Академический Документы
Профессиональный Документы
Культура Документы
diamond tools
Superior products
2
Exploration
drilling
Epiroc can offer the equipment
needed for all underground and
surface exploration applications.
This includes core drilling rigs and
a full range of high technical and
high quality products; In-The-Hole
equipment such as drill rods and
casing; wire line and conventional
core barrels and diamond tools -
all designed to maximize our
customers’ profitability.
3
Content
Introduction Core bits & reaming shells - H-size��������������������������������24
HO (Double tube)������������������������������������������������������������������������������������������������������������� 24
More performance HO OS (Double tube oversize 3.830”)�������������������������������������������������������������� 25
How to select in three easy steps��������������������������������������������������������������������������� 6 HO3 (Triple tube)��������������������������������������������������������������������������������������������������������������� 25
Step 1 Application������������������������������������������������������������������������������������������������������ 6 H03 OS (Triple tube oversize 3,830”)���������������������������������������������������������������� 25
Step 2 Profile������������������������������������������������������������������������������������������������������������������ 6 HOTT (Triple tube)������������������������������������������������������������������������������������������������������������ 26
Step 3 Crown height������������������������������������������������������������������������������������������������� 6 HOTT OS (Triple tube oversize 3.830”)������������������������������������������������������������� 26
Bit matrix applications�������������������������������������������������������������7 HTW (Double tube thin wall)����������������������������������������������������������������������������������� 26
Bit selection chart����������������������������������������������������������������������������������������������������������������7 Core bits & reaming shells – P-size��������������������������������27
Recommended drilling parameters��������������������������������� 9 PO (Double tube)���������������������������������������������������������������������������������������������������������������27
Recommendation��������������������������������������������������������������������������������������������������������������� 9 PO3 (Triple tube)����������������������������������������������������������������������������������������������������������������27
Bit description������������������������������������������������������������������������������������������������������������������������ 9 POTT (Triple tube)�������������������������������������������������������������������������������������������������������������27
Impregnated bits crown profiles.�������������������������������������10 Conventional core bits & reaming shells���������������������28
Standard profiles����������������������������������������������������������������������������������������������������������������10 IEWS (Double tube conventional bit ID - 23,0 mm/OD - 37,3 mm)���� 28
Specialized profiles�����������������������������������������������������������������������������������������������������������11 AW34 (Double tube conventional) �������������������������������������������������������������������� 28
46TT (Double tube conventional) ����������������������������������������������������������������������� 28
Bits & reaming shells dimensions/serial number 48TT/LTK48 (Double tube conventional)������������������������������������������������������ 28
location���������������������������������������������������������������������������������������� 12 56TT (Double tube conventional)������������������������������������������������������������������������ 28
60TT/LTK60 (Double tube conventional)����������������������������������������������������� 29
RS++ line of reaming shells BX/BWG (Double tube conventional)�������������������������������������������������������������� 29
Introducing our new RS++ reaming shell������������������� 13 TBW (Double tube thin wall conventional)��������������������������������������������������� 29
SupraSpherical technology��������������������������������������������������������������������������������������� 13 TNW (Double tube thin wall conventional)�������������������������������������������������� 29
Wear indicator���������������������������������������������������������������������������������������������������������������������� 13 Down-the-hole motor diamond impreganted bits�� 30
Reaming shells������������������������������������������������������������������������� 14 NAVI N (75,3 mm/2.960”)������������������������������������������������������������������������������������������30
Surface setreaming shells������������������������������������������������������������������������������������������ 14 NAVI N Oversize (77 mm/3.032”)������������������������������������������������������������������������30
Reaming shell description������������������������������������������������������������������������������������������ 14 NAVI N Reaming shell gauge (75,6 mm/2.980”)�������������������������������������30
NAVI H (95,6 mm/3.760”)������������������������������������������������������������������������������������������30
One hole – one bit NAVI H Oversize (97,3 mm/3.830”)��������������������������������������������������������������������30
NAVI H Reaming shell gauge (96,1 mm/3.780”)��������������������������������������30
JET26 high crown design������������������������������������������������� 15 NAVI P (122 mm/4.800”)���������������������������������������������������������������������������������������������30
Jet 26 design�������������������������������������������������������������������������������������������������������������������������� 15 NAVI P Reaming shell gauge (122,7 mm/4.810”)�������������������������������������30
Navi bit description���������������������������������������������������������������������������������������������������������30
Wireline diamond impregnated core
Casing/rod shoes & casing bits���������������������������������������32
bits Casing shoes (for standard DCDMA casing installation)�������������������� 32
Core bits & reaming shells - A-size��������������������������������� 17 Rod shoes (same as casing shoe but with rod thread -
AO (Double tube)����������������������������������������������������������������������������������������������������������������17 Rods used as casings)�������������������������������������������������������������������������������������������������� 32
AGM/ATW/ADBGM (Double tube)�����������������������������������������������������������������������17 Casing bits (casing shoes with oversized crown outer diameter &
AOTK (Double tube)���������������������������������������������������������������������������������������������������������17 heavy duty blank)������������������������������������������������������������������������������������������������������������� 32
