Академический Документы
Профессиональный Документы
Культура Документы
Google Cardboard IO 2015 Technical Specifications PDF
Google Cardboard IO 2015 Technical Specifications PDF
Table of Contents
1. Introduction��������������������������������������������������������������������������������������������������������������������� 2
2. Reference Information����������������������������������������������������������������������������������������������������� 2
2.1. Applicable Documents�������������������������������������������������������������������������������������������������� 2
3. Design Specifications������������������������������������������������������������������������������������������������������ 3
3.1. Lens Optical Design Specifications������������������������������������������������������������������������������� 3
3.2. Cardboard Mechanical Design Specifications���������������������������������������������������������������� 4
• 3.2.1. Corrugate Specifications���������������������������������������������������������������������������������������������4
• 3.2.2. Cardboard Mechanical Body Parts: “chassis”, “t-shirt” and “button”�����������������������5
• 3.2.3. Cardboard Sleeve Specifications��������������������������������������������������������������������������������5
• 3.2.4. Oleophobic Coating�����������������������������������������������������������������������������������������������������6
3.3. Button Specifications: Conductive Strip and Pillow������������������������������������������������������� 7
• 3.3.1. Conductive Strip Specifications����������������������������������������������������������������������������������7
• 3.3.2. Conductive Pillow Specifications�������������������������������������������������������������������������������7
3.4. Velcro Specifications���������������������������������������������������������������������������������������������������� 8
• 3.4.1. Oval Velcro Specifications������������������������������������������������������������������������������������������8
• 3.4.2. Round Velcro Specifications���������������������������������������������������������������������������������������9
3.5. Rubber Band Specifications������������������������������������������������������������������������������������������ 9
3.6. Artwork Specifications������������������������������������������������������������������������������������������������ 10
• 3.6.1. QR Viewer Profile Specifications������������������������������������������������������������������������������10
3.7. Storage Environmental Conditions ����������������������������������������������������������������������������� 11
4. Manufacturing & Production Verification����������������������������������������������������������������������� 11
4.1. Corrugate Tooling Verification������������������������������������������������������������������������������������� 11
4.2. Lens Verification��������������������������������������������������������������������������������������������������������� 13
• 4.2.1. Lens Tolerance Specifications���������������������������������������������������������������������������������13
• 4.2.2. Lens Visual Verification���������������������������������������������������������������������������������������������14
4.3. Assembled First Article Verification���������������������������������������������������������������������������� 15
4.4. Additional First Article Approval Criteria��������������������������������������������������������������������� 16
• 4.4.1. Cardboard Layer Alignment���������������������������������������������������������������������������������������16
• 4.4.2. Button Functionality��������������������������������������������������������������������������������������������������17
• 4.4.3. Velcro Alignment��������������������������������������������������������������������������������������������������������18
• 4.4.4. Assembly Quality�������������������������������������������������������������������������������������������������������18
5. Change Log������������������������������������������������������������������������������������������������������������������� 19
1
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
1. Introduction
This document provides the detailed technical specifications for the new Google Cardboard
launched at Google I/O 2015.
If you have any questions or comments about this technical specification, contact us at
wwgc@google.com.
2. Reference Information
2.1. Applicable Documents
All documents in the table below are located in the “Google Cardboard I/O 2015 Technical
Drawings” subdirectory of the manufacturer’s kit.
2
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
3. Design Specifications
This section provides the technical design specifications of Google Cardboard (I/O 2015
edition). It contains the detailed specifications for all major functional parts of Google
Cardboard, including lenses, capacitive button, mechanical body, sleeve, oleophobic coating
and printed artwork.
The detailed parameters, tolerances and performance requirements of these lenses are
given below. For lens optical prescriptions and technical drawings, see the documents 2.1.8.
3
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
Tab to screen 39.07 mm From the tab surface (facing display) to the
distance front surface of display coverglass
Table 2. Lens design optical parameters.
4
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
From left to right, Figure 2. Cardboard mechanical body: “chassis” part. Figure 3. Cardboard
mechanical body: “t-shirt” part. Figure 4. Cardboard mechanical body: “button” part.
See the table below for sleeve specifications. For the sleeve technical drawings, refer to
document 2.1.2. For the sleeve artwork, refer to the document 2.1.3.
5
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
Figure 6: oleophobic coating area on the user-facing side of the Cardboard chassis, as indicated by
the drawing above (number 2, shaded diagonally).
6
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
Figure 7. Cardboard button parts: (1) - “pillow”, (2) - “hammer”, (3) - “conductive strip”
7
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
Figure 8. Hook-and-loop velcros as used in Google Cardboard: (1) - oval “loop” velcro, (2) - oval “hook”
velcro, (3) - round “loop” velcro, (4) - round “hook” velcro
Parameters Value
Material Woven nylon
PSA type Acrylic-based adhesive
Color Black
Table 8. Oval velcro specifications.
8
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
9
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
For the high-resolution versions of this artwork, see the document 2.1.3.
Figure 10. Cardboard artwork placement: left - an isometric viewer diagram on the sleeve, center -
the assembly instructions on the chassis, right - QR viewer profile.
10
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
To ensure that all apps in the Google Cardboard app ecosystem work on your Google
Cardboard-inspired device, create a QR viewer profile using the Viewer Profile Generator.
Users will be prompted to scan this profile upon installing Google Cardboard apps
for Android and iOS, so this QR profile should be clearly placed on the device. The
recommended place for the profile is on the viewer itself, but you should also include it
on the viewer’s packaging, and/or on its website. You can find the detailed guidelines for
sizing, spacing and other details of the generated QR profile in the Viewer Profile and Badge
Guidelines.
From left to right, Figure 12. Critical “A” and “B” dimensions on the Cardboard “t-shirt” part, Figure 13.
Critical “C” dimension on the Cardboard “chassis” part
12
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
13
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
Figure 14. First example of lens visual verification: left - good lens, right - bad lens (notice the wavy
distortions of the straight line on the lens surface).
Figure 15. Second example of lens visual verification: left - good lens, right - bad lens (notice the
wavy distortions of the straight line on the lens surface).
14
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
Figure 16. Distance between the back surface to screen (distance D in table 13).
15
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
2. Button side flaps should have <0.5 x E-flute thickness misalignment, as it’s critical for
the button travel distance. If the units are assembled manually, the button side flaps
should be aligned first.
16
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
3. The bottom seam of the cardboard (next to the rubber band) should not have a gap of
more than 1 x E-flute thickness. Very importantly, that gap should be even across the
seam and should not be tilted/wedged.
4. Layers with phone-facing apertures should be securely glued together.
2. The button should be easily pushable down. After releasing it should spring back.
3. The conductive pillow should be centered within the phone-facing apertures, and
the bottom edge of the conductive pillow should be lined up with the corresponding
cardboard edge.
17
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
2. Upon closing and re-opening the velcros, the PSA should not start peeling off from the
cardboard.
18
GOOGLE CARDBOARD - TECHNICAL SPECIFICATION
VERSION 2.0 - SEPTEMBER 2015
3. The lenses should be free of contamination, such as glue, velcro loop/hook pieces,
cardboard chips or other debris.
5. Change Log
Version Date Change description
1.0 9/1/2015 Initial technical specification for Google
Cardboard (I/O 2015).
Table 16. Change log.
19