 bar Operating Pressure Range: 0,5-10 bar*
Control flow in small agricultural blocks Controls medium to large agricultural blocks Irrigation system head control
Greenhouse and tunnel irrigation systems Control pressures for filters and pumps Field valve application
Residential and commercial landscape Quick relief valve for system protection Quick relief valve for system protection
The electric valve control circuit is internal (2-way Glass-filled Nylon Construction
Full bore seat
circuit) providing some significant benefits such as
2-Way internal or 3-Way external
no external tubes or accessories.
Valve | V1000
Valve | V1000
Manual
Manual
override
Selector
switch
V1000 Electric, Latch 1 In-Line 2W 9VDC Latch- 2 Leads BSP WT12214 Standard 1
V1000 Electric, Latch 1½ In-Line 2W 9VDC Latch- 2 Leads BSP WT12216 Standard 1
V1000 Electric, Latch 2 Angle 2W 9VDC Latch- 2 Leads BSP WT12220 Custom 1
V1000 Electric, Latch 2 In-Line 2W 9VDC Latch- 2 Leads BSP WT12218 Custom 1
V1000 Pressure Reducing, Manual 1½ In-Line 3W 0,8-6,5 Manual Selector BSP WT12223 Custom 1
V1000 Pressure Reducing, Manual 2 In-Line 3W 0,8-6,5 Manual Selector BSP WT12225 Custom 1
V1000 Pressure Reducing ,Electric, NC 2 In-Line 3W 0,8-6,5 24V AC BSP WT12231 Standard 1
V1000 Pressure Reducing ,Electric, NC 2 In-Line 2/3W 0,8-6,5 24V AC BSP WT13366 Standard 1
Valve | V1000
V2000 Hydraulic Control Valves Valve | V1000
The Rivulis Irrigation V2000 Hydaulic Control Valves are designed to meet the Product Information
needs of multiple applications in your irrigation system, including simple control Straight-thru flow design
(on/off), pressure reducing, and quick relief. The valve operates by responding to Wide operating range
pressure and flow changes with a diaphragm piston assembly. The body design Various end connections
has been optimized to maximize flow capacity, reduce pressure loss, and resist Nyglass construction
cavitation. The V2000 will be the primary choice for agricultural irrigation Electric / Hydraulic / Manual
applications requiring high flows at low pressures and low flows at high pressures. Manual throttling up to 3 inch
Because the valves are made with glass-filled nylon, they resist damage from Manual override switch
included with electric valves.
chemicals and have long term durability.
The V2000 Hydraulic Control Valve line is offered with a wide range of options
including size, end connections (threaded, flanged, PVC glued, or grooved),
actuation method (electric, hydraulic), and pilots and springs. Accessories and
parts can be ordered to build customized valves.
On/Off ● ● ● ● ● ● ●
Pressure Reducing ● ● ● ● ● ● ● ● ●
Quick Relief ● ●
Valve | V2000
Valve | V2000
V2000 Pressure Reducing, Manual 2L Plastic 2/3W 0,5 - 3,0 Manual Selector BSP WT12073 Standard 1
V2000 Pressure Reducing, Manual 3 Plastic 2/3W 0,5 - 3,0 Manual Selector BSP WT12075 Standard 1
V2000 Pressure Reducing, Manual 4 Plastic 2/3W 0,5 - 3,0 Manual Selector Flange WT12082 Standard 1
Standard Pressure Spring
V2000 Pressure Reducing, Manual 2L Plastic 3W 0,8-6,5 Manual Selector BSP WT12057 Standard 1
Valve | V2000
Valve | V2000
V2000 Pressure Reducing, Electric, NC 2L Plastic 3W 0,8-6,5 24V AC BSP WT12089 Custom 1
V2000 Pressure Reducing, Electric, NC 3 Plastic 3W 0,8-6,5 24V AC BSP WT12091 Custom 1
Valve | V2000
V3000 Hydraulic Control Valves Valve | V3000
The V3000 Hydraulic Control Valves are constructed with several key features that Product Information
provide long term durability under a variety of tough applications. And the valves Metal construction
are designed to to operate under high pressure and high flow rates. The Electric / Hydraulic / Manual
diaphragm piston assembly uses an innovative method to create a seal against the •Wide operating range
body of the valve and is carefully balanced and supported to avoid distortion; 2” – 10” valve sizes
resulting in long-life and controlled actuation even under harsh conditions. The Various end connections
V3000 are made of metal bodies and covers and assemble with just Solid one piece diaphragm
piston assembly
4 bolts, reducing the time it takes for maintenance.