46.8 HAGBY (Double tube thin wall)��������������������������������������������������������������������17 Casing shoe/rod shoe�������������������������������������������������������������������������������������������������� 32
Casing bit�������������������������������������������������������������������������������������������������������������������������������� 32
Core bits & reaming shells - B-size�������������������������������� 18
BO(Double tube)���������������������������������������������������������������������������������������������������������������� 18 Bit & reaming shell gauges������������������������������������������������33
BGM/BTW/BDBGM (Double tube)��������������������������������������������������������������������� 18 Inner diameter gauges for bits������������������������������������������������������������������������������� 33
BOTK (Double tube)��������������������������������������������������������������������������������������������������������19 Outer diameter gauges for bits������������������������������������������������������������������������������ 33
56.6 HAGBY (Double tube thin wall)�������������������������������������������������������������������19 Outer diameter gauges for reaming shells��������������������������������������������������� 33
Professional Diamond Driller’s handbook����������������������������������������������������� 33
Core bits & reaming shells - N-size Bit testing tool box����������������������������������������������������������������������������������������������������������� 33
NO(Double tube)���������������������������������������������������������������������������������������������������������������20
NO OS (Double tube oversize 3.032”)��������������������������������������������������������������� 21 Core barrel stabilization�������������������������������������������������������34
NO2/NOTK (Double tube thin kerf)�������������������������������������������������������������������� 21 Inner tube couplings to compensate lenght of 6” long
NO2/NOTK OS (Double tube thin wall oversize 3.032”)��������������������� 21 Core barrel stabilizing reaming shell����������������������������������������������������������������� 34
NO3 (Triple tube)��������������������������������������������������������������������������������������������������������������� 22 Diamond impregnated locking & adapter couplings��� 35
NO3 OS (Triple tube oversize 3.032”)���������������������������������������������������������������� 22 Locking couplings with diamond rings ���������������������������������������������������������� 35
NTW (Double tube thin wall)����������������������������������������������������������������������������������� 22 Locking couplings with diamond rings for O-series������������������������������ 35
NGM/NDBGM (Double tube thin wall)������������������������������������������������������������ 23 Locking couplings with diamond rings for ExCore series����������������� 35
DEVICO 76 (Double tube directional drilling����������������������������������������������� 23 Adapter couplings (back ends) with diamond rings������������������������������ 35
4
A comprehensive range of Epiroc core
drilling tools designed to increase
productivity and profitability
Epiroc is among the world’s leading manufacturers of core drilling equipment. We have
supplied our market with high performance products over many generations. Our aim has
always been clear – to develop safe and environmental friendly products with sustainable
productivity. The Epiroc line of core drilling tools is a result from this effort.
The market´s most diverse and optimized crown profiles have been Get the best from your drilling
comprehensive line categorized into three types of equipment
Our line of In-the-Hole tools offers a drilling applications to simplify the Epiroc is a global company with
total solution; conventional and wire bit selection. Bit selection is much Customer Centres in more than
line core barrels, auto safe overshot, simpler for the driller and reduces 150 countries. Our dedicated sales
drill rods and casings, not to mention the number of bits needed on the job engineers are always on hand to
a wide range of diamond products site. discuss and solve your drilling
to make core drilling safe and problems. We offer service support,
Epiroc solutions
profitable. spare parts and consumables
The combination of Epiroc's In-the- packages for sustainable productivity.
A multitude of applications hole tools with Epiroc's Christensen And with our rigorously field tested
Each Epiroc core drilling bit covers surface core drilling rigs and Diamec products, you can be assured of the
a wider range of applications, fewer underground core drilling rigs, market’s best exploration drilling
bit types than before is needed to searching for the perfect vein to mine equipment.
do the same job. The Epiroc series is made easy.
of new matrices combined with
5
MORE PERFORMANCE - LESS BITS
As each of our core drilling bit covers As our bits provide superior perfor- All core drilling bits are divided into
a wider range of applications, fewer mance in a wider range of formations, three applications:
bit types than before are needed it becomes easier for the driller to
which translates to a reduction in find the best bit for the job, meaning Application 1
inventory. the new range is more forgiving. For soft to medium hard, very
abrasive to slightly abrasive and
This makes bit selection much simp- Each matrix type is available in very fractured to slightly broken
ler for the driller and reduces the various crown designs like the formations.
number of bits needed on the job Extended Channel Flush (ECF) for
site. It is easier for less experienced broken to competent formations, Application 2
drillers to select the optimal bit for the patented Jet profile for fast For medium hard to hard, abrasive
the job. cutting in competent formations and to slightly abrasive, moderately
Face Discharge (exFD) design for fractured to competent formations.
This not only improves productivity,
extremely broken and Triple tube
but also reduces the risk for
failing to meet deadlines for the
applications. Application 3
drilling contractor. The Epiroc Combining these features with For hard to very hard, slightly
series of matrices combined with different available crown heights, abrasive to nonabrasive, very
optimized crown profiles have been from 10-26 mm, means there is a bit competent formations.
categorized into three types of for every core drilling application.
drilling applications to simplify the bit
selection for the driller.
1. APPLICATION
2. PROFILE
Standard
Extended channel flush Jet profile/V torpedo: Face discharge (exFD):
(ECF): For fast cutting in competent For extremely broken and
For broken to competent formations, non-abrasive. Triple tube applications.
formations.
STEP 2
Select the appropriate
crown profile Specialized
CFF/CF: Taper: Sand:
Small/thin wall diameters Used in hole wedging Suitable for competent to
in conventional systems operations to ream wedged extremely broken or clay,
TT/LTK For broad range of hole after pilot bit. clay/sand, mixed formations,
formations. double tube applications.
