Академический Документы
Профессиональный Документы
Культура Документы
Manufacturing
Qualifications
2019 Catalogue
AM Qualifications Catalogue 2
Contents
Who is EWF?������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 4
EWF System�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5
EWF AM Qualifications������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6
Collaborating partners��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������26
AM Qualifications Catalogue 3
Who is EWF?
The European Federation for Welding, Joining and Cutting (EWF) is an
In 1992, member states of the European Union (EU) where welding courses
the European Federation for Welding, Joining and Cutting (EWF). Since
harmonised system for training, qualification and certification of welding personnel, taking a leading
role in innovation in learning methodologies. By using a single syllabus for each level of the training
courses and a harmonised system for examinations, the same qualification can be awarded in any
country. EWF is also responsible for the Certification System of Companies using welding in Quality,
Currently, EWF has 28 European member countries and since 2000, when its Qualification System was
licenced, there are more than 40 ANBs (Authorised Nominated Bodies) and over 650 ATBs (Authorised
Training Bodies) offered in 46 countries worldwide, in a network that includes 55 000 companies.
Beyond the most obvious benefits of the system’s harmonised approach to training, qualification and
certification, its adoption is also due to a result of its robust and transparent quality system, one that is
widely accepted by the ecosystem of individuals and organisations involved, from training institutions
to national certification bodies, companies, trainers and trainees, and which is the backbone for
assuring the same skills for any person holding an EWF diploma, awarded throughout the world.
EWF harmonised system provides companies with qualifications that focus on professional profiles
deemed crucial for their success, ready to be applied at local and global operations in areas such as
Industry 4.0 and one of its main pillars: Additive Manufacturing (AM).
AM Qualifications Catalogue 4
EWF System
In order to ensure the quality of its qualifications, EWF collects inputs from several sources, such as:
END-USERS
MARKET INDUSTRY
RESEARCH ORIGINAL EQUIPMENT
MANUFACTURERS
RESEARCH
TRAINING
ORGANISATIONS
UNIVERSITIES
ADDITIVE
STANDARDISATION
MANUFACTURING
BODIES
EXPERTS
Due to the engagement with various AM stakeholders and what they have to say about the
market needs and possible solutions for future workers and professionals already involved in the
manufacturing sector, EWF is able to build qualifications that are an added-value to the sector and to
the ones involved in the system: ANBs, ATBs, students and Industry.
AM Qualifications Catalogue 5
EWF AM Qualifications
EWF currently offers several Qualifications in Metal AM, three at the Operator level and four at
METAL AM OPERATORS
METAL AM COORDINATOR
• Post Processing
• Process selection
• Coordination Activities
• Metal AM integration
+
2 CUs to be selected from below:
• AM with steels feedstock (excluding SS)
ENGINEERS • AM with SS feedstock
• AM with Aluminium feedstock
• AM with Nickel feedstock
METAL AM PROCESS ENGINEERS
+ Process Specialisation
• Production of DED-Arc parts • Production of DED-LB parts • Production of PBF-LB parts
• Conformity of DED-Arc parts • Conformity of DED-LB parts • Conformity of PBF-LB parts
• Conformity of facilities • Conformity of facilities • Conformity of facilities
featuring DED-Arc featuring DED-LB featuring PBF-LB
AM Qualifications Catalogue 6
Modular and Cumulative System
The EWF AM Qualification System follows a modular structure, which enables a more flexible and tailor-
made training (Modular and Cumulative System), as well as an easier integration of International
EWF Qualifications are structured in Competence Units comprehending a set of knowledge and skills,
organized in learning outcomes, that can be individually taught, assessed and validated. Competence
Within EWF´s Qualifications, there are two types of Competence Units (CU):
• FUNCTIONAL COMPETENCE UNIT – A competence unit whose learning outcomes are directly linked
with at least one job function and in which the knowledge and skills achieved will be mobilized in
FUNCTIONAL
Learning Outcomes
Learning Outcomes
CROSS
directly CUTTING
linked with one job function since the knowledge and skills achieved will be mobilized in
CROSS CUTTING
Proficiency Skills Knowledge Contact Assessment
CU
Level Hours Criteria
Learning Outcomes
The EWF AM Qualification system has several advantages for its users:
• Current workforce and future trainees can benefit from a flexible and tailor-made training, both
• Trainees can progress more easily within the qualification systems by updating their knowledge
• Trainees can have enhanced opportunities for changing their career paths by getting qualified in
AM Qualifications Catalogue 7
• For educational systems, both Vocational Education and Training and Higher Education, this
represents an opportunity for addressing technical contents or emergent technologies which are
required by the sector, and therefore can be easily integrated at national level;
• For educational systems, it also represents an opportunity for designing individual learning
pathways that might be automatically recognized once it has been successfully completed;
AM Qualifications Catalogue 8
Metal Additive
Manufacturing
Qualification
Courses:
• European/International Powder Bed Fusion – Laser Beam Personnel
Qualifications: European / International Operator - E/IO PBF-LB
European / International Process Engineer - E/IPE PBF-LB
AM Qualifications Catalogue 9
Powder Bed Fusion - Laser Beam Personnel
(PBF-LB)
Qualification: European / International Operator (E/IO PBF-LB)
Introduction
Focusing on the practical skills and knowledge required to use and apply PBF-LB process on successful
completion of this qualification. You will be equipped to start or progress your career at national or
international level as operator, becoming an active member of this thriving, diverse and broad
community.