Manual override switch
included with electric valves.
The V3000 Hydraulic Valves are offered in the four
different configurations of basic, pressure reducing,
pressure reducing and sustaining, and quick relief.
These valves are offered in sizes from 2” to 10”
and with a variety of pilot/springs and connections
type.
V3000 - Angle
On/Off ● ● ● ● ●
Pressure Reducing ● ● ● ● ● ● ● ●
Quick Relief ● ●
Valve | V3000
Valve | V3000
Valve | V3000
Hydraulic Valve Accessories Valve | Valve Accessories
Finger Filter Finger Filter - 1/4" V1000, V2000 Plastic 1/4"M x 1/8"F WT14003 Standard 1
Finger Filter Finger Filter Short - 1/4" V1000, V2000 Plastic 1/4"M x 1/8"F WT14004 Standard 1
Finger Filter Finger Filter - 1/4" V1000, V2000 Stainless Steel 1/4"M x 1/4"M WT14005 Standard 1
Hydraulic Relay Hydraulic Relay -Up to 1,0 (Silver) 3W Plastic 1/8 2 Consult Standard 1
Hydraulic Relay Hydraulic Relay -Up to 2,0 (Green) 3W Plastic 1/8 2 Consult Standard 1
Pilot Pilot - Multi Purpose Mini Plastic 2-4 3W 0,8-6,5 WT12558 Standard 1
Pilot Pilot - Pressure Reducer Mini Plastic 2-4 2/3W 0,5-3,0 WT12559 Standard 1
Pilot Pilot - Quick Relief Mini, MT Brass W/Plastic Cover 2-4 2W 1,0-16,0 WT12561 Custom 1
WT12574 - Solenoid AC - 24v AC WT12576 - Solenoid AC - 24v AC WT12918 - Solenoid DC Latch - 12-50v DC
Installation Tools
Rivulis
I r r i ga ti on
7,5 mm Cutting blade (DR-7.5) For start connectors (12-20 mm) 101013496 Standard 1
7,5 mm Simple manual punch For start connectors (12-20 mm) & 9mm
101003345 Standard 1
(R4-K 7.5) flat barb plunger
Tools | Installation
Tools | Installation
400 Barb Inserter For start connectors B400 into Thin Wall PE tubing 101001107 Standard 1
400 Barb Inserter For start connectors B400 into Thin Wall PE tubing 101001109 Custom 1
700 Barb Inserter For start connectors B700 into Thin Wall PE tubing 101001111 Custom 1
700 Barb Inserter For start connectors B700 into Thin Wall PE tubing 101001112 Custom 1
Tools | Installation
Tools | Installation
Installation Tools
Rivulis
I r r i ga ti on
Tools | Installation
Tools | Installation
14 mm Layflat cutter For cutting holes in layflat pipes for start connectors 101001118
16 mm Layflat cutter For cutting holes in layflat pipes for start connectors 101001119
19 mm Layflat cutter For cutting holes in layflat pipes for start connectors 101001120
Pro- Grip Layflat Spanner Wrench For tightening layflat start connectors 101001121
Pro-Grip Layflat Tee Hex Wrench Used with Spanner wrench for tightening layflat start
101001122
300 Series connectors
Pro-Grip Layflat Tee Hex Wrench Hex Wrench uses with Spanner wrench for tightening
101001123
500 Series layflat start connectors
Tools | Installation
Rivulis Irrigation
Rivulis Irrigation is one of the largest irrigation companies in the world.
Providing precision drip and micro irrigation products and services to growers
in every corner of the globe. And we’re reaching these growers with industry
leading irrigation brands like T-Tape, Supertif, and Rondo. All of these products
have been designed to deliver the right amount of water, at the right time.
Helping growers efficiently and effectively use their resources.
This literature has been compiled for worldwide circulation and the descriptions, photos, and information are for
general purpose use only. Please consult with an irrigation specialist and technical specifications for proper use of
Rivulis Irrigation products. Because some products are not available in all regions, please contact your local dealer
for details. Rivulis Irrigation reserves the right to change specifications and the design of all products without
notice. Every effort has been used to ensure that product information, including data sheets, schematics, manuals
and brochures are correct. However information should be verified before making any decisions based on this
information.
RIV_PC_EMEAgeneral_R2_EN_W14_0776 Rivulis.com