3. CROWN HEIGHT
6
BIT MATRIX APPLICATIONS
Common
Rock Mohs numeric scales
Rock Matrix
hardness hardness
Diamond impregnated bit 1 - 10 1 - 15
selection chart
Soapstone
SOFT 1/1.5 1 2
Coal
SHRED
Bit for though ground condition Gypsum
for extremely broken and/or SOFT 2/2.5 2 3
Shale
SHRED
Diorite
AZURE
KUBY
MEDIUM Andesite 6 6 8
Softer brother of AZURE able
to cut harder rock. medium hard Syenite
to very hard rock . Broken to
competent ground. Diabase
KUBY
Quartz
FERRO
Chert
The bit designed specifically
for iron ore formation to extend VERY HARD Rhyolite 7.5 9 13
sufficiently life span in that very
challenging application. Very Jasperite
good performer as well in regular
EXTREMELY HARD Taconite 8/9 10 15
medium hard to hard formations.
NOTE: There are 2 existing rock group scales on the market 1-10 and 1-15. In the chart above we indicate application range for each of
our bit matrices withing both scales.
7
BIT MATRIX APPLICATIONS
Common
Mohs numeric
Rock
Rock hard- Matrix scales
hardness
ness
1 - 10 1 - 15 Popular Epiroc matrices
Soapstone
SOFT 1/1.5 1 2
Coal
Gypsum
2-4
SOFT 2/2.5 2 3
Shale
SHRED
Limestone
SOFT 3/3.5 3 4
Dolomite
3J
4-6
Slate
MEDIUM 4/4.5 4 6
Sandstone
Pegmatite
MEDIUM Basalt 5/5.5 FERRO 5 7
Gabbro
5-7
7AA.6
Diorite
AZURE
7AC
MEDIUM Andesite 6 6 8
7AA
Syenite
Diabase
7ACF
6-8
KUBY
8A.2
Gneiss
9AC
SC7 - 9
8 (11AC)
Quartzite
KS (S++)
HARD Glassy 7 8 11
12/14
8-9
Quartz
LAVA
Chert
VERY HARD Rhyolite 7.5 9 13
Jasperite
9
EXTREMELY
10
Taconite 8/9 10 15
HARD
Iron Ore
specific FERRO N/A N/A N/A
8
RECOMMENDED DRILLING PARAMETERS
Recommendation
The following information will assist you with proper bit selection or testing according to
ground conditions.
RPI/RPC Sample calculation N-size bits increase in the Weight On Bit (WOB).
Many factors influence the Controlling the flow of water can
RPM / Penetration rate = RPI (RPC)
performance of impregnated bits. be used as a method to sharpen
1200 / 8" per min = 150 RPI the bit. To sharpen a bit in the hole,
In addition to the type of formation
being drilled, factors such as hole 1200 / 20,3 cm per min = 59 RPC gradually reduce the flow of water
diameter, depth, ground conditions, while increasing the weight on the
type of drill, weight on bit, water Bit Optimum RPI bit to strip the bit and expose fresh
RPM
flow and RPM all have an impact size RPM (RPC) diamonds. Once the bit has been
on performance. The top priority of A 1500 - 1700 1650 250 (100) sharpened increase the flow of water
today’s drillers is performance. To and reduce the WOB as required.
B 1200 - 1450 1350 200 (79)
achieve optimum drilling production
while balancing bit life, a correlation N 900 - 1200 1100 170 (67) Water flow
between RPM and penetration rate H 750 - 950 850 130 (51) Water flow is a critical parameter.
has been developed for impregnated Insufficient or excessive water flow
P 600 - 750 650 100 (40)
diamond bits. This parameter is can result in poor performance.
referred to as Rotation Per Inch
RPI or RPC = RPM / Penetration rate. Size LPM (GPM) RPM
of advance (RPI) or Rotation Per
This chart has been developed as A 15-20 (4-5) 1650
Centimeter (RPC). This parameter can
a guideline for Epiroc impregnated B 30-36 (8-10) 1350
be utilized as a guideline to increase
diamond bits.
penetration rates while maintaining N 38-45 (10-12) 1100
reasonable bit life. “Polished” bit H 50-60 (13-16) 850
Often an indication that an P 75-84 (20-22) 650
impregnated bit has become
polished will be a reduction in Water flow may vary depending on the
specific application and therefore this chart is
torque and penetration rate, with an only to be used as a guideline.
Each diamond impregnated bit is delivered with recommended application and drilling parameters engraved on its body
specific for the bit. For more information, the QR-code to the right leads to Epiroc Exploration drilling tools web page
BIT DESCRIPTION
Optional –
indicates oversize
OD gauge (if not
shown the gauge
is standard
Crown profile
and height in Number of
mm waterways
Type of tool
Size & design Bit crown matrix
9
IMPREGNATED BITS CROWN PROFILES
V JET JET26
• High performance ”free cutting” bit.
• High productivity.
• Suitable for hard/competent formations.
• Suitable for non-abrasive formations.
10
IMPREGNATED BITS CROWN PROFILES
CFF CF
• Standard profile for small/thin wall diameters in conventional systems TT/LTK.
• Water way depth needs to be adjusted during drilling using metal file for better flushing control (CFF).
• Suitable for broad range of formations.
Taper Sand
• Profile used in hole wedging (directional drilling) • Suitable for competent to extremely broken or clay,
operations to ream wedged hole after pilot bit. clay/sand mixed formations.
• To improve core recovery in soft/ broken or loose zones.
• Alternative for the exFD profile when the exFD flushing
holes tend to clogg.