Target Group
This training program addresses professionals having no experience, knowledge, skills and
competences in the field of PBF-LB Additive Manufacturing or candidates having experience but willing
to upgrade their knowledge. This qualification addresses personnel who needs to independently
Description
PBF-LB Operators are the professionals with the specific knowledge, skills, autonomy and responsibility
and setting up, maintenance and repair. He/ She will be able to:
Benefits
• Up-to-date knowledge, skills and competences regarding the PBF-LB Additive Manufacturing
process
• Gaining a formal recognition of a qualification to act in the field of Metal Additive Manufacturing
AM Qualifications Catalogue 10
Powder Bed Fusion - Laser Beam Personnel
(PBF-LB)
Qualification: European / International Operator (E/IO PBF-LB)
Course Content
Recommended
#CU Title
Hours
15 PBF-LB Process 14
TOTAL: 84
*Optional CUs
Access Conditions
AM Qualifications Catalogue 11
Powder Bed Fusion - Laser Beam Personnel
(PBF-LB)
Qualification: European / International Process Engineer (E/IPE PBF-LB)
Introduction
Experience what it takes to become a top PBF-LB expert and become a manager in this high demanding
manufacturing. These qualifications will provide the competences for the technical management of
this technology.
Target Group
This training programme is ideal for Engineers willing to specialize and pursue a career in PBF-LB AM.
Description
PBF-LB Engineers are the professionals with the specific knowledge, skills, autonomy and responsibility
• Develop and execute PBF-LB plans including validation of design, implementation, pre and
post processing operations, assurance of parts conformity and identification of the causes
and the corrective actions of technical production problems;
• Coordinate the tasks distribution between the operators according to the workplan as well as
Benefits
• Up-to-date knowledge, skills and competences regarding the PBF-LB Additive Manufacturing
process
• Offering the full picture of PBF-LB Additive Manufacturing coordination, both from the
perspective of decision making and professional development
AM Qualifications Catalogue 12
Powder Bed Fusion - Laser Beam Personnel
(PBF-LB)
Qualification: European / International Process Engineer (E/IPE PBF-LB)
Course Content
Recommended
#CU Title
Hours
Access Conditions
** It is mandatory that 2 materials CUs shall be selected from the highlighted section.
AM Qualifications Catalogue 13
European/International Directed Energy
Deposition – Arc Personnel (DED-Arc)
Qualification: European / International Operator (E/IO DED-Arc)
Introduction
Become a driver of innovation in your company as DED-Arc is evolving fast and expertise is in high
demand. Definitely one qualification that will reap dividends throughout your career.
Target Group
This training course addresses candidates having no experience, knowledge, skills and competences
in the field of DED-Arc Additive Manufacturing or candidates having experience but willing to upgrade
Description
DED-Arc Operators are the professionals with the specific knowledge, skills, autonomy and
• Operate arc based DED machines for Additive Manufacturing, including, fitting and setting up,
• Verify arc related parameters and positioning in DED-Arc machines for Additive
Manufacturing
• Develop solutions on basic and specific problems related with DED-Arc machines and
Benefits
• Up-to-date knowledge, skills and competences regarding the DED-Arc Additive Manufacturing
process
AM Qualifications Catalogue 14
European/International Directed Energy
Deposition – Arc Personnel (DED-Arc)
Qualification: European / International Operator (E/IO DED-Arc)
Course Content
Recommended
#CU Title
Hours
01 DED-Arc Process 14
TOTAL: 84
Access Conditions
AM Qualifications Catalogue 15
European/International Directed Energy
Deposition – Arc Personnel (DED-Arc)
Qualification: European / International Process Engineer (E/IPE DED-Arc)
Introduction
Experience what it takes to become a top DED-Arc expert and become a manager in this high
significance in manufacturing. These qualifications will give you competences for the technical
Target Group
This training course is ideal for Engineers willing to specialize and pursue a career in DED-Arc.
Description
DED-Arc Engineers are the professionals with the specific knowledge, skills, autonomy and
• Develop and execute DED-Arc plans including validation of design, implementation, pre and
post processing operations, assurance of parts conformity and identification of the causes
and the corrective actions of technical production problems;
• Coordinate the tasks distribution between the operators according to the workplan as well as
Benefits
• Broad awareness of DED-Arc Additive Manufacturing coordination, both from the perspective
AM Qualifications Catalogue 16
European/International Directed Energy
Deposition – Arc Personnel (DED-Arc)
Qualification: European / International Process Engineer (E/IPE DED-Arc)
Course Content
Recommended
#CU Title
Hours
Access Conditions
** It is mandatory that 2 materials CUs shall be selected from the highlighted section.
AM Qualifications Catalogue 17
European/International Directed Energy
Deposition – Laser Beam Personnel (DED-LB)
Qualification: European / International Operator (E/IO DED-LB)
Introduction
Focused on the practical skills and knowledge required to use and apply DED-LB, this qualification will
provide you with the skills to become a top Operator in this thriving community.