11
BITS & REAMING SHELLS DIMENSIONS/SERIAL NUMBER LOCATION
12
RS++ REAMING SHELLS
+ SupraSpherical technology
– for exceptional life span
+ Wear indicator
– for easy wear monitoring
13
REAMING SHELLS
Hole Hole
Standard Full-hole
Reaming Reaming
shell body shell body
SS - surface
set (natural
Optional -
diamonds)
indicates
or IMP -
extended
Optional - impregnated
lenght tool
indicates (synthetic
& number of
oversize OD diamonds)
diamond rings
gauge (if
(if not shown
not shown Optional -
means 1-RING
the gauge is indicates
type)
standard) full hole
type of
Shell body
Type of tool Size and
design
14
JET26 HIGH CROWN DESIGN
Long robust
segments.
15
The brightest shining star
AZURE
Bit matrix proven to drill exceptionally through the entire range
of medium hard to hard formations.
16
Wireline diamond impregnated
core bits & reaming shells A
SIZE
AO (Double tube)
Waterway Waterway
Part No, Description/Application Part No, Description/Application
width at ID width at ID
3760920443 BIT AO SHRED ECF13 6WW 3,83 mm/0.151" 3760920260 BIT AO KUBY V13 7WW 2,51 mm/0.099"
3760920444 BIT AO SHRED V13 7WW 2,51 mm/0.099" 3760918114 BIT AO LAVA ECF13 6WW 3,83 mm/0.151"
3760920017 BIT AO AZURE ECF13 6WW 3,83 mm/0.151" 3760920538 BIT AO LAVA V13 7WW 2,51 mm/0.099"
3760920018 BIT AO AZURE V13 7WW 2,51 mm/0.099"
3760918114 BIT AO FERRO ECF13 6WW 3,83 mm/0.151" Inner tube
Part No. Reaming shell type
extension
3760920259 BIT AO KUBY ECF13 6WW 3,83 mm/0.151"
3760955412 RShell AO SS RS++ N/A
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
17
B
SIZE
Wireline diamond impregnated
core bits & reaming shells
BO (Double tube)
Waterway Waterway
Part No. Description/Application Part No. Description/Application
width at ID width at ID
3760920453 BIT BO SHRED ECF13 8WW 3,99 mm/0.157" 3760920217 BIT BO KUBY ECF13 8WW 3,99 mm/0.157"
3760920454 BIT BO SHRED ECF16 8WW 3,99 mm/0.157" 3760920218 BIT BO KUBY ECF16 8WW 3,99 mm/0.157"
3760920455 BIT BO SHRED JET13 6WW 3,99 mm/0.157" 3760920221 BIT BO KUBY JET26 3WW 3,99 mm/0.157"
3760920456 BIT BO SHRED JET16 6WW 3,99 mm/0.157" 3760920219 BIT BO KUBY V13 7WW 2,54 mm/0.100"
3760920457 BIT BO SHRED V13 7WW 2,54 mm/0.100" 3760920220 BIT BO KUBY V16 7WW 2,54 mm/0.100"
3760920458 BIT BO SHRED V16 7WW 2,54 mm/0.100" 3760920329 BIT BO LAVA ECF13 8WW 3,99 mm/0.157"
3760920027 BIT BO AZURE ECF13 8WW 3,99 mm/0.157" 3760920330 BIT BO LAVA ECF16 8WW 3,99 mm/0.157"
3760920028 BIT BO AZURE ECF16 8WW 3,99 mm/0.157" 3760920331 BIT BO LAVA JET13 6WW 3,99 mm/0.157"
3760920029 BIT BO AZURE JET13 6WW 3,99 mm/0.157" 3760920332 BIT BO LAVA JET16 6WW 3,99 mm/0.157"
3760920030 BIT BO AZURE JET16 6WW 3,99 mm/0.157" 3760920333 BIT BO LAVA JET26 3WW 3,99 mm/0.157"
3760919148 BIT BO AZURE JET26 3WW 3,99 mm/0.157" 3760920334 BIT BO LAVA V13 7WW 2,54 mm/0.100"
3760920031 BIT BO AZURE V13 7WW 2,54 mm/0.100" 3760920335 BIT BO LAVA V16 7WW 2,54 mm/0.100"
3760920032 BIT BO AZURE V16 7WW 2,54 mm/0.100"
3760919039 BIT BO FERRO ECF10 8WW 3,99 mm/0.157" Inner tube
Part No. Reaming shell type
extension
3760918164 BIT BO FERRO ECF13 8WW 3,99 mm/0.157"
3760955420 RShell BO SS RS++ N/A
3760918584 BIT BO FERRO ECF16 8WW 3,99 mm/0.157"
3760955421 RShell BO SS RS++ FULL HOLE N/A
3760918174 BIT BO FERRO JET13 6WW 3,99 mm/0.157"
3760000058 RShell BO IMP N/A
3760918184 BIT BO FERRO JET16 6WW 3,99 mm/0.157"
3760955418 RShell BO 2-RING 10" SS RS++ 3760 0083 36
3760919140 BIT BO FERRO JET26 3WW 3,99 mm/0.157"
3760955419 RShell BO 3-RING 18" SS RS++ 3760 0126 46
3760919031 BIT BO FERRO V13 7WW 2,54 mm/0.100"
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
18
Wireline diamond impregnated