Target Group
This training programme addresses candidates having no experience, knowledge, skills and
competences in the field of DED-LB Additive Manufacturing or candidates having experience but
Description
DED-LB Operators are the professionals with the specific knowledge, skills, autonomy and responsibility
• Operate Laser based DED machines for Additive Manufacturing, including, fitting and setting
• Verify Laser beam measurement and positioning in DED machines for Additive Manufacturing;
• Develop solutions on basic and specific problems related with Laser based DED machines
Benefits
Manufacturing process.
AM Qualifications Catalogue 18
European/International Directed Energy
Deposition – Laser Beam Personnel (DED-LB)
Qualification: European / International Operator (E/IO DED-LB)
Course Content
Recommended
#CU Title
Hours
08 DED-LB Process 14
TOTAL: 91
*Optional CUs
Access Conditions
AM Qualifications Catalogue 19
European/International Directed Energy
Deposition – Laser Beam Personnel (DED-LB)
Qualification: European / International Process Engineer (E/IPE DED-LB)
Introduction
Increase your professional skills by acquiring a professional qualification in a growing sector. This
Qualification is perfect for you if you want to have higher role and responsibilities at your organisation
in DED-LB.
Target Group
This training course is ideal for Engineers willing to specialize and pursue a career in DED-LB
Description
DED-LB Engineers are the professionals with the specific knowledge, skills, autonomy and responsibility
• Develop and execute DED-LB plans including validation of design, implementation, pre and
post processing operations, assurance of parts conformity and identification of the causes
• Coordinate the tasks distribution between the operators according to the workplan as well as
Benefits
Manufacturing process;
• Ability to understand technical requirements when solving complex problems and proving
• Full picture of DED-LB Additive Manufacturing coordination, both from the perspective of
AM Qualifications Catalogue 20
European/International Directed Energy
Deposition – Laser Beam Personnel (DED-LB)
Qualification: European / International Process Engineer (E/IPE DED-LB)
Course Content
Recommended
#CU Title
Hours
Access Conditions
** It is mandatory that 2 materials CUs shall be selected from the highlighted section.
AM Qualifications Catalogue 21
European/International Process Independent
Personnel
Qualification: European/International Metal Additive
Manufacturing Coordinator (E/I MAMC)
Introduction
Do you seek to upgrade your knowledge in AM technologies and a key asset in the process of decision
Target Group
This training course is ideal for Engineers willing to widen their knowledge in AM processes in general
Description
• Evaluate manufacturing suitability for customers' requests defining which processes are fit for
• Coordinate the tasks distribution between the operators according to the workplan as well as
Benefits
AM Qualifications Catalogue 22
European/International Process Independent
Personnel Personnel
Qualification: European/International Metal Additive
Manufacturing Coordinator (E/I MAMC)
Course Content
Recommended
#CU Title
Hours
01 DED-Arc Process 42
08 DED-LB Process 35
15 PBF-LB Process 35
22 PBF-EB Process 14
25 Post Processing 14
34 Process Selection 28
35 Metal AM Integration 21
36 Coordination Activities 7
TOTAL: 203
Access Conditions:
AM Qualifications Catalogue 23
Future Qualifications
EWF strives to provide high quality training courses, in-keeping with the market demand. Therefore,
future Metal AM qualifications are on their way to meet the industry’s expectations:
AM Qualifications Catalogue 24
How to become an Approved Training Body
for Additive Manufacturing (AM ATB)
A Training Center willing to become an AM ATB needs to undergo an approval process carried out
by an AM ANB. The Training Center is free to apply to one or more AM ANBs ensuring that the scope
for which it wants to be approved is within the scope of operation of the AM ANB(s) concerned.
This approval process is comprised of:
courses as described in EWF AM Guidelines. Therefore, the Training Center selects an AM ANB for a
After AM ANB’s assessment, the Training Center will see its application approved, proving it fulfils all
requirements for delivering training in accordance with EWF AM Guidelines, under a specific scope
• AM Qualification 100% in line with industrial requirements and in compliance with Standardization
rules;
qualification system.
AM Qualifications Catalogue 25
Collaborating partners
EWF benefited from the contribution of several relevant partners specialised in the Additive
Hence, EWF is grateful to all participating organisations, with special regard to the partners of
the following projects:
These qualification are supported by CECIMO, the European Association of the Machine Tool
AM Qualifications Catalogue 26
AM Qualifications Catalogue 27
Additive Manufacturing Qualifications
2019 Catalogue
Version 1.2
Email: ewf-iab@ewf.be
-----------------------------------------------------------------------------------
PORTUGAL