core bits & reaming shells B
SIZE
19
N
SIZE
Wireline diamond impregnated
core bits & reaming shells
NO (Double tube)
Waterway Waterway
Part No. Description/Application Part No. Description/Application
width at ID width at ID
3760920491 BIT NO SHRED ECF10 10WW 3,78 mm/0.149" 3760918284 BIT NO FERRO JET16 8WW 4,62 mm/0.182"
3760920492 BIT NO SHRED ECF13 10WW 3,78 mm/0.149" 3760919120 BIT NO FERRO JET26 4WW 4,62 mm/0.182"
3760920493 BIT NO SHRED ECF13 8WW 4,62 mm/0.182" 3760918851 BIT NO FERRO SAND13 8WW 5,08 mm/0.200"
3760920494 BIT NO SHRED ECF16 8WW 4,62 mm/0.182" 3760918852 BIT NO FERRO SAND16 8WW 5,08 mm/0.200"
3760920495 BIT NO SHRED EXFD13 6WW 8,0 mm/0.315" 3760920209 BIT NO KUBY ECF13 8WW 4,62 mm/0.182"
3760920496 BIT NO SHRED JET13 8WW 4,62 mm/0.182" 3760920210 BIT NO KUBY ECF16 8WW 4,62 mm/0.182"
3760920497 BIT NO SHRED JET16 8WW 4,62 mm/0.182" 3760920211 BIT NO KUBY JET26 4WW 4,62 mm/0.182"
3760920498 BIT NO SHRED SAND10 8WW 5,08 mm/0.200" 3760920270 BIT NO KUBY SAND13 8WW 5,08 mm/0.200"
3760920499 BIT NO SHRED SAND13 8WW 5,08 mm/0.200" 3760920271 BIT NO KUBY SAND16 8WW 5,08 mm/0.200"
3760920501 BIT NO SHRED TAPER8 8WW 3,78 mm/0.149" 3760920212 BIT NO KUBY V13 9WW 2,49 mm/0.098"
3760920502 BIT NO SHRED V13 9WW 3,78 mm/0.149" 3760920229 BIT NO KUBY V16 9WW 2,49 mm/0.098"
3760920503 BIT NO SHRED V16 9WW 3,78 mm/0.149" 3760920380 BIT NO LAVA ECF10 10WW 3,78 mm/0.149"
3760920075 BIT NO AZURE ECF10 10WW 3,78 mm/0.149" 3760920381 BIT NO LAVA ECF13 10WW 3,78 mm/0.149"
3760920076 BIT NO AZURE ECF13 10WW 3,78 mm/0.149" 3760920382 BIT NO LAVA ECF13 8WW 4,62 mm/0.182"
3760920077 BIT NO AZURE ECF13 8WW 4,62 mm/0.182" 3760920383 BIT NO LAVA ECF16 8WW 4,62 mm/0.182"
3760920079 BIT NO AZURE ECF16 8WW 4,62 mm/0.182" 3760920384 BIT NO LAVA EXFD13 6WW 8,0 mm/0.315"
3760920080 BIT NO AZURE EXFD13 6WW 8,0 mm/0.315" 3760920385 BIT NO LAVA JET13 8WW 4,62 mm/0.182"
3760920081 BIT NO AZURE JET13 8WW 4,62 mm/0.182" 3760920386 BIT NO LAVA JET16 8WW 4,62 mm/0.182"
3760920082 BIT NO AZURE JET16 8WW 4,62 mm/0.182" 3760920387 BIT NO LAVA JET26 4WW 4,62 mm/0.182"
3760919128 BIT NO AZURE JET26 4WW 4,62 mm/0.182" 3760920388 BIT NO LAVA SAND10 8WW 4,62 mm/0.182"
3760918276 BIT NO AZURE SAND10 8WW 5,08 mm/0.200" 3760920389 BIT NO LAVA SAND13 8WW 5,08 mm/0.200"
3760920084 BIT NO AZURE SAND13 8WW 5,08 mm/0.200" 3760920390 BIT NO LAVA SAND16 8WW 5,08 mm/0.200"
3760920085 BIT NO AZURE SAND16 8WW 5,08 mm/0.200" 3760920391 BIT NO LAVA TAPER8 8WW 3,78 mm/0.149"
3760920083 BIT NO AZURE TAPER8 8WW 3,18 mm/0.125" 3760920392 BIT NO LAVA V13 9WW 3,78 mm/0.149"
3760920086 BIT NO AZURE V13 9WW 2,49 mm/0.098" 3760920393 BIT NO LAVA V16 9WW 3,78 mm/0.149"
3760920087 BIT NO AZURE V16 9WW 2,49 mm/0.098"
3760919046 BIT NO FERRO ECF10 10WW 3,78 mm/0.149" Inner tube
Part No. Reaming shell type
extension
3760918264 BIT NO FERRO ECF13 10WW 3,78 mm/0.149"
3760955435 RShell NO SS RS++ N/A
3760918254 BIT NO FERRO ECF13 8WW 4,62 mm/0.182"
3760955436 RShell NO SS RS++ FULL HOLE N/A
3760918614 BIT NO FERRO ECF16 10WW 3,78 mm/0.149"
3760000167 RShell NO IMP N/A
3760918604 BIT NO FERRO ECF16 8WW 4,62 mm/0.182"
3760955432 RShell NO 2-RING 10" SS RS++ 3760 0095 38
3760918924 BIT NO FERRO EXFD13 6WW 8,0 mm/0.315"
3760955433 RShell NO 3-RING 18" SS RS++ 3760 0125 87
3760918274 BIT NO FERRO JET13 8WW 4,62 mm/0.182"
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
20
Wireline diamond impregnated
core bits & reaming shells NSIZE
3760920504 BIT NO OS SHRED ECF13 8WW 4,57 mm/0.180" 3760920394 BIT NO OS LAVA ECF13 8WW 4,57 mm/0.180"
3760920505 BIT NO OS SHRED ECF16 8WW 4,57 mm/0.180" 3760920395 BIT NO OS LAVA ECF16 8WW 4,57 mm/0.180"
21
N
SIZE
Wireline diamond impregnated
core bits & reaming shells
3760920518 BIT NO3 OS SHRED ECF13 8WW 4,5 mm/0.177" 3760955434 RShell NO OS SS RS++ N/A
3760920519 BIT NTW SHRED CF13 10WW 3,18 mm/0.125" 3760920233 BIT NTW KUBY CF16 10WW 3,18 mm/0.125"
3760920520 BIT NTW SHRED CF16 10WW 3,18 mm/0.125" 3760920268 BIT NTW KUBY JET26 4WW 3,18 mm/0.125"
3760920106 BIT NTW AZURE CF13 10WW 3,18 mm/0.125" 3760920411 BIT NTW LAVA CF13 10WW 3,18 mm/0.125"
3760920107 BIT NTW AZURE CF16 10WW 3,18 mm/0.125" 3760920412 BIT NTW LAVA CF16 10WW 3,18 mm/0.125"
3760919108 BIT NTW AZURE JET26 4WW 3,18 mm/0.125" 3760920413 BIT NTW LAVA JET26 4WW 3,18 mm/0.125"
3760918654 BIT NTW FERRO CF16 10WW 3,18 mm/0.125" Inner tube
Part No. Reaming shell type
extension
3760919100 BIT NTW FERRO JET26 4WW 3,18 mm/0.125"
3760955438 RShell NTW SS RS++ N/A
3760920216 BIT NTW KUBY CF13 10WW 3,18 mm/0.125"
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
22
Wireline diamond impregnated
core bits & reaming shells NSIZE
3760920489 BIT NGM SHRED CF13 10WW 3,18 mm/0.125" 3760920222 BIT NGM KUBY CF16 10WW 3,18 mm/0.125"
3760920490 BIT NGM SHRED CF16 10WW 3,18 mm/0.125" 3760920378 BIT NGM LAVA CF13 10WW 3,18 mm/0.125"
3760920073 BIT NGM AZURE CF13 10WW 3,18 mm/0.125" 3760920379 BIT NGM LAVA CF16 10WW 3,18 mm/0.125"
3760918394 BIT NGM FERRO CF13 10WW 3,18 mm/0.125" Inner tube
Part No. Reaming shell type
extension
3760918644 BIT NGM FERRO CF16 10WW 3,18 mm/0.125"
3760955431 RShell NGM SS RS++ N/A
3760920224 BIT NGM KUBY CF13 10WW 3,18 mm/0.125"
3760920038 BIT DEVICO AZURE TB10 6WW 5,0 mm/0.197" 3760955086 RShell DEVICO76 SS N/A
23
H
SIZE
Wireline diamond impregnated
core bits & reaming shells
HO (Double tube)
Waterway Waterway
Part No. Description/Application Part No. Description/Application
width at ID width at ID
3760920463 BIT HO SHRED ECF10 10WW 5,33 mm/0.210" 3760918847 BIT HO FERRO SAND16 8WW 8,99 mm/0.354"
3760920464 BIT HO SHRED ECF13 10WW 5,33 mm/0.210" 3760920242 BIT HO KUBY ECF13 10WW 5,33 mm/0.210"
3760920465 BIT HO SHRED ECF16 10WW 5,33 mm/0.210" 3760920201 BIT HO KUBY ECF13 8WW 5,33 mm/0.210"
3760920466 BIT HO SHRED EXFD13 8WW 8,99 mm/0.354" 3760920202 BIT HO KUBY ECF16 10WW 5,33 mm/0.210"
3760920467 BIT HO SHRED JET13 10WW 5,33 mm/0.210" 3760920243 BIT HO KUBY ECF16 10WW 5,33 mm/0.210"
3760920468 BIT HO SHRED JET16 10WW 5,33 mm/0.210" 3760920244 BIT HO KUBY EXFD13 8WW 8,99 mm/0.354"
3760920469 BIT HO SHRED SAND10 8WW 8,99 mm/0.354" 3760920245 BIT HO KUBY JET26 4WW 5,33 mm/0.210"
3760920470 BIT HO SHRED SAND13 8WW 8,99 mm/0.354" 3760920203 BIT HO KUBY SAND13 8WW 8,99 mm/0.354"
3760920471 BIT HO SHRED SAND16 8WW 8,99 mm/0.354" 3760920246 BIT HO KUBY SAND16 8WW 8,99 mm/0.354"
3760920472 BIT HO SHRED V13 11WW 2,51 mm/0.099" 3760920204 BIT HO KUBY V13 11WW 2,51 mm/0.099"
3760920039 BIT HO AZURE ECF10 10WW 5,33 mm/0.210" 3760920347 BIT HO LAVA ECF10 10WW 5,33 mm/0.210"
3760920040 BIT HO AZURE ECF13 10WW 5,33 mm/0.210" 3760920348 BIT HO LAVA ECF13 10WW 5,33 mm/0.210"
3760920041 BIT HO AZURE ECF16 10WW 5,33 mm/0.210" 3760920349 BIT HO LAVA ECF16 10WW 5,33 mm/0.210"
3760920042 BIT HO AZURE EXFD13 8WW 8,99 mm/0.354" 3760920350 BIT HO LAVA EXFD13 8WW 8,99 mm/0.354"
3760920043 BIT HO AZURE JET13 10WW 5,33 mm/0.210" 3760920351 BIT HO LAVA JET13 10WW 5,33 mm/0.210"
3760920044 BIT HO AZURE JET16 10WW 5,33 mm/0.210" 3760920352 BIT HO LAVA JET16 10WW 5,33 mm/0.210"
3760919138 BIT HO AZURE JET26 4WW 5,33 mm/0.210" 3760920535 BIT HO LAVA JET26 4WW 5,33 mm/0.210"
3760918456 BIT HO AZURE SAND10 8WW 8,99 mm/0.354" 3760920354 BIT HO LAVA SAND10 8WW 8,99 mm/0.354"
3760920047 BIT HO AZURE SAND13 8WW 8,99 mm/0.354" 3760920355 BIT HO LAVA SAND13 8WW 8,99 mm/0.354"
3760920048 BIT HO AZURE SAND16 8WW 8,99 mm/0.354" 3760920357 BIT HO LAVA TAPER10 10WW 5,33 mm/0.210"
3760920045 BIT HO AZURE TAPER10 10WW 3,18 mm/0.125" 3760920358 BIT HO LAVA V13 11WW 2,51 mm/0.099"
3760920046 BIT HO AZURE V13 11WW 2,51 mm/0.099"
3760918883 BIT HO FERRO ECF10 10WW 5,33 mm/0.210" Inner tube
Part No. Reaming shell type
extension
3760918414 BIT HO FERRO ECF13 10WW 5,33 mm/0.210"
3760955427 RShell HO SS RS++ N/A
3760918664 BIT HO FERRO ECF16 10WW 5,33 mm/0.210"
3760955428 RShell HO SS RS++ FULL HOLE N/A
3760918966 BIT HO FERRO EXFD13 8WW 8,99 mm/0.354"
3760901555 RShell HO IMP N/A
3760918424 BIT HO FERRO JET13 10WW 5,33 mm/0.210"
3760955423 RShell HO 2-RING 10.5" SS RS++ 3760011272
3760918434 BIT HO FERRO JET16 10WW 5,33 mm/0.210"
3760955424 RShell HO 3-RING 18" SS RS++ 3760015088
3760919130 BIT HO FERRO JET26 4WW 5,33 mm/0.210"
3760918845 BIT HO FERRO SAND13 8WW 8,99 mm/0.354"
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
24
Wireline diamond impregnated
core bits & reaming shells HSIZE
25
H
SIZE
Wireline diamond impregnated
core bits & reaming shells
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
26
Wireline diamond impregnated
core bits & reaming shells P
SIZE
PO (Double tube)
Waterway Waterway
Part No. Description/Application Part No. Description/Application
width at ID width at ID
3760920521 BIT PO SHRED ECF10 12WW 3,99 mm/0.157" 3760920417 BIT PO LAVA ECF10 12WW 3,99 mm/0.157"
3760920522 BIT PO SHRED EXFD10 10WW 11,0 mm/0.433" 3760920418 BIT PO LAVA EXFD10 10WW 11,0 mm/0.433"
3760920523 BIT PO SHRED JET13 10WW 3,99 mm/0.157" 3760920419 BIT PO LAVA JET13 10WW 3,99 mm/0.157"
3760920110 BIT PO AZURE TAPER10 12WW 4,78 mm/0.188" 3760920416 BIT PO LAVA TAPER10 12WW 11,0 mm/0.433"
3760920108 BIT PO AZURE ECF10 12WW 3,99 mm/0.157"
3760920109 BIT PO AZURE EXFD10 10WW 11,0 mm/0.433" Inner tube
Part No. Reaming shell type
extension
3760918544 BIT PO FERRO ECF10 12WW 3,99 mm/0.157"
3760955439 RShell PO SS RS++ N/A
3760918937 BIT PO FERRO EXFD10 10WW 11,0 mm/0.433"
3760000301 RShell PO IMP N/A
3760920227 BIT PO KUBY ECF10 12WW 3,99 mm/0.157"
3760920228 BIT PO KUBY EXFD10 10WW 11,0 mm/0.433"
27
CONV Conventional diamond impregnated
core bits & reaming shells
Part numbers in BOLD indicates most popular products. Good initial choice for each type of matrix.
28
Conventional diamond impregnated CONV
core bits & reaming shells
29
NAVI Down-the-hole motor
diamond impreganted bits
NAVI N Reaming Shell Gauge (75,6 mm/2.980") 3760954064 BIT H RSG NAVI KUBY - 2 3/8" API REG PIN
3760954039 BIT H RSG NAVI KUBY - NW ROD PIN
Part No. Description/Application
3760920345 BIT H RSG NAVI LAVA - 2 3/8" API REG PIN
3760954014 BIT N RSG NAVI AZURE-BW ROD PIN
3760920346 BIT H RSG NAVI LAVA - NW ROD PIN
3760954015 BIT N RSG NAVI KUBY-BW ROD PIN
3760920377 BIT N RSG NAVI LAVA-BW ROD PIN
NAVI P (122 mm/4.800")
Part No. Description/Application
NAVI H (95,6 mm/3.760") 3760954056 BIT P NAVI KUBY-2 3/8" API REG PIN
Part No. Description/Application 3760954041 BIT P NAVI AZURE-2 3/8" API REG PIN
3760954061 BIT H NAVI AZURE - 2 3/8" API REG PIN 3760920414 BIT P NAVI LAVA - 2 3/8" API REG PIN
Optional -
indicates
reaming shell
gauge OD (RSG)
or oversize OD
gauge (OS) - if
not shown
the gauge is
standard Indicates
NAVI type bit
for directional
drilling with Thread
mud motors connection
type
Type of tool Bit crown
OD size matrix
30
31
Shoes Casing/rod shoes & casing bits
Rod shoes (same as casing shoe but with rod thread - rods used as casings)
Size/Type Type Design Application Part No.
BO Impregnated Standard Shallow casing drilling 3760902307
BMO Impregnated Heavy duty Deep/difficult condition casing drilling 3760905590
NO Impregnated Standard Shallow casing drilling 3760900724
NO Impregnated Heavy duty Deep/difficult condition casing drilling 3760900725
NT Impregnated Standard Shallow casing drilling 3760902105
NT Impregnated Heavy duty Deep/difficult condition casing drilling 3761001496
NMO Impregnated Heavy duty Deep/difficult condition casing drilling 3760905591
NTW Impregnated Standard Shallow casing drilling 3760902133
HO Impregnated Heavy duty Shallow casing drilling 3760900723
HT Impregnated Heavy duty Deep/difficult condition casing drilling 3761001497
HMO Impregnated Heavy duty Deep/difficult condition casing drilling 3760905592
PO Impregnated Standard Shallow casing drilling 3760900726
PT Impregnated Heavy duty Deep/difficult condition casing drilling 3761001498
Casing bits (casing shoes with oversized crown outer diameter & heavy duty blank)
Size/Type Type Design Application Part No.
BW Impregnated Standard Deep/difficult condition casing drilling 3761001223
BW Impregnated Heavy duty Deep & extremely difficult condition 3761001224
NW Impregnated Standard Deep/difficult condition casing drilling 3761001221
NW Impregnated Heavy duty Deep & extremely difficult condition 3761001222
HW Impregnated Heavy duty Deep & extremely difficult condition 3702725900
HWT Impregnated Heavy duty Deep & extremely difficult condition 3702725800
32
Bit & reaming shell gauges Gauges
33
ACCESSORIES Core barrel stabilization
Core barrel
The best core barrel stabilization
stabilization Locking coupling
to minimize hole deviation using
standard products
• 3 support points for 3 m (10') or 6 m
Head assembly (20') core barrel distributed evently on its
entire length.
Adapter coupling
• Standard 6" reaming shell above bit,
locking coupling & standard 6" reaming
shell in the middle of core barrel between
two 1,5 m (5') or 3 m (10') outer tubes
stabilize core barrel in best possible way.
• To modify 3 m (10') or 6 m (20') core
Outer tube barrel, standard 6" reaming shell together
with inner tube coupling needs to be
placed between standard 1,5 m (5') or 3
m (10') outer tubes. To compensate this
Inner tube
additional reaming shell length, inner
tube coupling needs to be installed
between 1,5 m (5') or 3 m (10') standard
inner tubes. The only exception is for NO2
Stabilizer
size, where inner tube extension should
be placed between head assembly and
Reaming shell
standard inner tube.
Inner tube
coupling
Outer tube
Inner tube
Stabilizer
Reaming shell
Inner tube couplings to compensate lenght of 6" long core barrel stabilizing reaming shell
Item Part No.
AOTW inner tube coupling - Stabilizing Shell compensation 37600 150 04
BO inner tube coupling - Stabilizing Shell compensation 37600 150 06
BOTW inner tube coupling - Stabilizing Shell compensation 37600 150 07
NO inner tube coupling - Stabilizing Shell compensation 37600 150 08
NO2 Inner tube extension - Stabilizing Shell compensation 37600 150 09
NTW inner tube coupling - Stabilizing Shell compensation 37600 150 10
HO inner tube coupling - Stabilizing Shell compensation 37600 150 11
PO inner tube coupling - Stabilizing Shell compensation 37600 150 12
34
Diamond impregnated LCOUP
locking & adapter couplings ACOUP
Locking couplings with diamond rings for ExCore series type core barrels Short latch
drive tangs
Underground/horizontal-uphole drilling (increased life & core barrel stabilization)
Size Thread Application Core barrel design Blank type Latching end Part No.
B BO Underground drilling ExCore & O-Series Standard 2 short tangs 3760 0157 15
B BT Underground drilling ExCore & O-Series Standard 2 short tangs 3760 0120 86
B BMO Underground drilling ExCore & O-Series Standard 2 short tangs 3760 0157 17
BOTW BTT Underground drilling O-Series Standard No tang 3760 9174 63
BOTW BTW Underground drilling O-Series Standard No tang 3760 9174 62
N NO Underground drilling ExCore & O-Series Full Hole 2 short tangs 3760 0165 13
N NT Underground drilling ExCore & O-Series Full Hole 2 short tangs 3760 0165 14
N NMO Underground drilling ExCore & O-Series Full Hole 2 short tangs 3760 0165 15
H HO Underground drilling ExCore & O-Series Full Hole 2 short tangs 3760 0164 99
H HT Underground drilling ExCore & O-Series Full Hole 2 short tangs 3760 0165 00
Standard Full hole
H HMO Underground drilling ExCore & O-Series Full Hole 2 short tangs 3760 0165 01
Adapter couplings (back ends) with diamond rings (increased life & core barrel
stabilization)
Size Application Core barrel design OD Gauge Diamond ring Part No.
N Surface drilling Any Standard Surface set 3760 9038 06
N Surface drilling Any Oversize Impregnated 3760 9046 09
H Surface drilling Any Standard Surface set 3760 9006 50
35
Subjected to alterations without prior notice. © Epiroc Drilling Tools AB. All rights reserved. 2018.05.
A winning combination.
9866 0049 01
United in performance.
Inspired by innovation.
Performance unites us, innovation inspires us, and
commitment drives us to keep moving forward.
Count on Epiroc to deliver the solutions you need to
succeed today and the technology to lead tomorrow.
epiroc.com